BLUETTI B300S AC500 5000W Inverter Module Generator User Manual

BLUETTI B300S AC500 5000W Inverter Module Generator User Manual

Thank You!

Thank you for making BLUETT! a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional eco-friendly experience for our homes and our world. That’s why BLUETTI makes its presence in 70+ countries and is trusted by millions of customers across the globe.

Before You Begin

The information contained herein is subject to change without notice.
For the latest version of this user manual, please visit
https:/Awww.bluettipower.eu/pages/manuals

• The user manual contains instructions and notes on the operation and use of this unit
• BLUETTI recommends that you use genuine accessories from BLUETTI.
• BLUETTI shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the
• BLUETTI For your safety and benefit, please read carefully before using and keep it handy for future reference.

Safety Instructions

General Safety
BLUETTI products are developed to be safe and reliable. Please read this guide for important safety information about your device. The guide is intended to help you be more comfortable and productive while using this device. Failure to follow these guidelines for proper set up, use, and care for your device may cause damage to this unit and injury to yourself or others.

SAVE THESE INSTRUCTIONS!

• Always operate or store the unit within the specified temperature range.
• DO NOT expose the unit to fire, liquids, sweat, dirt or other contaminants, as that may cause explosion or other safety risks.
• DO NOT place the unit on an unstable or tilted surface.
• Make sure the place where you are using the unit is well ventilated and spacious. Keep away from children and pets.
• DO NOT ignore those warning signs on components or products made by manufacturers.
• DO NOT dismantle, cut, crush, puncture, or otherwise damage the unit inany way.
• DO NOT insert foreign objects into the fan, vents, ports, or other openings,.
• NEVER use a damaged battery or component. Improper use or misuse of damaged batteries may cause damage to your device or injury to yourself as a result of battery fluid leakage, fire, overheating, or explosion.
• Use approved battery and accessories ONLY. Improper use, or use of unapproved or incompatible batteries or components may result in a risk of fire, explosion, or other hazards, and may invalidate any approval or warranty.
• Turn off the unit IMMEDIATELY in case of malfunction.
• Use dry powder fire extinguisher in case of fire.
• DO NOT attempt to modify, replace the internal battery or any other component of the unit by anyone other than qualified personnel. If necessary, take it to an authorized service center as incorrect reassembly may result in a risk of fire or electric shock

Maintenance

• When not using the unit for extended periods of time, power off the unit and disconnect the AC charging cable from the outlet,
• Charge the unit to 50-70% SOC every 6 months for long-term storage.
• Clean the unit with a dry cloth gently and carefully.

Handling and Storage

• Use mechanical assistance as needed(e.g. trolleys and adjustable height workbenches).
• DO NOT stack anything on top of the unit either in storage or in use.
• Recommended storage temperature: -13-104°F/-25-40°C.

What’s In The Box

Standard Packaging

• Portable Power Station

• AC Charging Cable
  

• DC Input Cable
  

• Car Charging Cable

• User Manual

Below accessories are not included in standard packaging and can be purchased separately at https:/www.bluettipower.eu/

• 30A RV Cable

• Lead-acid Battery Charging Cable

• D300S PV Voltage Step Down Module

• Cigarette Lighter-F to DCS5521 Cable (24V)

• 32A Aviation Plug

AC Charging Cable: 59in/150cm
DC Input Cable: 59in/150cm. Aviation-MC4.
Car Charging Cable: 19.7in/50cm Cigarette Lighter Port-MC4.
30A RV Cable: Aviation-XT60, 315in/80cm;
XT60-SPC45,19.7in/50cm,
Lead-acid Battery Charging Cable: 19.7in/SOcm. Clamp-MC4.
D300S PV Voltage Step Down Module: 65in/165cm(output cable).
Cigarette Lighter-F to DC5521 Cable(24V): 283in/72cm.
32A Aviation Plug: Used to obtain 5000W AC output.Please refer to AC500 32A Aviation Plug Guide for details.

