ople appliances S2 Fresnel Optical Screen User Manual
- June 12, 2024
- ople appliances
Table of Contents
S2 Fresnel Optical Screen
User Manual
S2 Fresnel Optical Screen
NOTICE
Before using the product, please read the product instruction manual carefully
and keep it properly. The Company is not liable for any accident resulting
from the violation of the warnings in this manual.
After receiving the goods, please keep the product packing box properly, ready
for after-sale reuse!
WARNING
When installing this product, please confirm the bitmap and video. Please
follow the instructions. Otherwise, it may cause serious damage to the
product;
This product is not recommended to install on: 3D wallpaper, wall cloth,
diatom mud, brick wall and other wall with a powdery surface or with a
laminate surface. Otherwise, the product may fall off;
This product is not recommended to install in wet, watery or humid
environment. Otherwise, it may cause the product to fall or seriously reduce
the service life of the product;
During the installation and handling of this product, two people shall operate
in strict accordance with the methods in the installation video. Otherwise, it
may cause damage the product;
The frame of this product is 3D printed, and neutral detergent is required for
screen cleaning and maintenance. Otherwise, it may cause the screen frame to
fall off.
INSTRUCTION
Cutting edge Fresnel screen, specially designed for home cinema
A sharper picture and incredible visuals for a more immersive viewing
experience
Drilling-free magnetic sticker, easy installation without drilling;
Polymer resin materials, environmental protection and safety, care for the
health of you and your family;
| Screen Size | 2224*1255 |
|---|---|
| View Size (mm) | 2214*1245 |
| Gain | 2.5 |
| Resolution | support 2K/4K image |
| Ambient Light Rejection Value | ≥85% |
| Weight | 7kg |
| --- | --- |
| Install Position | The bottom edge of the screen is 630mm away from the floor |
| Suitability | UST projector (Ultra Short Throw Home Projector) |
Throw Ratio: 0.23 – 0.26
PACKAGING LIST
The label in this instruction manual is only a schematic diagram, please refer to the physical object, after opening the packaging, please carefully check the physical number of accessories in the product list;
| UNIT| QUANTITY| 100″
---|---|---|---
1| SCREEN| 1|
2| MAGNETIC STICKERS| MAGNETIC STICKERS*8 (FOR 100″ SCREEN)|
3| ELBOW JOINTS| 2|
4| SLING| 1|
5| PENDANT STICKER| 2|
6| GLOVES| 2| /
7| NON-WOVEN CLOTH| 1| /
8| MANUAL| 1| /
ENVIRONMENTAL PROTECTION STATEMENT
This product meets the environmental protection requirements of the
Administrative Measures for the Restricted Use of Hazardous Substances in
Electrical and Electronic Products:
In the process of use, there will be no harmful substances leakage,
precipitation and other problems affecting the health of consumers, you can
rest assured to use.
When the life of the product is ended or the product is no longer needed,
please comply with the relevant national laws and regulations on waste
electrical and electronic products recycling, and give them to the local
manufacturer with national recognized recycling qualification for recycling,
and shall not handle them at will.
TOXIC AND HARMFUL SUBSTANCES OR ELEMENTS
| MERCURY (HG)| LEAD (PB)| CADMIUM (CD)| HEXAVALENT CHROMIUM (CR(VI))|
POLYBROMINATED BIPHENYL (PBB)| PBDE
SCREEN| | | | | |
ACCESSORY| | | | | |
This form is prepared according to sJ/11364
o:It means that the content of the substance in all homogeneous materials of
the component is below the specified limit requirements of GB / T26572
Limited Requirements for Restricted Substances in Electronic and Electrical
Products.
x: It means that the content of toxic and harmful substances in at least one
of the homogeneous materials of the component exceeds the limit requirements
stipulated in GB / T26572 Limit Requirements for Restricted Substances in
Electronic and Electrical Products.
