PROAIM MP-306-00 Mitchell Base to Bowl Camera Adapter Instruction Manual
- June 12, 2024
- PROAIM
Table of Contents
PROAIM MP-306-00 Mitchell Base to Bowl Camera Adapter
Product Information
The Mitchell Base to Bowl Camera Adapter with Mitchell Top Plate (MP-306-00) is a camera accessory that provides a Mitchell-mount solution for all your accessory needs. The package includes four bolts, two washers, two nuts, and the Mitchell Top Plate. It is covered by a one-year warranty from the date of purchase. Warranty repairs are subject to inspection and evaluation by the company.
What’s In The Box
- 4 x Bolts
- 2 x Washers
- Mitchell Top Plate
- 2 x Nuts
Product Usage Instructions
- Inspect the contents of the package to ensure that you have received all the items listed above.
- Set up the Mitchell Top Plate by attaching it to the horseshoe properly as shown in the image.
- Attach the Mitchell Base to Bowl Camera Adapter to the Mitchell Top Plate.
- Use the bolts, washers, and nuts to secure the camera or accessory to the Mitchell Top Plate.
- If you encounter any issues or have any concerns with the product, please contact the company immediately for support and assistance.
Note: The product does not include the horseshoe, which is sold separately.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Mitchell Top Plate Setup
-
Mount the Mitchell top plate matching the threads on the horseshoe mount (Not Included).
-
Insert the bolts to secure the Mitchell top plate to the horseshoe (Not Included) properly as shown in the image.
Feature: Mitchell Top Plate is the perfect solution to all your Mitchell- mount accessory needs. -
After inserting the bolts in the Mitchell top plate, tighten them with the help of Allen key then mount the fluid head (Not Included) on the Mitchell top plate.
-
After mounting the fluid head (Not Included) on the Mitchell top plate, tighten the Castle ring from the bottom as shown in the image.
-
Unlock the fluid head (Not Included) then remove the fluid head top plate by pushing the push pin button.
-
Attach the plate to the bottom, matching the camera’s threads as shown in the image.
-
Tighten it properly using a screwdriver. Then mount the camera (Not Included) onto the fluid head by sliding.
-
Now setup is ready to use.
YOUR PROAIM MITCHELL BASE TO BOWL CAMERA ADAPTER MITCHELL TOP PLATE ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty
We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability
We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, or lack of care of the product, or service by anyone other than our company.
Contact Us
In case of any kind of dissatisfaction, please Contact us immediately and
we promise our utmost support and care until you use our product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>