Allway OE10 Open Earbuds Instructions

June 4, 2024
Allway

Allway OE10 Open Earbuds

Allway OE10 Open Earbuds PRODUCT-IMG

Packing list

Allway OE10 Open Earbuds FIG \(1\)

Configuration

  1. Product Name: Open Earbuds 10
  2. Product Size: 486316mm
  3. Bluetooth Version: BTS.3
  4. Impedance: 210
  5. Frequency Band : 2.400GHz-2.4835GHz
  6. Charging time : 1.5h
  7. Standby time : 16h
  8. Type of charge : Type-C
  9. Product Model: OElO
  10. Distance: > 10m
  11. Speaker Diameter: 16.2mm
  12. Frequency Response: 20Hz-20KHz
  13. Battery: 130mAh/450mAh
  14. Usage time : 4.5h
  15. Input: 5V = 0.5A
  16. Material: PC+ABS+TPE
  17. Weight: 13.Sg
  18. Number of connections: 2

Specifications are laboratory test data.
Playback times are from laboratory tests using the SBC format at 60% volume level and are subject to variation in equipment settings, environment, usage and many other factors.

Overview

Allway OE10 Open Earbuds FIG \(2\)

  1. Touch area
  2. Noise cancelling mic
  3. Led
  4. Sound drain hole
  5. Sound output hole
  6. Charging pin
  7. Sound drain hole
  8. Call mic

Operation instruction

Power ON

  • Touch ls to switch on. (separate operation required).
  • Automatic switch-on after removing the earbuds.

Power OFF

  • Automatic switch-off of the earbuds after a full charge.
  • Automatic switch-off after lOmin disconnection from Bluetooth.
  • Automatic switch-off when the power is exhausted.
  • Long press touch area 6 seconds to shut down.

Pairing

  • Release the touch area after 3s long press to enter pairing mode.
  • When there is no pairing record, automatically enter pairing mode after power on.
  • when there is a pairing record, automatically connect back to the paired device after power on.

Reset

Press and hold the touch area for !Os in the power-on state.

Multi-Device Connectivity

The OElO can be connected to two devices at the same time: when the earbuds is in pairing.Can be connected by two devices at the same time; pairing timeout requires re-entry into pairing mode.

Bluetooth pairing

Step 1 : Turn on your device’s Bluetooth and remove the Earbuds.Allway
OE10 Open Earbuds FIG \(3\)

CD When the device is connected to the earbuds, the battery level of the earbuds is displayed.

Step 2: Select “All way OEl0” to connect.

Operating Instructions

  • Call Control
    Answer/hang up: double touch Reject: long touch 3s

  • Music Control
    Play/pause: two touches Previous/next song: 3 touches left and right ear

  • Volume Control
    Volume up/down: single touch left and right ear touch zones

Charging Instructions

Charging The Storage bag:
Using a device with a USB port to which it is connected for charging.

To Charge The Earbuds.Allway OE10 Open Earbuds FIG
\(6\)
Place the earbuds into the Storage bag to charge it, at which point Bluetooth is automatically disconnected.

Note : When the earbuds cannot be charged, please charge the storage bag first

Indicator Light Description

Allway OE10 Open Earbuds FIG
10

Wearing Instructions

  1. Remove the earbuds and rotate the earpiece so that it is at 30° to the body of the earbuds
  2. Rotated from the top of the ear to the right position
  3. Once the earbuds is stable, gently press it against your ear

Safety Information

  1. Never disassemble the earbuds. There are no user-serviceable parts inside,
  2. Do not expose the earbuds to temperatures below 32 F(O 0C) or to temperatures above 113°F(45°C).
  3. Do not use the earbuds in a thunderstormstorm. This could prevent the earbuds from working properly, and also increase your chance of being electrically shocked.
  4. Do not use oil or any volatile liquid to clean this product.
  5. Do not listen at high volumes for extended periods of time.
  6. Do not use the earbuds in traffic.
  7. Do not use the earbuds any time it would be dangerous to be unaware of noises around you.

Allway (1) Year Limited Warranty

All way warrants to the original retail purchaseer that this product is to be free from defective materials and workmanship for a period of oneyear from the date of purchase, if it is properly used and maintained. If this product proves defective in either material or workmanship, Allway, at its option, will (a) repair the product, or (b) replace the product, at no charge for parts or labor. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, Allway at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to themounting surface may be required where a new model is substituted. Allway assumes no responsibility or liability for such modification. To obtain a repair or replacement under the terms of this wrarranty, please return to dealer first, if possible, and the dealer will direct you accordingly for reepairs or replacement. You will be required to submit a copy of the original receipt.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser,

Limitations:

  • This limited warranty does not cover failure ofthe product resulting from improper installation, misuse, abuse, accident, neglect, mishandlin& or wear from ordinary use or environmental deterioration.
  • This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
  • This limited warranty is null and void for products not used in accordance with Allway’s instructions.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals