soundcore P3 Noise Cancelling Earbuds User Guide
- June 12, 2024
- Soundcore
Table of Contents
soundscore P3 Noise Cancelling Earbuds
Product Information
The Soundcore P3 is a wireless earbud with advanced features for an immersive listening experience. It comes with a charging case that provides convenient storage and charging for the earbuds. The earbuds have a sleek design and are available in multiple sizes to ensure a comfortable fit for all users. The earbuds feature Bluetooth 5.2 technology for seamless connectivity and a range of up to 15 meters (49 feet). With a waterproof rating of IPX5, the earbuds are resistant to sweat and light rain.
Specifications:
-
Input: 5 V 0.35 A
-
Battery capacity: 63 mAh x 2 (earbuds); 800 mAh (charging
case) -
Charging time: 3 hours
-
Playtime (varies by volume level and content):
-
With ANC mode turned on: Up to 9 hours (Total 40 hours with the
charging case) -
With ANC mode turned off: Up to 10 hours (Total 50 hours with
the charging case)
-
-
Driver size: 11 mm x 2
-
Frequency response: 20 Hz – 20 kHz
-
Impedance: 16 ohms
-
Waterproof level: IPX5
-
Bluetooth version: V 5.2
-
Bluetooth range: 15 meters / 49 feet
Product Usage Instructions
Charging:
To charge the earbuds, connect the charging cable to the charging case and a
power source. Alternatively, position the charging case at the center of your
wireless charger for wireless charging. The LED indicators on the charging
case will indicate the
charging status.
- Fully dry off the earbuds and the USB port before charging.
- Use a certified USB-C charging cable and charger to prevent any damage.
- Fully charge both the earbuds and the charging case before the first use.
- Place the earbuds in the charging case and close it.
- Connect the charging case to the power supply by using a USB-C charging cable. Alternatively, position the charging case at the center of your wireless charger for wireless charging. The LED indicators on the charging case indicate the charging status.
Wearing:
- Choose the EarTips that fit your ears best.
- Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.
Your earbuds come with multiple pairs of EarTips, among which Medium-sized are pre-installed.
Powering On/Off:
To power on the earbuds, press and hold the button on both earbuds simultaneously until the LED indicators turn on. To power off the earbuds, repeat the same process.
- Open the charging case, the earbuds will automatically power on.
- To power off, place the earbuds in the charging case and close it
- The earbuds will automatically power off after 30 minutes if no device is connected.
Bluetooth Pairing:
- Ensure that Bluetooth is enabled on your device.
- Select “Soundcore P3” on your device’s Bluetooth list to connect. When successfully connected, the LED indicators on the charging case will turn white for 3 seconds.
- Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
- Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
- Mono mode: When Bluetooth connected, you can use either one of the earbuds only by placing the other one into the charging case.
- When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
- When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.
Controls:
The earbuds have various controls for different functions:
-
Stereo Mode:
- Play/Pause: Press twice (R or L earbud)
- Next track: Press twice (R or L earbud)
- Switch ambient sound modes (Noise Cancellation/Normal): Press
and hold for 2 seconds (R or L earbud)
-
Mono Mode:
- Play/Pause: Press twice
- Answer a call: Press twice
- End/Reject a call: Press and hold for 2 seconds
- Activate Siri or other voice assistant software: Press and hold for 2 seconds
Soundcore App:
The Soundcore App allows you to customize the settings of your earbuds. You can adjust the equalizer, update the firmware, and access additional features. Ensure that the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed. During the upgrade, ensure the earbuds are being charged and avoid any operation.
Noise cancellation: Choose an active noise cancellation mode to reduce ambient noise according to your surroundings.
- Transport : Targets low-end frequencies like engine and road noise for peaceful journeys and commutes.
- Outdoor : Reduces ambient sounds in cities for less distractions.
- Indoor : Reduces voices and mid-frequency noise from coffee shops and other inside spaces.
- Earbuds firmware upgrade: You will be informed once the new version of firmware is detected when you connect the earbuds with the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed. During the upgrade, ensure the earbuds are being charged and avoid any operation.
Reset:
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the case for 10 seconds until the 3 LED indicators flash white for 3 times and then flash white in sequence continuously. This confirms that the reset was successful and your earbuds can be connected normally.
Specifications
Specifications are subject to change without notice.
- Input 5 V 0.35 A
- Battery capacity 63 mAh x 2 (earbuds); 800 mAh (charging case)
- Charging time 3 hours
- Playtime (varies by volume level and content)
- Up to 10 hours (Total 50 hours with the charging case)
- Playtime (with ANC mode turned on) Up to 9 hours (Total 40 hours with the charging case)
- Driver size 11 mm x 2
- Frequency response 20 Hz – 20 kHz
- Impedance 16 Ω
- Waterproof level IPX5
- Bluetooth version V 5.2
- Bluetooth range 15 m / 49 ft