Puravent Mobile Air Cleaner Instructions

: June 4, 2024
: puravent

Table of Contents

Puravent Mobile Air Cleaner
Safety Considerations
TECHNICAL DATA
Description
Operation
Service
Accessories
Warranty
TROUBLESHOOTING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Puravent Mobile Air Cleaner

Puravent-Mobile-Air-Cleaner-product

Safety Considerations

Read all instructions before attempting to operate this machine and save these instructions.

Warning!
When using electric machines, basic safety precautions should always be followed to reduce the risk of ﬁ re, electric shock and personal injury, including the following:

Work area environment
Don´t expose the machine for rain. Don´t use it in damp or wet locations or in presence of ﬂ flammable liquids or gases.
Overload
Never let the machine operate fully throttled. Always follow the regulations pertinent to the material you are working with. Don´t use the machine for purposes that it isn´t intended for.
Don´t abuse cord
Never pull the machine by a cord. Keep cord from heat and sharp edges. Check the electric cable regularly if damaged. The cord should not be wrapped around the handle during operation.
Important measure
With cleaning and maintenance on the machine, the power cable should be disconnected from the supply.
Maintain the machine with care
Keep the machine clean and check that the hose (extra accessories) is undamaged and that all gaskets are tight. Follow instructions. Keep handles dry and free from oil and grease.
Checking for damage
Before further use of the machine, it should be carefully checked that the machine is undamaged. If there are any damaged parts these should be repaired by a Dustcontrol authorized service center.
Warning
Use only accessories and replaceable parts which are available in the Dustcontrol catalog. When using faulty parts or nonoriginal parts (especially ﬁlter) the machine could leak out unhealthy dust which can cause personal injuries.

TECHNICAL DATA

HxWxL 380 x 340 x 495 mm
Weight 13 kg
Outlet φ 125 mm
Hose length (extra accessories) 5-10 m (φ 125)
Flow, at open outlet 500 m3/h
Neg pressure max 400 Pa
Power consumption 230 V, 210 W, 115 V 50/60 Hz 145 W
Degree of separation, EN 1822-1 HEPA 13

*Soundlevel/:**

Speed 1 45 dB(A)
Speed 2 65 dB(A)

Sound level at 1,6 m height and 1 m distance according to DIN EN ISO 3744 in free space and at maximum airflow.

Description

The DC AirCube 500 air cleaner is intended for cleaning the air in a work area and is intended for use as a complement to spot extraction. Air is passed through a combination of preﬁ later and a microﬁlter. The microﬁlter is a HEPA 13 ﬁlter that separates particles to 99.95%. The pre- ﬁlter separates the majority of the coarse particles and thereby prolonging the life of the microﬁ later. When a loss of suction capacity is experienced the pre-ﬁlter should be changed. If the suction capacity does not increase after the pre-ﬁlter change then the Hepa ﬁ lter should also be changed.

NOTE:
When using a long tube or covering the outlet, the warning light (ﬁ lter light) can be lit. Check when changing the ﬁlter that the outlet is free (warning light).

The fan has two-speed settings which allow for economical running, for example during the night. The DC AirCube 500 can also be used to discharge air from workplaces that must be kept under negative pressure. A 125 mm hose can be attached to the fan outlet where necessary.

Optional power outlet 240 V 1200 W.

Operation

Connect the machine to a suitable power source according to the speciﬁ cation of the machine. When using an extension cable with the machine, ensure that the connection is water-tight and the extension cable is suitably rated. Connect the machine to a suitable power source according to the speciﬁ cation of the machine. When using an extension cable with the machine, ensure that the connection is water-tight and the extension cable is suitably rated.

Service

While performing cleaning or maintenance on the machine, the unit should be off and disconnected from the power supply. When the suction is reduced, due to the filters become clogged. The pre-filter should be changed. Turn the “soft surface out and the “hard” surface towards the HEPA- filter.

If the suction still is weak, the HEPA filter should be changed too. With heavy dust loads, the life of the filters are shorter. Use only the original spare part filter 4080. Use suitable breathing protection and do the operation in a closed room. The used filter should be sealed in a plastic bag and disposed of according to approved methods.

Check regularly that the electrical cable is not damaged in any way. With the replacement of the cable and contact, use only waterproof replacements. The DC AirCube 500 should be performance tested and checked at least once per year or more frequently if subject to intensive use. Because this machine is used with dangerous sub-stances maintenance is vital, and worn parts should be replaced. Never compromise the function of the DC AirCube 500, use only original spare parts. The fan is maintenance-free.

When light is on, it’s time for service!

Accessories

Description	Part no
Hose φ 125 mm	2420
Hose clamp	4138
Prefilter	42690
Microfilter	42692
Funnel	42753
Bracket	42724

Other accessories — see Dustcontrol catalog.

Warranty

The warranty period for this machine is two years and covers the manufacturers’ faults. The warranty is valid under the condition that the machine is used under normal conditions on the task for which it was designed and is maintained properly. Normal wear is not covered by this warranty. Service performed by other than Dustcontrol or its authorized agent voids automatically the warranty. No other warranty express or implied is applicable.