Viessmann 5084 H0 DB Automatic Ticket Machine with LED Lighting Instruction Manual
- June 12, 2024
- VIESSMANN
Table of Contents
Viessmann 5084 H0 DB Automatic Ticket Machine with LED Lighting
Product Information
-
Product Name: H0 DB Fahrkartenautomat mit LED-Beleuchtung (H0 DB Ticket machine with LED lighting)
-
Model Type: Model building item, not a toy
-
Manufacturer: Viessmann
-
Usage: For installation in model train layouts and dioramas.
For connection to an authorized model train transformer. For operation in dry rooms only. -
Technical Data:
- Operating voltage: with or without item 5215, power module
- Operating current: ca. 10 mA
-
Warranty: 2 years from the date of purchase
Product Usage Instructions
Important Information:
- Please read the manual carefully before using the product for the first time and keep it for future reference.
- This product is not a toy and is not suitable for children under the age of 14 years.
Please read this manual completely and attentively before using the product for the first time. Keep this manual. It is part of the product.
Safety Instructions
- Risk of injury! Tools are required for installation.
- Electrical hazard! Never put the connecting wires into a power socket!
- Regularly examine the transformer for damage. In case of any damage, do not use the transformer.
- Make sure that the power supply is switched off when you mount the device and connect the cables!
- Only use VDE/EN tested special model train transformers for the power supply!
- The power sources must be protected to avoid the risk of burning cables.
Caution:
Risk of injury!
Tools are required for installation.
Electrical hazard!
Never put the connecting wires into a power socket! Regularly examine the
transformer for damage. In case of any damage, do not use the transformer.
Make sure that the power supply is switched off when you mount the device and
connect the cables!
Only use VDE/EN tested special model train transformers for the power supply!
The power sources must be protected to avoid the risk of burning cables.
Using the product for its correct purpose
This product is intended:
- For installation in model train layouts and dioramas.
- For connection to an authorized model train transformer (e. g. item 5200).
- For operation in dry rooms only.
Using the product for any other purpose is not approved and is considered inappropriate. The manufacturer is not responsible for any damage resulting from the improper use of this product.
Checking the Package Contents:
- Check the contents of the package for completeness:
- H0 DB Ticket machine with LED lighting
- Manual.
Introduction
This LED model uses SMD LEDs to produce light matching the lamp model. Low
heat build-up and power input. Nearly unlimited lifetime of the LEDs, so no
more change is required.
Mounting:
- Mount the product in the desired location using a little adhesive.
- Remove the LED model carefully from the package.
- Check function before mounting.
- Drill a hole (Ø 2 mm) at the mounting place .
- Slide the connection cables through the hole.
- Put the machine at the desired spot and, if desired, fix it in place with a little adhesive.
Connection
- Connect the diode (red component with black marking) to the plus pole of the power supply and the resistor to the minus pole.
Caution:
Resistor and diode at the cables are needed for proper function of the LED
model. Never cut them off! Never cover resistor or diode with insulation
material, because they have to be cooled by surrounding air!
While connecting the cables, leave a loop of about 2 – 3 cm length below the
LED model, so that you can pull and reverse the LED model from the mounting
place during any work.
Connect the LED model to the lighting power output of a model train
transformer (e. g. item 5200) or power supply as shown in fig. 2 and/or
3.
DC voltage: Connect the
diode (red part with black mark) with the plus pole of the power supply, the
resistor with the mi-nus pole.
AC voltage: Operation with AC voltage could cause some flickering. We
recommend to use the Viessmann power module, item 5215, which is sufficient
for ca. 100 LED lamps or reflectors .
HINT: Power module with distribution strip, item 5205
- Offers flicker-free lighting when using AC power.
- Nearly double brightness is possible.
Connect the cable to the diode with the brown output socket, the resistor with the red output socket of the power module.
Warranty
- The warranty period is 2 years from the date of purchase.
- Contact the manufacturer’s service center in case of any faults during the warranty period.
Each model is tested to its full functionality prior to delivery. The warranty period is 2 years starting from the date of purchase. Should a fault occur during this period please contact our service department (service@viessmann- modell.com. Please send the item to the Viessmann service department for checking and repair only after consultation. If we find a material or production fault to be the cause of the failure the item will be repaired free of charge or replaced. Expressively excluded from any warranty claims and liability are damages of the item and consequential damages due to inappropriate handling, disregarding the instructions of this manual, inappropriate use of the model, unauthorized disassembling, construction modifications and use of force, overheating and similar.
Note: The manufacturer is not responsible for any damage resulting from the improper use of this product
Technical data
Operating voltage: 10 – 16 V AC ~
(with or without item 5215, power module) 14 – 24 V DC = 13 – 24 V digital
signal
Operating current: ca. 10 mA
Subject to change without prior notice. No liability for mistakes and printing
errors. You will find the latest version of the manual on the Viessmann
website using the item number.
Do not dispose of this product through (unsorted) domestic waste, supply it to
recycling instead.
Viessmann Modelltechnik GmbH
Bahnhofstraße 2a
D – 351 16 Hatzfeld-Reddighausen
info@viessmann-modell.com
+49 6452 9340-0
www.viessmann-modell.de
Made in Europe
Documents / Resources
|
Viessmann 5084 H0 DB Automatic Ticket Machine with LED
Lighting
[pdf] Instruction Manual
5084 H0 DB Automatic Ticket Machine with LED Lighting, 5084, H0 DB Automatic
Ticket Machine with LED Lighting, Machine with LED Lighting, LED Lighting,
Lighting
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>