INSTALLATION
- Check the material and space suitability of the wall for installation
- Determine the centre line, then move horizontally (1107mm to both right and left); paste the sling and pendant (100 inch screen display width)
- Mark A1 and A2 at 635mm above the ground; mark A3 and A4 at 1245mm above A1 and A2 (100 inch screen display four points locations)
- Switch on the projector, adjust the projection to ensure perfect match with the screen size
- Secure the 8 pieces of magnetic stickers at the marked area
- Remove the pendants and use it as the indicators for corners of the screen
- Install the screen and ensure that the edges closely align with the pendants
- Check the projection and ensure that the image matches the screen and function normally
- Remove the pendants and the installation is completed
Please note: the wall surface is required to be highly even and levelled
- For painted wall: uneven surface needs to be less than 1.5mm
- For other hard surfaced wall: uneven surface needs to be less than 0.5mm
AFTER-SALES SERVICE PROCEDURE
-
Contact the manufacturer
Check the appearance immediately after receiving the product. If there is any problem, the client needs to keep the packaging and contact the manufacturer. Please contact the manufacturer with the following information:
• Client details
• Product information including model description, serial number [product serial number printed at the back of the product and outside the packaging box should be consistent] • Describe the issue to the customer service department
• Customer service staff may require future explanations about the issues and require photos as proof
• Contact email: info@winways.com.au -
Response from the manufacturer
1. Once the manufacturer received the inquiry from the client, verification on products will be done
2. If the client provides clear photos as proof, the manufacturer will be able to resolve the issue immediately without further investigation
3. If the proof are unclear or problems are complicated, the manufacturer may require the client to return the product back to the manufacturer in order to assess on the issue
4. Customer service staffs will inform the client regarding returning shipments and logistics -
Negotiation and resolution
Based on the assessment and evaluation, customer service staffs will negotiate with the client about the resolution procedures depending on the attribution of responsibility.
The following scenarios are not covered under the warranty:
• Product with no serial number or the product serial number does not match the product model, or the serial number has altered marks
• Damage caused by human factors, including damage due to improper handling of the product or improper usage that did not follow the instruction in normal working environment
• Damages due to improper disassemble, repair, refit or any action carried out by users without professional guidance
• Using products under harsh environment or conditions such as ambient temperature, high humidity etc.
• Products damaged by uncontrollable factors such as fire, flood, lightning strikes, traffic accidents etc.
• Products purchased through informal channels such as second-hand products
• Demos or on-sale products sold by the company, or products indicated ‘no after-sales service’, ‘only provide maintenance’ and ‘no return or exchange’.
Product use and maintenance instructions:
• This product does not require electricity
• The main material of the product is polymer resin. The screen surface will be marked with sharp objects and cannot be repaired
• General cleaning method: gentle mopping using a soft cloth with a small amount of neutral detergent
• Do not use in high temperature and high humidity environment. The appropriate conditions are indoor with temperature of 25°C ± 10°C, humidity of 50 ± 20% RH
• For the best outcome, please avoid outdoor use (sun exposure and rain will cause deformation or product damage, which cannot be repaired)
DISCLAIMER
Windways Au Pty Ltd (Windways) does not make any express or implied
representation or guarantee about the contents of this user manual.
Windways reserves the right to revise this publication and make amendments to
the contents of this document at any time without giving notice to any person.
Windways Au Pty Ltd (Windways) does not make any express or implied
representation or guarantee about the contents of this user manual.
Windways reserves the right to revise this publication and make amendments to
the contents of this document at any time without giving notice to any person.
Screen model is subject to your order requirements. Screen model is subject to
your order requirements.
ALL RIGHT RESERVED
No part of this document shall be reproduced in any form, transmitted or
stored into the retrieval system or translated into any language or computer
language without prior written permission from Windways Au Pty Ltd.
Manufacturer: Windways Au Pty Ltd
Address： 114 Eldridge Rd, Condell Park NSW 2200
Email:info@winways.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>