ople appliances EP1216-SA Clothes Dryer Instruction Manual

EP1216-SA
Clothes Dryer User Manual

IMPORTANT SAFETY INSTRUCTIONS

Before using this product, please read this manual carefully and follow the notes below:

| Please check that the voltage marked on the bottom of the product is in line with the service voltage.
---|---
| Unplug the Dryer after use.
| Do not insert anything into the product.
| In order to extend its service life, please do not use it in places extremely hot, humid, with oil and dust, or in open fire.
| To avoid electric shock or fire accidents, it is not allowed to use the Dryer in places where gasoline, paint, acid-base oil and other flammable and explosive materials  re stored and  places drenched with water.
| Do not use it in places with obstacles or irregularities
| Cut off the power supply when moving or cleaning the product.
| Do not use the product outdoors.
| Neither immerse the equipment or power cord in water, nor let anything damp get near them.
| Disassemble without authorization is not allowed. In case of failure, please send it to the local after-sales for maintenance.
| If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
| – This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
– Children should be supervised to ensure that they do not play with the appliance.
– Cleaning and maintenance of the appliance should not be done by children alone without supervision.
– When it is not used or disassembled, disconnect the power of the appliance before cleaning, and children are not allowed to use it without supervision.

Warning:
The appliance is intended only for drying textiles washed in water.
SAVE THIS MANUAL

KNOW YOUR PRODUCT

The Company reserves the right to change the design of the product. The product you purchased may have been improved without further notice and is not completely consistent with the manual, in kind prevail. However, it will not change its performance and usage, so rest assured to use.

Control Panel

Product Information

PRODUCT FEATURES

1. Easy to be stored and carried for its storage box structure.
2. Controlled by two touch buttons only.
3. Six-interval timing function ranging from 30 mins to 180 mins and a long time power on.
4. Four Telescopic Rods with reliable support.

PRE-OPERATION INSTRUCTIONS

1. Unpack and take out the product carefully.
2. Select a hard and flat horizontal surface, which shall not hinder the air inlet or outlet.
3. Press the Top Cover Buckle on both sides of the Top Cover to disconnect the Top Cover, and then take out the Cloth Cover, Support, Telescopic Rod and Stand in the box. (Figure 1)
4. Install the four stands into the buckles at the bottom of the box.(Figure 2)
5. Pull the Telescopic Rods apart and insert them into the round holes at the four corners of the box. (Figure 3)
6. Slide the Support onto the four Telescopic Rods. (Figure 4)
7. Slide in the Cloth Cover. Note that the Cloth Cover needs to be slide into the bottom buckle(Figure 5)
8. Close the Top Cover. (Figure 6)
9. Hang the clothes to be dried on the Support. (Figure 7)

Please be sure to carry out the above pre-operation before using the clothes dryer.

INSTRUCTIONS FOR USE

1. Power on to standby mode and the display flashes. (Figure 8)

2. Adjust the drying time according to the references by touching the Timing Button. Each touch will increase the time by 30 minutes. When “ON” is displayed, it means a long-time power on. (30-60-90-120-150- 180-ON) (Figure 9)

3. Touch the ON/OFF Button to start the clothes dryer. (Figure 10)
   Note: If you do not press ON/OFF Button to start after the selected time for about 5 seconds, the clothes dryer will automatically start to work.

4. Working status: when the clothes dryer is working, the displayed number will decrease with time. After the work is completed, three beeps will sound and the display will flash. At this time, the fan in the clothes dryer will continue to rotate for about 1  minute  to dissipate heat, and then the clothes dryer will automatically shut down. (Figure 11)

Note:
The working time can be adjusted during the operation based on the user’s actual needs by touching the Timing Button.
Please turn off the power and wait for the product to cool off before storage.

Storage Instructions

1. Remove the Top Cover, Cloth Cover, Support, Telescopic Rods and Stands in this order. (Figure 12)
2. Retract the power cord and install it onto the buckle. (Figure 13)
3. Place the Stands inside the box as shown in the figure. (Figure 14)
4. Retract the Telescopic Rods, lock the buckles, and place them inside the box as shown in the figure. Pay attention to the direction of the buckles. (Figure 15)
5. Stack the Cloth Cover neatly and place it inside as shown in the figure. (Figure 16)
6. Fasten the Support as shown in the figure. (Figure 17)
7. Check and make sure all the accessories have been placed inside, and then fasten the Top Cover. (Figure 18)

CLEANING AND MAINTENANCE

Please cut off the power and wait for the product to cool off before cleaning and maintenance.

