SOLUM CM01WTA11M Bluetooth WiFi Combo Module User Manual

June 12, 2024
SOLUM

SOLUM CM01WTA11M Bluetooth WiFi Combo Module

General Description

CM01WTA01M (BLE/WiFi Combo module) is a communication module with built-in 802.11 Wi-Fi and Bluetooth functions for digital device applications, and integrates an 802.11n wireless LAN network controller on a single chip based on the Realtek RTL8720CM solution, supporting 2.4GHz WLAN IEEE 802.11 b/g/n MAC/Baseband/Radio and Bluetooth wireless communication functions. In order to exchange operation status and control signals between devices of home appliances products in a wireless communication method, a wireless communication module supporting a short-range digital communication method of a wireless communication method is used.

Application

  • Home appliances
    Rice cooker, Induction range, IoT sensor, etc.

Features

  • WiFi 802.11 b/g/n 1X1, 2.4GHz
  • Bluetooth Low Energy(BLE) 4.2
  • Serial peripheral interface (master and slave modes)
  • Compact dimension: 3 5 mm x 2 0 mm / H max: 4. 8 mm
  • Host Interfaces: UART Interface
  • RoHS compliant

PictureSOLUM-CM01WTA11M-Bluetooth-WiFi-Combo-Module-
\(2\)

Dimension, Pin Assignments, Pictures

Dimension

  • L X W X H = 20.0 x 35.0 x 4.8mmSOLUM-CM01WTA11M-Bluetooth-WiFi-Combo-Module- \(3\)
Parameter Condition s Min. Nom. Max. Unit

Dimension (Module)
X| –| 19.7| 20| 20.3| mm
Y| –| 29.7| 35| 35.3| mm
Height| –| –| 4.8| –| mm

Pin Assignments

SOLUM-CM01WTA11M-Bluetooth-WiFi-Combo-Module- \(4\)

No. Pin Name Description Type
9 UART1_TX UART Interface TX O
10 UART1_RX UART Interface RX I
5 UART2_TX UART Debug TX O
6 UART2_RX UART Debug RX I
17 VIN_3V3 +3.3V Power supply(2.97V ~3.63V) P

Application design guide

SOLUM-CM01WTA11M-Bluetooth-WiFi-Combo-Module- \(5\)

Electrical Characteristics

Absolute Maximum Ratings

Symbol Parameter Min. Norm. Max. Unit
VIN DC supply voltage 2.97 3.3 3.63 V

Power Consumption

  • WiFi mode
    Parameter| Conditions| Min.| Nom.| Max.| Unit
    ---|---|---|---|---|---
    802.11b(2.4GHz)| 18dBm Tx Power|  |  | 250| ****

mA

---|---|---|---|---|---
802.11g(2.4GHz)| 15dBm Tx Power|  |  | 213
802.11n(2.4GHz)_20MHz| 14dBm TX Power|  |  | 205
802.11b(2.4GHz)| 20dBm Tx Power|  |  | 288| ****

mA

802.11g(2.4GHz)| 17dBm Tx Power|  |  | 234
802.11n(2.4GHz)_20MHz| 16dBm TX Power|  |  | 222

  • WiFi Rx mode (Max. current)
    802.11b(2.4GHz)| -60dBm Input Power|  |  | 50| ****

mA

---|---|---|---|---|---
802.11n(2.4GHz)_20MHz| -60dBm Input Power|  |  | 53

  • WiFi mode (Max. current)
    All Standby| WiFi mode|  |  | 33| ****

mA

---|---|---|---|---|---
All Off| WiFi mode|  |  | 23
Idle| WiFi mode|  |  | 51

  • Bluetooth mode
    Parameter| Conditions| Min.| Nom.| Max.| Unit
    ---|---|---|---|---|---
    BT Tx| BT MP, 4.5dBm Tx Power|  |  | 131| mA
    ---|---|---|---|---|---
    BT Rx| BLE Central mode|  |  | 60|
    BT ADV| BT Peripheral mode|  |  | 61|
    BT Connection| BT Central mode|  |  | 61|

