Ork Hunter NIGHT B-1 Night Vision Binoculars User Manual

NIGHT B-1 Night Vision Binoculars
User Manual

User manual
NIGHT B-1 v1.0

Product Overview

1. Lens focus wheel.
2. IR LED.
3. USB port/Charging Indicator/Reset Port/Memory Card Slot Cover.
4. Mode Button.
5. Strap Hole.
6. Eyepiece/Display.
7. Shot/OK button.
8. Power Button.
9. IR Down/Zoom Out/Down Button.
10. IR Up/Zoom In/Up Button.
11. Menu Button.
12. Tripod fixing screw.

Specification

• Photo Resolution: 36M, 12M, 8M, 5M, 3M, 2M, 1M.
• Video Resolution: 4K, FHD, HD.
• Lens: F1.2 large aperture, F=25mm, automatic infrared filter.
• Lens angle: FOV=10°, diameter 24mm.
• Display: 3.2” 480*854 HD TFT, 7 levels of brightness adjustment.
• Memory card: up to 32GB.
• USB port: TYPE-C.
• Auto Power Off: Off/1min/3min/5min/10min.
• Infrared light: 3W, 850nm strong infrared spotlight, 7 levels of infrared adjustment.
• Viewing distance in complete darkness: about 250-300 meters.
• Low-light sight distance: 3 meters to infinity.
• Digital zoom: 8x digital zoom.
• Color effects: color, black and white, luminous green, infrared light.
• Power supply: 2600mAh lithium battery.
• Date Stamp: supports setting date and time. Date and time stamp on photo and video files.
• Operation buttons: 6 buttons.
• Operating temperature: -20° C to +50° C.
• Storage temperature: -30° C to +60° C.
• Size and weight: 14512055mm / 336 g.

About Charge
The device has a built-in rechargeable battery, please fully charge it before first use.
Please use a universal USB power adapter (DC 5V/2A) (not included) to charge this device. When charging, the charging indicator on the left side of the TYPE-C USB port will turn red; when fully charged, the charging indicator will turn off. If the device is completely out of power, it can be fully charged in about 4 hours.

Inserting Memory Card

• Please prepare a Class 10 Micro SD card (up to 32GB) in advance.
• Open the card slot cover (3); you will see the card slot.
• Insert the Micro SD card into the slot. Make sure the direction is right. Never insert the card forcibly.
• Format the Micro SD card; this can improve the compatibility of Micro SD card.
• To remove the card from the memory card slot of the device, press the edge of the memory card gently, the card will pop out. Then remove the card.

Note:
If the Micro SD card is not inserted correctly, after power on device will prompt “NO CARD” and the icon of the card with X will be displayed in the lower right corner. The number of pictures that can be taken or the recording time at the top right will be displayed as 0.

Basic operations

Turn On And Turn Off
Press the Power button (8) for 3 seconds to turn on the device. Press the Power button for 3 seconds again to turn off the device.
New and Special Color Effects
Luminous Green Color Effect & Film Color Effect: these 2 color effects are available in both normal mode and infrared night vision mode.
Steps: Long press Menu (11) > Luminous Green Color Effect, Long press Menu > Infrared light Color Effect, Long press Menu > Get back to the normal color mode.

Adjust the display
After turn on the device, please press the Menu button to enter the menu. When you viewing the eyepiece/display screen if the Menu font is not clear enough, please adjust the eyepiece diopter adjustment wheel until the Menu font looks clear, press the Menu button again to exit the Menu. Then adjust the focus wheel to focus according to the actual distance of the viewed scene until the screen is the clearest. If the light is insufficient or using at night, please press the IR  Up/Zoom in/Up Button (10) to turn on the infrared light and please select the IR gear according to the light at that time. The darker is the light, the higher is the gear adjustment. Long press the IR Up/Zoom In/Up Button to zoom.

Changing The Modes
The night version has 3 different modes: photo mode, video mode and playback mode. Press the Mode button (4) to change mode.

• Photo Mode: for taking still photos.
• Video Mode: for recording video.
• Playback Mode: for playing the recorded files.

Taking pictures

1. Camera mode.
2. Night vision sensitivity.
3. Photo resolution.
4. Number of pictures that can be taken.
5. Battery status.
6. Micro SD card prompt.
7. Digital zoom indication.
8. Shooting time stamp.
9. Display brightness.
10. Infrared light gear.

Turn on the device, the default is Video mode. Please press the Mode button (4) to switch to Camera mode.
Zooming:
Keep pressing the Zoom Out (9) or Zoom In (10) button to zoom in or zoom out the image. The value of magnification level appears on the LCD screen.
To take a still photo:

• View your subject via the LCD screen.

•  Adjust the focus by turning the focus wheel.

• For night or insufficient light use, turn on the IR by pressing the IR Up/Zoom in/Up Button. Increase the brightness by pressing the button repeatedly.
  It has 7 levels of brightness. The brightness can be adjusted according to your needs. The darker the light, the higher the gear adjustment.

• Press the Shot/OK button (7) to take a photo.

1. Video mode.
2. Night vision sensitivity.
3. Video resolution.
4. Recording switch indication.
5. Available video recording time.
6. Battery status.
7. Micro SD card prompt.
8. Digital zoom indication.
9. Shooting time stamp.
10. Display brightness.
11. Infrared light gear.

