MAXIM LIGHTING E30182-01BK Lightray 2-Light Wall Sconce Instruction Manual
- June 12, 2024
- MAXIM LIGHTING
Table of Contents
ITEM NUMBER: E30182-01BK
DESCRIPTION : Lightray 2-Light Wall Sconce
Instruction Manual
E30182-01BK Lightray 2-Light Wall Sconce
PLEASE CONSULT ELECTRICIAN BEFORE INSTALLATION
LAMPING : 1 x 15W AC PCB
Vinput : AC 120V ~60Hz
MADE IN CHINA I HECHO EN CHINA I FABRIQUE EN CHINE
General Lighting (lncluding AC LED)
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level,spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
Switch off,unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as
itcould cause fire.
Do not plug the product inifcord is tornor frayed.
For outdoor use, caulk around fixture with silicone sealant to prevent water
intrusion.
Cleaning & Maintenance
Apply a high quality car wax to the fixture regularly to protect from
environmental factors that can damage the metal.
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner.
Periodically (every90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Before getting,started,ensure the package contains the following
components:
