KEUCO 59545 010001 IXMO Round Bath Filler Instruction Manual
- June 12, 2024
- KEUCO
Table of Contents
KEUCO 59545 010001 IXMO Round Bath Filler
Product Information
- Product Name: IXMO
- Model Number: 59545
- Manufacturer: Unknown
- Intended Use: Bath filler/spout for use in bathrooms and WCs.
- Operation only with potable water.
- Suitability: Indoor installation only
- Maximum Water Flow: Approximately 23 l/min
- Recommended Water Pressure: Minimum 0.5 bar, recommended 1-5 bar
- Maximum Water Pressure: 10 bar
- Maximum Static Pressure: 16 bar
Product Usage Instructions
- Before installation, ensure that the product is suitable for your intended use in bathrooms and WCs.
- Only operate the product with potable water.
- Install the product indoors in frost-free places only.
- Ensure that the water flow is not obstructed during installation.
- Flush potable water pipes thoroughly before and after installation, following the guidelines of EN 806 and 1717, as well as DIN 1988.
- Use only neutrally netting silicone for installation.
- Test connections for leaks with water pressure.
- If the static pressure exceeds 5 bar, install a pressure reducer.
- Refer to the provided installation dimensions for proper installation.
- Assemble the product in reverse order for servicing.
- For spare parts, refer to page 11 for order numbers.
- For warranty and care information, please refer to the attached warranty and care instructions. Please note that this product information and usage instructions are based on the information provided in the user manual. For specific installation requirements and guidelines, it is recommended to consult a professional installer or contact the manufacturer directly.
Models
-
59545 010001
-
59545 010101
-
59545 030001
-
59545 030101
-
59545 050001
-
59545 050101
-
59545 070001
-
59545 070101
-
59545 130001
-
59545 130101
-
59545 170001
-
59545 170101
-
59545 370001
-
59545 370101
-
59545 010002
-
59545 010102
-
59545 030002
-
59545 030102
-
59545 050002
-
59545 050102
-
59545 070002
-
59545 070102
-
59545 130002
-
59545 130102
-
59545 170002
-
59545 170102
-
59545 370002
-
59545 370102
Mounting Dimensions
- 59545 XX0001
Important information
Important information, please read!
These instructions are for both the installer for installation and the user for operation and maintenance of the product. After installation, please hand them over to the user to keep.
Symbols and explanations
- Attention: Warning against bodily injury or damage to property.
- Note, tip or reference
- Water flow
- Optional/accessories
- No water flow
Intended use
- Bath filler/spout for use in bathrooms and WCs.
- Operation only with potable water.
- Product is only suitable for installation indoors!
- Attention! Only install in frost-free places.
Technical specifications
- Flow at 3 bar pressure: approx. 23 l/min
- Pressure: min. 0.5 bar/recommended 1-5 bar
- Operating pressure: max. 10 bar
- Test pressure: 16 bar
Install a pressure reducer for static pressures above 5 bar.
Installation
- Flush potable water pipes thoroughly before and after installation (observe EN 806 and 1717, as well as DIN 1988).
- Use only neutrally netting silicone.
- Test connections for leaks with water pressure.
Servicing, refer to Assemble in reverse order
Spare parts
For spare parts with order numbers
For warranty and care information please refer to the attached warranty and care instructions.
CONTACT
KEUCO UK Ltd
- Amersham House Mill Street
- GB-Berkhamsted HP4 2DT
- Phone: +44 10442865220
- E-Mail: [email protected]
- www.keuco.com