45K 602.207A WL 1000 Industrial Light Instruction Manual

45K 602.207A WL 1000 Industrial Light

OVERVIEW

1. ON / OFF Switch
2. Magnet
3. Hook
4. Battery level indicator (backside)
5. Charging Port
6. Flood LED
7. Spot LED
8. 1/4″ tripod thread

BATTERY LEVEL INDICATOR

CHARGING

ON / OFF

FLOOD

SPOT

Completely read through the operating instructions as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.

Intended use

The product is intended for illuminating work areas. The work lamp has a floodlight with three light levels, red light and flashing red light, and a spot light with two light levels. To change the operating mode between flood light and spot light, the operating button must be held down for about one second. The light head can be swivelled by 180°. The suspension bracket is equipped with magnets for attaching to metal surfaces. A 1/4″ thread is available for fixing to tripods. The device is charged via the USB-C interface.

General safety instructions

• The device must only be used in accordance with its intended purpose and within the scope of the specifications.
• The appliance and its accessories are not toys for children.
• Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
• Handle discharged batteries with care. Battery packs are a source of danger as they can cause very high short-circuit currents. Even if Li-Ion battery packs appear to be in a discharged state, they never discharge completely.
• Avoid physical impacts.
• Impacts, force and penetration of objects can damage the batteries. This can lead to leakage, heat and smoke generation, ignition or explosion.
• A short circuit between the battery pack electrodes may result in burns or fire.
• Protect the battery pack from heat as well as permanent sunlight and fire, e.g. do not leave it in the car in summer, as this can cause explosions.
• Charge the battery pack at ambient temperatures between -10°C and 40°C.
• Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
• The optimum charge level is between 50 % and 80 %.
• Use the mains/charger unit only inside closed rooms, do not expose to moisture or rain, otherwise there is a risk of electric shock.
• Fully charge the battery before using the unit.
• Charging is complete when the power indicator flashes.
• If the battery is weakly charged, the power indicator flashes.
• The battery can also be charged during operation.
• After charging, remove the charging cable and disconnect the power supply unit from the mains.

Safety instructions

Danger – powerful magnetic fields

• Powerful magnetic fields can adversely affect persons with active medical implants (e.g. pacemaker) as well as electromechanical devices (e.g. magnetic cards, mechanical clocks, precision mechanics, hard disks).
• With regard to the effect of powerful magnetic fields on persons, the applicable national stipulations and regulations must be complied with such as BGV B11 §14 „electromagnetic fields“ (occupational health and safety – electromagnetic fields) in the Federal Republic of Germany.
• To avoid interference/disruption, always keep the implant or device a safe distance of at least 30 cm away from the magnet.

Dealing with electromagnetic disturbances

• The device complies with the provisions and limit values for safety and electromagnetic compatibility in accordance with the Low Voltage Directive (LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
• Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.

Using artificial, optical emission (OStrV)

• Do not look into the radiation source.
• Temporary irritating optical effects (e.g. glare, (e.g. glare, flash blindness, after-images, impairment of colour vision) cannot be completely excluded. especially at low ambient brightness.
• The unit operates with light sources of risk group RG 1 (low risk) according to the valid standards for photobiological safety.
• The light source does not pose a hazard when used as intended.

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents. Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.

Technical Data (Subject to technical changes without notice. 22W51)

Luminosity flood

Low / Medium / High

|

30 / 430 / 1000 lm

Lighting time flood Low / Medium / High| approx. 84 / 13 / 4 hours
Luminosity spot Low / High| 70 / 250 lm
Lighting time spot Low / High| approx. 48 / 13 hours
Lightning rage| 100 m
CRI value| > 80
LED chip| High power LED
Photobiological safety| Risk group 1 (DIN EN 62471)
Protection class| IP X5
Ports| USB type C

1/4″ tripod thread

Power supply| Li-ion battery pack 3.7V / 5.2Ah
Battery recharging time| approx. 4 hours
Operating conditions| -10° … 40° C
Dimensions| 57 x 131 x 48 mm
Overall weight| 320 g (incl. batteries)

EU and UK directives and disposal
This device complies with all necessary standards for the free movement of goods within the EU – and the UK. This product, including accessories and packaging, is an electrical appliance that must be recycled in an environmentally appropriate manner in accordance with European and UK directives on waste electrical and electronic equipment, batteries and packaging, in order to recover valuable raw materials. Further safety and supplementary notices at: www.4K5tools.com For lithium-based primary and secondary batteries as well as other high performance batteries Only dispose of completely discharged batteries. If a battery is not completely discharged, precautions must be takento prevent short circuiting its terminals, e.g. isolation of the terminals. Notice about transporting products containing lithium batteries The battery has been built and tested according to the current UN manual 38.3. Effective protection against over-pressure, short- circuit, forceful breakage and reverse current are provided. Refer to the operating instructions for battery data. If no specific safety information is provided this means the quantity of lithium and energy level are below the currently applicable limits. In this case the battery, neither on its own nor installed in the device, is subject to international hazardous materials regulations. The transport of multiple batteries could be relevant for hazardous materials regulations, please observe the special conditions (e.g. packaging). Notice about disposal Electrical devices, mechanical devices, batteries, accessories and packaging should be recycled in an environmentally appropriate process to recover valuable raw materials. Please contact your municipal authority for information on corresponding disposal facilities and comply with the disposal and safety information at the collection sites. For EU countries Do not put electric devices into household garbage. The European directive for scrap electric and electronic devices dictates they must be collected separately and sent to an environmentally appropriate recycling facility. Electric devices are marked with an icon of a crossed-out garbage can. Batteries must be removed from the device before its disposal, the batteries must be disposed of separately.

Umarex GmbH & Co. KG – Laserliner –

• Möhnestraße 149, 59755 Arnsberg, Germany
• Tel.: +49 2932 638-300
• info@laserliner.com.
• Umarex GmbH & Co. KG
• Donnerfeld 2
• 59757 Arnsberg, Germany
• Tel.: +49 2932 638-300
• www.4K5tools.com.

References

• Werkzeug für Heim- und Handwerker: 4K5 BETTER EQUIPMENT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>