Note: All measurements are for reference oly. Package details are subject to change without prior notice

Product Overview

Diagram           

1. 24V Cigarette Lighter Port
2. 12V/30A RV Port
3. LCD Screen
4. USB-C PD30
5. 18W USB-A Port
6. USB-A Port
7. 5x13A AC Output (UK)
8. 3x10A+2x15A AC Output (AUS)
9.  32A AC Output
10. Wireless Charging Pad
11. Power Button
12. Battery Expansion Port
13. AC Input
14. DCI/DC2 Input
15. Communication Port

Specifications

AC500

General
Battery Capacity (With 1-6 B300S): 3072-18432Wh/60-360Ah
Dimensions (LWH): 205712.81141IN/520325358MM
Weight: 662LB/30KG
Discharging Temperature: -4-104°F/-20-40°C
Charging Temperature: -4-104°F/-20-40°C
Storage Temperature: -13-104°F/-25-40°C
Over Temnperature Protection (With B300S): Discharging 65°C (Recovery at 55°C)
Working Humidity: 10-90%

AC Output

Power:5000W
surge: 10000W
Voltage: 220-240VAC
Current:217A
Frequenc: 50/60Hz
Overload: 5000-6000W, 2min 6000-7500W, 55 7500-10000W, 500ms.

DC Output

Cigarette Lighter Port 1: 24VDC,10A
12V/30A RV Port 1: 12V, 30A Overload 418W, 2s
USB-A2: 5VDC, 3A
USB-AQC302: 18W Max. (3.612VDC, 3A)
*USB-C PD3.02: 100W Max. (5/9/12/15/20VDC, 3A; 20VDC, 5A)
Wireless Charging* 2: 15W Max

AC Input

Power 5000W Max.
Voltage 187-264VAC
Current 23A Max.
Frequency 47-63Hz

DC input

Power 3000W Max.
Voltage 12-150vDC
Current 15A Max.

Note: If there’s only one B300S, the combo gets a maximum of 4500W output.
‘When connecting B300S with T500 adapter or AC500 to the grid, B300S is able to self-heat and get charged even at -4°F/-20°C.

Operation

Powering On/Off
Startup and shutdown: Press and hold the power button on AC500 or B300S to turn the combo on or off.
AC/DC Output: Tap the ‘AC ON/OFF’ or ‘DC ON/OFF’ to enable or disable.

Note: Turn on the DC power to enable wireless charging When connected to the grid or PV, the combo turns on automatically. The combo turns off automatically upon 4 hours: a:Noinput and output b: AC and DC output off

LCD Screen
Homepage
This section displays the charge/discharge status and navigates to detailed product information.

a:PV Input
b: Battery Capacity
c: Date/Time
d: DC Load
e:DC ON/OFF
f: AC ON/OFF
g: Grid Input
h: AC Load

Settings
This section provides general setting configurations, including language, AC/DC output and input, ECO mode., machine type, system date/time, etc.

Note: Check all the settings before first use AC frequency and voltage can only be adjusted after AC output is turned off Voltage and frequency reference: EU/UK: 230V/S0Hz AU: 240V/50Hz

Data
This section provides all basic information including product, inverter and charger, battery, and alarm history.

Note: ‘Input & Output’ indicates the input and output status of this unit;
‘Battery Information’ indicates the connection status of battery pack(s); ‘Alarm History’ records all alarms generated which can be manually deleted.

When on this mode, the AC output will autormatically turn off after 4-hour low(<30W) or no load to save power.

Charging
AC Charging
(1) Consider the specifications of utility, AC outlet and charging cable before setting the Max. Grid Input Current.

Note: The Max. Grid Input Current is set at 10A by default and only works when AAC500 connects to the grid.
Email to BLUETTI Customer Service for password

Plug the AC500 into the wall outlet via the AC charging cable.

Generator Charging
Connect AC500 to the generator via the charging cable*.

Sold separately.

Note: BLUETTI recommends an inverter generator that delivers at least 5000W pure sine wave AC power. Voltage and frequency limit: EU/UK: 195.5-253VAC/4; 53Hz AU: 204-264VAC/47-53Hz

PV Charging
AC500 supports dual PV input with the DC input cable. Connect the solar panels (in series or parallel) to AC500 and CHECK the PV connection on LCD screen.

Note: Please make sure youg solar panels at each input comply with 12150V Vmp 12150V Power: 1500W Max.

Eg. Connect three BLUETTI PV350 solar panels in series to DC1 or DC2. BLUETTI PV350: Voc=465V Vmp=375V Current=9.2A Max. Total: Voc=46.5×3=139.5V Vmp=37.5×3=112.5V Current=9.2A Max.

• OCV: Open circuit voltage, also for Voc. The maximum voltage that the solar panel can produce with no load on it.
• Vmp: Voltage at maximum power. The voltage available when the panel is operating at its peak performance output.

The roof panel can also charge the AC500. If the panel’s OCV falls in 150-550V, please use the D300S to lower the voltage. Find details in D300S PV Voltage Step Down Module User Manual.