Recommended Operating Conditions

Symbol| Parameter| Conditions| Min.| Nom

.

| Max.| Unit
---|---|---|---|---|---|---
VIN| DC supply voltage from HOST| –| +2.97| +3.3| +3.63| V
Top| Operating temperature(Ambient)| –| -20| | +85| °C

Environmental Characteristics

Symbol Parameter Conditions Min. Max. Unit
ESD Electro-static discharge voltage HBM -4K +4K V
Top Operating temperature -20 +85 °C
Tstg Storage temperature -30 +85 °C

RF Specifications

All measurements are made under nominal supply voltage, room temperature, and conducted conditions at each antenna port except antenna.

WLAN Receiver RF Specifications

Parameter Conditions Min. Nom. Max. Unit

Receive input frequency (based on center frequency of channel)
802.11b/g/n| 2.4GHz| 2412| –| 2472| MHz
WLAN 2.4GHz Receiver sensitivity
802.11b| 1Mbps DSSS| PER<8%,

Packet size= 1,024bytes

| –| -99.0| –| dBm
2Mbps DSSS| –| -95.5| –| dBm
5.5Mbps DSSS| –| -93.5| –| dBm
11Mbps DSSS| –| -90.0| –| dBm
802.11g| 6Mbps OFDM| PER<10%,

Packet size= 1,024bytes

| –| -94.0| –| dBm
9Mbps OFDM| –| -93.0| –| dBm
12Mbps OFDM| –| -91.5| –| dBm
18Mbps OFDM| –| -89.0| –| dBm
24Mbps OFDM| –| -86.0| –| dBm
36Mbps OFDM| –| -82.5| –| dBm
48Mbps OFDM| –| -78.0| –| dBm
54Mbps OFDM| –| -76.5| –| dBm
802.11n (HT20)| MCS0| PER<10%,

Packet size= 1,024bytes

| | -93.5| | dBm
MCS1| | -91.0| | dBm
MCS2| | -88.5| | dBm
MCS3| | -85.5| | dBm
MCS4| | -82.5| | dBm
MCS5| | -77.0| | dBm
MCS6| | -75.5| | dBm
MCS7| | -74.0| | dBm
Maximum input level

802.11b| PER<8%| –| –| 0| dBm
802.11g/n(2.4GHz)| PER<10%| –| –| 0| dBm

WLAN Transmitter RF Specifications

Parameter Conditions Min Nom Max Unit

Transmit output frequency (Center frequency of channel)
802.11b/g/n| 2.4GHz| 2412| –| 2472| MHz
WLAN 2.4GHz **Transmit Channel Power*
802.11b (2.4GHz)| 1~11Mbps DSSS| –| 16| –| dBm
802.11g (2.4GHz)| 6Mbps OFDM| –| 14| –| dBm
54Mbps OFDM| –| 14| –| dBm
802.11n (2.4GHz) (HT20)| MCS0| –| 13| –| dBm
MCS7| –| 13| –| dBm
EVM(Error Vector Magnitude)
802.11b (2.4GHz)| 1~11Mbps DSSS| –| 8| –| %
802.11g (2.4GHz)| 6Mbps OFDM| –| -5| –| dB
54Mbps OFDM| –| -25| –| dB
802.11n (2.4GHz) (HT20)| MCS0| –| -5| –| dB
MCS7| –| -28| –| dB
Center Frequency tolerance**
802.11b| 2.4GHz| -25

(-60)

| –

| +25

(+60)

| ppm (kHz)
802.11g| 2.4GHz
802.11n| 2.4GHz
Remarks
* Transmit Channel Power : Transmit channel power is limited within EIRP limit based on country Regulation in operational mode.

** EVM :

. Method: composite EVM method.

. Number of symbols: 17.

. Phase correction: Symbol-by-symbol correction.

