MAXIM LIGHTING 24176 Zeta Large LED Pendant Instruction Manual
- June 12, 2024
- MAXIM LIGHTING
Table of Contents
24176 Zeta Large LED Pendant
PRODUCT NAME: Zeta Large LED Pendant
ITEM NUMBER: 24176
Please consult a qualified electrician for hanging fixture and wiring.
Light Source: LED Integrated 24W
Made in China
Before Getting Started
Read the instructions carefully prior to assembling
the product.
When you open the package with a sharp tool
like a cutter knife, be careful not to damage the
components inside.
Carefully remove all packaging materials and
retain for future use.
Keep all hardware parts and packaging out of
reach of small children.
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the
product.
Ensure that you have all required contents for
complete assembly.
Take care when lifting. Assemble the product in
close proximity to where you intend to position the
item.
Do not over tighten the screws and bolts as this
may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from
children.
Lamp Care Instructions
Carefully read through the instruction
sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect
from power source before assembling or
cleaning.
WARNING: Wires need to be connected
to driver found in canopy and should
not be connected directly to power
source or a short may occur.
Only use the recommended bulb type and do
not exceed the maximum wattage as it could
cause fire.
Do not plug the product in if cord is torn
or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder
reduces the appearance of fingerprints and
other smudges.
For respective shade surfaces, use the
appropriate cleansers, i.e. glass cleaner,
acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner.
Periodically (every 90 days) make sure that
the screws are fully tightened.
Prolonged exposure to heat sources may
cause glazing, melting and scorching, or even
cause color to fade.
Content
Before getting, started, ensure the package contain the following components:
This fixture must be Installed with compatible dimmer types only.
Improper wiring of fixture and/or use of Incorrect dimmers will
cause catastrophic failure and void the warranty.