Jamoji

Jamoji Earbuds with a Microphone for Kids, Too Cool

Specifications

• BRAND: JAMOJI
• COLOR: HX-EPEM02
• FORM FACTOR: In Ear
• CONNECTIVITY TECHNOLOGY: Wired
• WIRELESS COMMUNICATION TECHNOLOGY: Bluetooth
• DRIVERS: 13. 5mm
• COMPATIBILITY: any mobile device or electronic device with a standard Headphone Jack
• PRODUCT DIMENSIONS: 0.5 x 42 x 0.75 inches
• ITEM WEIGHT: 0.96 ounces

Introduction

Turn up the music and flaunt your attitude! Pick from a variety of funny kaomoji designs to show off your silly side. These novelty headphones deliver clean, clear sound from their 13. 5mm drivers, making them ideal for listening to your favorite music. Use the in-line microphone and multipurpose button to make or receive calls. small, medium, and large silicone tips are included to provide a snug fit.

WHAT’S IN THE BOX

• Earbuds
• 3 sets of ear tips
• User Manual

HOW TO SETUP

Locate an open USB port on your computer if your headset has a USB connector. Connect the USB connector for the headset to the USB port. Your computer should detect and set up the headset for use, and when it’s prepared, it might show a notice message in the lower-right corner.

HOW TO CONNECT TO IPHONE

Connect the opposite end of the Lightning to 3.5 mm Headphone Jack Adapter to your headphones and the Lightning port on your iOS smartphone.

HOW MICROPHONE WORKS

In reality, microphones and headphones are pretty similar. A diaphragm can be found in both headphones and microphones. Both devices use vibrations, but headphones vibrate the diaphragm to produce sound, whilst microphones track sound vibrations to record them.

HOW TO USE MICROPHONE

Activate Settings & Select the “Sound” section under the “System” heading. Choose the microphone or recording device you want to use by clicking “Choose your input device” under the “Input” section. Speak into your microphone to check it out.

HOW TO FIX EARBUDS THAT WON’T WORK

• Activate the earbuds’ power supply. Some earphones include built-in batteries.
• Activate the audio device or raise the volume.
• Clear out the earbuds.
• Reconnect wired earphones after unplugging them.
• With wireless earbuds, check the Bluetooth connection.
• the earbuds to a different audio source.

HOW TO FIX WIRED EARBUDS

• To reveal the copper, sand the wires. Sand the thin enamel coating off of each wire, including the ground wire, before soldering.
• Connect by twisting and soldering.
• Electrical tape should be used to properly wrap each wire.
• Over the headphone cord, position and heat the heat-shrink tubing.

Frequently Asked Questions

Have wired earbuds got a microphone?

Even while not all earbuds include microphones, those that do usually employ one of these two well-liked technologies: Electret Condenser Microphones (ECM) Micro-Electro-Mechanical System (MEMS).

The wired earphones’ mic is located where?

The majority of our wired headphones (including those with microphones) have a 3.5mm jack connection known as a “TRRS” connector. View a sample image below. The Mic Input is located at the bottom of the jack.

My wired headphones won’t connect, why?

As dirt might obstruct the connection between the headphones and the port, this may be the problem. When a headphone jack stops working, the first thing you should check is the jack itself to determine how dirty it is.

Why won’t my iPhone recognize my wired headphones?

Check each earbud for debris on the meshes. Use a small, clean, dry brush with soft bristles to carefully brush debris out of all apertures. Reconnect your headphones firmly. Remove the case off your iOS device if it has one to achieve a solid connection.

Do all earbuds have microphones?

A microphone is not always included with headphones. Despite the fact that many headphones and earphones come with an internal or inline microphone, many low-cost models don’t. Furthermore, because they are made expressly to be headphones, professional and audiophile-grade headphones are rarely equipped with microphones.

Why does my wired headset work but there is no sound?

You might not be able to hear sounds from your headphones if the audio jack is damaged or broken, the wire is exposed, or both. Verify the condition of your audio jack. Check to see if your cable is broken. The headphones could be harmed even though you cannot physically see any damage.

Do wired headphones work with mobile devices?

You can use an adaptor to enjoy incredible audio quality if your headphones have a 3.5mm headphone connection. Simply connect your device to a USB-C to 3.5mm adapter, then insert your headphones into the adaptor. You can connect devices that use a common 3.5mm audio connection to your USB-C devices with the Samsung USB-C Adapter.

Why are there no headphone jacks on new iPhones?

Five years ago, Apple eliminated the headphone jack from the iPhone’s design, and they are not bringing it back. This design choice was made around the same time that Bluetooth earbuds and headphones became more popular, which makes it simpler to listen to music while travelling, commuting, or moving around the house.

Do people still use wired earbuds?

Despite being viewed as “ancient,” most consumers still like wired headphones over wireless ones. In reality, a 2016 survey found that wireless headphones only had 17% unit sales compared to 83% for wired headphones. There are several explanations for why individuals continue to favor traditional wired headphones.

Are wired headphones compatible with Android?

The standard charging port for iPads and Android smartphones is now USB-C. Wired headphones can also be connected to the USB-C connector. All you require is a basic, inexpensive adaptor.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>