. Channel estimation: Raw channel estimate full packet.

. Symbol timing correction: on.

. Amplitude tracking: off.

. Frequency Sync: Long training symbol.

Bluetooth RF Specifications

Parameter Conditions Min Typ. Max Unit
Frequency Range 2402+K*2MHz (K=0~39) 2402 2480 MHz

Receiver
Sensitivity (PER)| PER ≤30.8%| –| -100| –| dBm
Max received signal| PER ≤30.8%| 0| –| –| dBm
Transmitter
Output Power| Average Power| –| 4.5| –| dBm
ICFT|  | –| -15| –| kHz
Frequency offset| Drift rate| –| 2| –| kHz/50us
Initial drift rate| –| -2| –| kHz

Manual

Interface (UART)

Serial port setup value
Baud Rate 115,200
Data bits 8bit
Parity bits
Stop bits 1bit
Flow control

Module Control (Host → module)

  • Command format: AT<+CMD><=parameter>[][CR][LF]
  • AT Command list
command description response
AT+SEND=XXXXXXX Data send to server OK[CR][LF]
AT+RESET Reset OK[CR][LF] ATSC=0 ATSC=1
AT+BROADCAST=XXXXXXXX Broadcast BLE advertisement by device name XXXXXXXX
AT+CONNECT Connect to the server
AT+OTA_PROD=XXXXXXXX Update Product FW(URL: XXXXXXXX)
AT+OTA_MOD=XXXXXXXX Update module FW(URL: XXXXXXXX)
AT+OTA_READY_OK Host is ready for OTA
AT+OTA_DONE OTA completion confirmed
AT+PRODINFO=XXXX Set product information XXXX
--- --- ---
AT+LCDSEND=XXXXXXX Set LCD type to XXXXXXX
AT+NMAC=? Get WLAN MAC OK_XXXX[CR][LF]
AT+RSSI=? Get RSSI
AT+MODULEVER=? Get MODULE version
AT+LCDVER=? Get LCD version
AT+SSID=? Get SSID
AT+PWD=? SET WLAN PASSWORD

Commend response (module → Host)

Command response description response
OK success
ERROR Commend fail
READ=XXXXXX Rx data from server OK[CR][LF]
EVENT=TCP_SERVER_CONNECT Successful sever connection OK[CR][LF]
EVENT=TCP_SERVER_FAIL Sever connection fail
EVENT=TCP_SERVER_DISCONNECT Sever disconnected
EVENT=OTA_READY OTA ready
EVENT=OTA_START OTA started
EVENT=OTA_END OTA completed
EVENT=OTA_FAIL OTA failed
   

Antenna list

Antenna selection guide

  1. Impedance: 50Ω
  2. Frequency range: 2.4GHz~2.5GHz
  3. Peak gain: 3.999dBi
  4. Example antenna
    • KDT-TE-2450TO-03D-RP (Wi-Fi Dual and 2.4GHz /5GHz) for External Tilt

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID TH E USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

IMPORTANT NOTE: FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.

A label must be affixed to the outside of the host product with the following statements:
Product Name: Wi-Fi CAT (Connected Appliance Transceiver) Module
Contains FCC ID: 2AFWN-CM01WTA11M

Module is limited to OEM installation ONLY.

  • The OEM integrator is responsible for ensuring that the end user has no manual instructions to remove or install module.
  • That module is limited to installation in mobile or fixed applications, according to Part 2.1091(b).
  • That separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations.

Revision History

SOLUM-CM01WTA11M-Bluetooth-WiFi-Combo-Module- \(1\)

Documents / Resources

| SOLUM CM01WTA11M Bluetooth WiFi Combo Module [pdf] User Manual
2AFWN-CM01WTA11M, 2AFWNCM01WTA11M, CM01WTA11M, CM01WTA11M Bluetooth WiFi Combo Module, Bluetooth WiFi Combo Module, Combo Module
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals