BRT Sys LDSBus EC Sensor Adapter Instructions
- June 12, 2024
- BRT Sys
Table of Contents
Before we can use this LDSBus device, it must be configured.
Let’s Get Started!
BRT Sys LDSBus EC Sensor Adapter
Step 1.
Connect the LDSBus USB Adapter to the PC with a USB-C to USB-A Cable.
(Both to be purchased separately)
Step 2.
Connect one end of the cable provided to the LDSBus device if required.
Step 3.
Connect the other end of the cable to the LDSBus USB Adapter as shown in
picture
Step 4.
Scan the QR code or visit the link provided below:
Step 5.
Download the LDSBus Configuration Utility. Complete the installation
instructions.
Follow the LDSBus Configuration Utility guide to configure the device name,
device address and termination settings.
View the full information of this LDSBus device, application setup and
installation guides for further Instructions.
Please visit or scan the QR code for warranty registration with the UUID and Product Key below
https://brtsys.com/warranty
STICKER AREA
Documents / Resources
| BRT
Sys LDSBus EC Sensor
Adapter
[pdf] Instructions
LDSBus, LDSBus EC Sensor Adapter, EC Sensor Adapter, Sensor Adapter, Adapter
---|---
| BRT
Sys LDSBus EC Sensor
Adapter
[pdf] Instruction Manual
LDSBus, LDSBus EC Sensor Adapter, EC Sensor Adapter, Sensor Adapter, Adapter