Turn on the device. The default is Video mode. If not, press the Mode button to switch to Video mode.
Zooming:
Keep pressing the Zoom Out or Zoom In button to zoom in or zoom out the image. The value of magnification level appears on the LCD screen.
To start to record video:

• View your subject via the LCD screen.
• Adjust the focus by turning the focus wheel.
• For night or insufficient light turn on the IR by pressing the IR button. Increase the brightness by pressing the button repeatedly. It has 7 levels of brightness. The brightness can be adjusted according to your needs.
• Press the Shot button to start to record. The record duration will be shown on the LCD screen.

To finish recording:
Press the Shot button again to stop recording.
The device will stop recording automatically once capacity of the memory card is full.

Device Power Off

• If the device is fully charged and cannot be turned on or the screen cannot move during use and cannot be turned off, please insert a small hard strip such as toothpick or wire into the RST hole, when you feel the resistance, press it and then turn it on.
• Please use an universal USB power adapter (DC 5V/2A) (not included) to charge this device. After the TYPE-C USB is connected to the device, when the red light of the charging indicator of the device is on, long press the power  button to turn on the device, unplug the TYPE-C USB to turn off the device, which means that the built-in battery has no power and it needs to be fully charged.

Poor Image

• If at day, make sure the IR is off (if IR is on, screen is black and white or the screen is colored).
• If at night, make sure you have turned on the IR, press IR up (if IR is on, screen is black and white). Adjust the most appropriate brightness according to your need.
• Adjust the focus by slowing turning the Focus wheel (1), make sure it is focused.

IR-LED (Night vision function)

• Users can manually focus the focus wheel according to the actual observation distance to debug the best focus until the display is clear.
• In photo/video mode, if you have to view the darkness environment, please short press IR Up button to activate the IR LED, the image will change to black and white. The IR LED have seven levels, short press IR Up button to up the level, short press IR Down button to down the level.
• If the battery voltage is not enough, the IR LED level will down automatically. IR level can up to 7 levels when the battery power is full. If only left half power, the level just can up to 5. If only left 25% power, the level just can up to 3.  If the battery power is lower than 25%, IR LED cannot be activated.

Settings in Photo and Video Mode
Press Menu button in photo or video mode to change the settings.

Options: 36M, 12M,8M, 5M, 3M, 2M, 1M.
Night vision sensitivity| Choose the night vision sensitivity. Options: Low / Middle / High.
Screen Brightness| Adjust the screen brightness as required.
Options: Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7.
Audio| On / Off.
Date Tag| On / Off.
Date Setting| Set the date and time of device. Press the Up or Down button to adjust the date or time, press the OK button to complete settings.
Auto Power-Off| Set the time to shut down the device for power saving if the device is idle. Options: OFF / 1 min / 3 min / 5 min / 10 min.
Language Setting| Set OSD (on-screen) language. Options: English
---|---
Flicker| Set the light source frequency to match frequency of electricity supply in local region to prevent interference.

Options: 50Hz/60Hz.

Format| Format your Micro SD card. Format Micro SD will delete all files including the protected files. Please copy the important files before confirm.
Options: OK / Cancel.
Reset System| Restore the setup to factory default settings.
Options: OK / Cancel.
Version| User can see the firmware version information.

Playback

1. Turn on the device, press the Mode button to switch to playback mode.

2. Press Up/Down button to view photos and video files.

3. Playback the video:
   • Press the Shot button to start playing the video files.
   • Press the Shot button again to have a pause.
   • Press Menu button to stop the current video playing.

4. Press Menu button in playback mode, the screen will display the playback menu. Press Up/Down button to scan lock or delete. Press Shot button to select one to enter the sub-menu.

Playback menu list:

Download files to PC
There are two ways to download files from the device to a computer:

• By inserting the memory card into a card reader.
• By connecting the device to a computer using the supplied TYPE-C USB cable.

Using a Card Reader

1. Eject the memory card from the device and insert it into a card reader. Then connect the card reader to a computer.
2. Open “My Computer” or “Windows Explorer” and double-click the removable disk icon that represents the memory card.
3. Copy images from the card into a directory of your choice on the computer’s hard disk.

Connecting the Device to a PC via the USB Cable

1. Turn on the night vision. Connect it to a computer through the supplied TYPE-C USB cable.
2. Select the “Memory” on the screen and press the OK button to enter the removable disk mode.
3. Open “My Computer” or “Windows Explorer”. A “Removable Disk” appears in the drive list. Double-click the “Removable Disk” icon to view its contents. Files stored on the camera are located in the folder named “DCIM”.
4. Copy the photos or files to your computer.

Notes on Cleaning
Before cleaning the device, disconnect it from the power supply! Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid. Clean the eyepieces and/or lenses only with a soft,  lint-free cloth, (e.g. microfiber cloth). To avoid scratching the lenses, use only gentle pressure with the cleaning cloth. Protect the device from dust and moisture. Store it in a bag or box.

Czech Republic
www.partizantactical.cz
Ukraine
www.partizanstore.ua

References

• Partizan Store Ukraine

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>