hansgrohe AXOR STARCK Lever Kitchen Faucet Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
- hansgrohe AXOR STARCK Lever Kitchen Faucet
- Product Information
- Product Usage Instructions
- Installation Instructions
- Technical Data
- Symbol Description
- Dimensions
- Flow diagram
- Operation
- Spare parts
- Test certificate
- Assembly
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe AXOR STARCK Lever Kitchen Faucet
Product Information
The product is a shower system with the model numbers Starck 10800000 and Starck 10801000. It comes with instructions for use and assembly in multiple languages including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Norwegian, and Bulgarian. The shower system should only be used for bathing, hygienic and body cleansing purposes. It requires equal pressure for hot and cold water supplies. The recommended operating pressure is 1.6 MPa and the recommended hot water temperature is indicated in the instructions.
Product Usage Instructions
- When installing the shower system, it is necessary to wear gloves to prevent crushing and cutting injuries. The hot and cold water supplies must be of equal pressure. The recommended operating pressure is 1.6 MPa.
- The shower system may only be used for bathing, hygienic and body cleansing purposes. To compensate for differences in pressure between the hot and cold water connections, it is important to follow the instructions provided for installation.
- For cleaning instructions, refer to the enclosed brochure. Spare parts and test certificates can be found on pages 20 and 19 respectively. Assembly instructions are provided on page 17.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pres-sures.
Installation Instructions
The fitting must be installed, flushed and tested after the valid norms.
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
- Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa
MODEL
Symbol Description
Do not use silicone-containing acetic acid!
Dimensions
Flow diagram
Operation
Cleaning see enclosed brochure
Spare parts
Test certificate
Assembly
Hansgrohe · Postfach 1145 · D-77761 Schiltach
Telefon + 49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet : www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>