Car Charging
Connect the AC500 to the vehicle plug-in cigarette lighter port via the DC input cable and car charging cable.

Note Set the ‘Others’ as DCI/DC2 input source to enable car charging.
The Max. input current is 8.2A.

Lead-acid Battery Charging
Connect the AC500 with the lead-acid battery via the DC input cable and lead- acid battery charging cable.®

Note: Set the ‘Others’ as DCI/DC2 input source to enable lead-acid battery charging. Clamp the positive connector(red) to the positive battery terminal and negative(black) to the other.
The Max. input current is 8.2A

The lead-acid charging cable is for charging AC500 ONLY.

Dual Charging
Set the ‘PV’ as DCI/DC2 input source to enable AC/Generator + PV Charging.
Set the ‘Others’ as DC1/DC2 input source to enable AC/Generator + Adapter/ Car /Lead-acid Battery Charging.

Turn on the ‘PV Parallel Enable’ to enable excessive PV charging(>1500W, <150V)

Discharging

6144Wh x DoD x n + (load power) = charging time (estimated)
Take the AC500+2*B300S combo as an example.

Note: DoD refers to the Depth of Discharge, n is the local inverter efficiency.
DobD: 0%. DoD may vary depending on ambient-operating temperature and discharge rate. Load power and charging time are measured in Watt and Hour

Capacity Expansion

AC500 supports up to 6 expansion batteries for a total of 18,432Wh capacity.
Connect AC500 to B300S via the P150D battery expansion cable, or B300 via the P150D to PO90D cable. For more details, please refer to B300S or B300 User Manual

_ Note: _If there’s only one B3O0S connected, the combo delivers a maximum output of 45O0W. To pet SOOOW output, please connect at least one expansion battery to each expansion port

uPs
Plug the AC500 + B300S combo to a standard wall outlet or tie them to the grid. When the grid fails, the combo steps in and provides power for connected devices. 

The grid-tied UPS should be built by a qualified electrician. Please contact BLUETTI Customer Service for details.

ACS500 has 4 UPS modes-Standard, Time Control, PV Priority, and Customized UPS, and BLUETTI’s UPS mode guide is as follows:

1. The standard UPS mode is good for regions with unstable grid power supply.
2. The Time Control UPS mode will save your electricity bills by setting the charging and discharging time.
3. The PV Priority UPS mode is better for regions with plenty of sunlight all the year.
4. The Customized UPS mode allows you to design your power supply system.

Please refer to BLUETTI Support on YouTube for detailed instructions.

BLUETTI APP

Download the app from App Store or Google Play and follow the BLUETTI APP INSTRUCTIONS to better control and monitor the AC500 + B300S combo.

Power Lifting Mode
This mode can be enabled in BLUETTI App. When on this mode, the combo can power high drain pure resistive \oads’(sBOOO\/\/)‘ while the rated output power remains S000W.

_ Note: _Make sure the combo disconnects the p rid and the B300S doesn’t overload.
The ACS00 detects the resistance of devices and adjusts the output voltage automatically. The mode fails when the AC500 drops below 70% of its rated voltage.

Includes heaters, irons or any other devices consisting of heating elements only.

Appendix

FAQs (Frequently Asked Questions)

Can | use third-party solar panels to charge this product?

Yes, you can. As long as the specs of solar panels on DC1or DC2 input fall in below range: OCV&VmMp: 12150V Input Power: 1500W Max. With the same power connector (MC4)

Why can't the unit be charged when the solar panels are connected?

Please follow below steps: Press the ‘PV’ on LCD screen to check whether the solar panels are connected successfully. Check the connection of solar panels and the PV input cable. If the symptom persists, please contact BLUETTI Customer Service.

How long will it take to switch the UPS?

20ms.

How to upgrade the firmware?

Connect the unit with BLUETTI App, then you can over-the-air (OTA) upgrade the firmware including ARM, DSP, HMI, and BMS.

Technical Support

Should you require any further assistance, please do not hesitate to contact BLUETTI Customer Service.

For more information, please visit:

@BLUETTI Support
@ BLUETTI Official

@bluettiinc

@BLUETTIEUCLUB
@Bluetti Europe
@bluettiine

@ bluetti_europe
@bluetti_us

service@bluetticom

EU REP

UK REP

Documents / Resources

| BLUETTI B300S AC500 5000W Inverter Module Generator [pdf] User Manual
B300S AC500 5000W Inverter Module Generator, B300S, AC500 5000W Inverter Module Generator, 5000W Inverter Module Generator, Inverter Module Generator, Module Generator
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>