SEALEY VS0050 Coolant Flush Jet Wash Gun Instruction Manual

SEALEY VS0050 Coolant Flush Jet Wash Gun

Product Information

• Product Name: Coolant Flush Jet Wash Gun
• Model No: VS0050

Thank you for purchasing a Sealey product. The Coolant Flush Jet Wash Gun is manufactured to a high standard and is designed to provide years of trouble- free performance when used according to the instructions and properly maintained.

Product Usage Instructions

It is important to follow the safety guidelines below when using the Coolant Flush Jet Wash Gun:

• Ensure that Health & Safety, local authority, and general workshop practice regulations are adhered to.
• Keep the work area clean and well-lit to avoid accidents.
• Keep children and bystanders away from the operating area to prevent distractions.
• Stay alert, avoid using the jet wash gun when tired or under the influence of drugs, alcohol, or medication, as inattention can lead to serious personal injury.
• Always use personal protective equipment such as eye protection, protective clothing, and gloves.
• Do not carry the jet wash gun with your finger on the trigger.
• Maintain proper footing and balance to ensure better control of the jet wash gun in unexpected situations.
• Dress properly, avoiding loose clothing, and jewelry, and keeping hair, clothing, and gloves away from moving parts.
• Jet Wash Gun Use and Care:

Follow these guidelines for the proper use and care of the Coolant Flush Jet Wash Gun:

• Do not force the jet wash gun. Use the correct jet wash gun lance for your application to ensure better and safer performance.

• Do not use the jet wash gun if there is air or water leaking.
  Disconnect and have it repaired as it can be potentially dangerous.

• Disconnect from the jet wash gun before making any adjustments, changing accessories, or storing.

Service
For maintenance and service of the Coolant Flush Jet Wash Gun, follow these guidelines:

• Have your jet wash gun serviced by a qualified repair person using only identical replacement parts to maintain safety.
• Using unauthorized parts may be dangerous and will invalidate the warranty.

Specific Pressure Washer Safety
When using the Coolant Flush Jet Wash Gun as a pressure washer, adhere to the following safety precautions:

• Disconnect from water and air supply before changing accessories, servicing, or performing any maintenance.
• Ensure all connections are tight and in good working order.
• Regularly check for damaged parts and repair or replace them before using the washer again.
• Keep a minimum distance of 15m between all persons and animals and the washer when in use.
• Use only clean water with the jet washer gun. Do not use non-filtered water or corrosive chemicals as they can damage the gun.
• Release residual pressure by turning off the air supply and water tap before disconnecting the hose.

Following these instructions and using the Coolant Flush Jet Wash Gun correctly and with care for its intended purpose will ensure safe and efficient operation. Failure to do so may cause damage, personal injury, and invalidate the warranty. Keep these instructions safe for future reference.

 SPECIFICATION

• MODEL NO:……………………………………………….. VS0050
• Air Inlet size:………………………………………………. 1/4 BSP
• Adaptor size(s):…………….Ø21, Ø31, Ø34, Ø39, Ø42mm
• Operating pressure:……………………… 87-145psi/6-10 bar
• Water inlet size:………………………………………………… 3/4”

ASSEMBLY

WARNING! Ensure that you read, fully understand, and apply the safety instructions before use.

LANCE CONNECTION
Both lances connect to the hand unit via a bayonet-type quarter-turn connector (fig.1).

SUPPLY HOSE CONNECTIONS
The supply hose for the water connects at fig.1.5 which is a quick-fit connector.
The air connection point is connected to the rear of the air flo w trigger fig.1.6.

OPERATION

• PRIMARY CHECKS
  Ensure that the water and air supply hoses and gun are correctly connected and that air can circulate around without water or air leaking.

• OPERATING THE UNIT
  Hold the spray gun firmly to counteract the recoil caused by the high-pressure jet of the water. Before operating, ensure that the lance is not directed at people, objects or animals prior to being directed at the object to be cleaned.
  To start spraying turn on the water supply and adjust the water flow (fig.1.1) turn on air supply and depress the trigger (fig.1.2) gently this will release air to the water causing a pressurized jet. Both water and air can then be adjusted in accordance with the job at hand.

• WHEN WASHING IS COMPLETED
  Release residual pressure by turning off the air supply and water tap before disconnecting hose,
  Discharge any residual pressure in the unit by pressing the trigger until no more air or water comes out of the nozzle.

• WARNING! Failure to discharge pressure could result in personal injury. Wipe the jet wash gun clean and dry.
  Store in a clean, safe, dry, frost-free and childproof location.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling center and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: The guarantee is 24 months from the purchase date, proof of which is required for any claim.

01284 757500 sales@sealey.co.uk
www.sealey.co.uk 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>