EZPole Heavy Duty Hitch Mount Flagpole Kit Instructions
- June 12, 2024
- EZPOLE
Table of Contents
EZPole Heavy Duty Hitch Mount Flagpole Kit Instructions
Product Overview
Flagpole Kit Includes
- l 2”x 72” Polished Aluminum Flagpole – 16 Gauge
- l 2” Hitch Mount Flagpole Holder – Fits 2” Hitch Receiver
- l 3” Aluminum Silver Ball
- l 2” Top Cap installed on Flagpole
- l 3’ x 5’ Nylon Sewn USA Flag (*Note not all vendors add flag)
- l 1 – 2” Swivel Sleeve
- l Clip Pack: 2 stainless steel clips, top swivel and washer
- l 5/8” Trailer Hitch Pin
- l Safety Coupler Pin
- l Thumb Screw
STEP 1: Insert your Hitch Mount Flagpole holder into your vehicles hitch
receiver and secure it with your 5/8” pin.
STEP 2: Assemble your flagpole. Slide your 2” swivel sleeve over the top
of your flagpole then place the top swivel and washer on top of the Top Cap
and screw in your aluminum ball.
STEP 3: Add your flag to your flagpole. Clip the top of your flag to the
Top Swivel & the bottom of your flag will clip to the first loop on your 2”
Swivel Sleeve.
STEP 4: Push in the button located on the flagpole and slide your 2”
Swivel Sleeve past the button. This will prevent your flag from rising to the
top of the pole.
STEP 5: Insert your flagpole into your flagpole holder.
STEP 6: Insert your Safety Coupler Pin to secure your flagpole.
STEP 7: Tighten your Thumb Screw
STEP 8: Enjoy!
FOR PARTS AND SERVICE:
EZPOLE FLAGPOLES/ 1489 EAST 363RD STREET/ EASTLAKE, OHIO 44095
TOLL FREE: 888-454-9164/
LOCAL: 440-951-1011/ FAX:
440-951-2933/
www.ezpole.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>