1. Normally, disconnect the power before cleaning.
2. Neither immerse the equipment in water, nor let anything damp get near them.
3. To keep it dust-free, please wrap the product and put it back in the package if the product is to be spared for a long time.
4. Use a rag to wipe the outer surface of the clothing processor and refrain from using toxic, frosted or chemical cleaners.

REFERENCES FOR DRYING TIME

Note:
All the above clothes need to be dried on the basis of washing machine spinning, otherwise the drying time will be different. The drying time may vary due to uncertain factors such as fabric thickness/clothing size, so please refer to the actual situation.

COMPOSITION AND CONTENT OF TOXIC AND HARMFUL SUBSTANCES

In order to be in line with the Administrative Measures the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Products, the names of electrical product parts and the information of harmful substances that may be contained are provided as follows.
Clothes Dryer

(PBDE)
Thermostat| X| 0| X| 0| 0| 0
Diode| X| 0| 0| 0| 0| 0
Metal in buzzer| X| 0| 0| 0| 0| 0
Panel as-control| X| 0| 0| 0| 0| 0
Power board assembly| X| 0| 0| 0| 0| 0

indicates that the content of the hazardous substance in all homogeneous materials of the part is within the limit specified in GB/T 26572-2011. indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit specified in GB/T 26572-2011 due to the restrictions of existing technologies and processes. In the above table, parts marked with meet EU ROHS 2.0 – Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Environment Friendly Use Period
Note:
All electrical and electronic products sold in China must be marked with the label of Environment Friendly Use Period (EFUP). The label of EFUP indicates the use period under normal service conditions, temperature and humidity, excluding consumables such as batteries.
WARRANTY POLICY OF REPAIR, REPLACEMENT AND REFUND FOR ELECTRICAL PRODUCTS
To ensure our consumers have the best after-sales service, the Company implements warranty services of repair, replacement and refund evidenced by this warranty card, the invoice or any other valid purchase certificate in accordance with the relevant provisions of the Consumer Protection Law. The whole machine is guaranteed for one year from the date (subject to the valid sales certificate/invoice) when the product is directly sold to consumers. Instead of warranty services of repair, replacement and refund, a charged maintenance service shall apply in the following circumstances;

1. Damage due to consumers’ improper use, maintenance and storage.
2. Damage due to improper repair in a place other than a maintenance center designated or authorized by the Company.
3. Damage due to non-family use such as commercial or social group purpose.
4. Damage caused by force majeure.

Online consumers’ warranty is exempted from invoices.
They can enjoy the service with this warranty card and the purchase time which can be verifiable through the backstage, or the shopping dialogue as the proof.
Note:
When you require or are receiving maintenance service, should you have any questions, please call the Company’s Service Hotline.
Distinguished User:
Greetings! Thank you for your trust and support of our products. The warranty card is attached to each product.
Please keep it in a safe place. Complete the following detailed information in case of warranty. The warranty card is issued once only.

WARRANTY CARD

User Name—————————–
Tel:———————————–
Date of Purchase:—————–
Name of Store:———————-
PO Number:—————————
Buyer’s ID:————-
Mail Address & Zip:————————-
Cause of Failure:—————————————
In case you have any repair requirements, questions, suggestions or complaints about our products or services, please call our Service Hotline: +61 03 7016 7996 +61 406 198 737
E-mail:  Support@hoperlayer.com.au
FRANK AND ANDY TRADING PTY LTD Address：
Unit 1/30 Edwards Street，Burwood VIC 3125

FRANK AND ANDY TRADING PTY LTD
www.hoperlayer.com.au
Unit 1/30 Edwards Street，Burwood VIC 3125
EESS-E8151
+61 03 7016 7996 +61 406 198 737
Support@hoperlayer.com.au
Qualified Certificate
The product has been inspected according to the standards and is approved for delivery.
Inspected by:
Ex-factory Date:
WWW.DONLIM.COM

Documents / Resources

| ople appliances EP1216-SA Clothes Dryer [pdf] Instruction Manual
EP1216-SA Clothes Dryer, EP1216-SA, Clothes Dryer, Dryer
---|---

References

• hoperlayer.com.au

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>