Newcook RSV Multi Purpose Cooker Instruction Manual

Newcook RSV Multi Purpose Cooker

Product Information

The product is a multi-purpose cooker that can be used as a robot de cocina, robot de cuisine, robot da cucina, or as a multi-purpose cooker. It comes with built-in temperature sensors and artificial intelligence that allows users to cook all kinds of food in the same cooker. The cooker automatically keeps food warm without spoiling the quality, texture, or flavor of the food. It also features a heat function that allows users to reheat dishes directly from the fridge without losing the quality of the food. The product is equipped with a smart chip that detects the temperature inside the recipient and adjusts the power according to the selected menu. It can cook for one to ten diners and adapts the power to the amount of food.

Product Usage Instructions

1. Before the First Use: To disinfect the cooker from any harmful substances, it is advisable to use the steam function for 8 minutes with a measure of vinegar or lemon and half a liter of water.

2. Important Safeguards: Follow all safety precautions mentioned in the manual.

3. Product Specifications: Refer to the manual for product specifications.

4. Parts and Accessories: The product comes with carrying handle, vaporera, cubeta interior, exterior, cuerpo principal, sensor de temperatura, tapa, tapa interior, contenedor de agua, panel de control, resistencia (placa de calor), and
   botonera.

5. Menus and Control Panel: Refer to the manual for menus and control panel information.

6. How to Cook: Refer to the manual for cooking instructions.

7. Programming a Dish: Refer to the manual for programming a dish instructions.

8. Cooking Tips: Refer to the manual for cooking tips.

9. Cleaning and Maintenance: Refer to the manual for cleaning and maintenance instructions.

10. Tabla de Errores: Refer to the manual for error codes and troubleshooting information.

Before the First Use

• Read all instructions carefully.
• Do not immerse electrical components of Newcook Multi-purpose Cooker in any liquids.
• This appliance is not intended for use by children.
• Do not operate the appliance if it is damaged in any manner.
• Do not use the accessories provided for other than the Newcook Multi-purpose Cooker, irreparable damage to the accessories might result.
• Do not expose the appliance to direct sunlight or to the elements
• To avoid the risk of damage, do not use the Newcook Multi-purpose Cooker on or near heat sources such as oven, stove tops or ceramic hobs.
• Do not operate the appliance for anything other than its intended use.
• Before the first use, clean the Newcook Multi-purpose Cooker with the steam function, adding one litre of water and a measure of vinegar.
• Save these instructions.
• Do not come near the steam valve when the steam is being released: It might be very hot!

IMPORTANT! In order to disinfect the cooker from any harmful substances, it is advisable to use the steam function for 8 minutes with a measure of vinegar or lemon and half a litre of water

Important Safeguards

• Be sure that the recipient is securely locked in place before operating the Newcook.
• Do not press the Cancel button or unplug the appliance whilst cooking.
• To avoid problems of smell or flavour, keep the lid and the silicone seal clean.
• To avoid potential accidents, place the robot on a levelled and stable surface only.
• Do not use the recipient for anything other than its intended use.
• Don’t operate the Warm or Reheat menus whilst the spoon or other cooking utensils are inside.
• Use cooking utensils made of non-scratching materials such as wood, plastic or silicone to avoid damaging the recipient’s non-stick coating.
• Don’t try to disassemble the Newcook Multi-purpose Cooker. This will void the warranty.
• Do not place dishcloths or other objects on the steam valve since this may obstruct it.
• Do not keep water inside the appliance unless it is cooking.
• In case of disruption while cooking, do not force the lid open.
• When using the steam function tray, poor two cups of water into the recipient.
• Keep children away from the appliance: It operates at high temperature and might release steam.
• Be sure not to switch off the Newcook Multi-purpose Cooker while in Warm menu.
• To better preserve your meals, keep the lid closed while operating the Warm menu.
• The Newcook Multi-purpose Cooker keeps most dishes in perfect condition for up to 12 hours. Longer periods may gradually affect the flavour or texture of foods.
• Do not use toxic chemicals near the appliance! This might pose a serious danger
• Don’t come near the steam valve when the steam is being released.

Product Specifications

1. The Newcook Multi-purpose Cooker cooks in all possible ways achieving the most traditional flavours and textures. To do so it is fitted with built-in temperature sensors so that you can cook all kinds of food in the same cooker.
2. It automatically keeps food warm when it has finished the cooking, without spoiling the quality, the texture or the flavour of the food. You can enjoy hot food at any time, however late you are.
3. It features a heat function. The Newcook Multi-purpose cooker features a cooking system meaning you can reheat your dishes directly from the fridge without losing the quality of the food, since it heats solids and liquids alike.
4. Artificial intelligence: Newcook Multi-purpose Cooker features a smart chip that detects the temperature inside the recipient, adjusting the power as per the selected menu. You can also cook in the same time for between one and ten diners, since it adapts the power to the amount of food.
5. Different types of cooking: With the Newcook Multi-purpose Cooker there are 8 different programmes for cooking your food, meaning you can cook all types of recipes, bakes, roasts, stews, grilled, fried, sautés, steamed, slow-cooked, soup, pasta, rice and other traditional dishes.

Parts and accessories

1. Carrying handle: Located on the upper part of the cooker. You can easily pick up and carry.
2. Push button: Simply press the push button to open the lid.
3. Display: This is the control panel you use to programme the Newcook Multi-purpose Cooker functions.
4. Recipient: aluminum alloy for greater efficiency of heat distribution. Covered with more than 3 layers of non-stick for maximum strength.
5. Silicone seal

Accessories:
Steamer, recipient, spatula, spoon, measurer, recipe book and operating instructions.

Menus and control panel

• Rice : adjusts time and power for cooking rice automatically, will stop the cooking time when the rice is ready to eat.

• Steam (fast cooking): Specially designed for using with one or two cups of water and the backing tray. Cook 3 to 99 minutes.

• Slow heat: Simulating those traditional stews that need many hours cooking on low heat, with your multi-purpose cooker you can cook from 300 to 990 minutes.

• Soup : Perfect for soups with pasta or vegetables. Cook 20 minutes to 99 minutes.

• Oven: It reaches temperatures of up to 170 degrees and is programmable for up to 330 minutes. It is the highest heat menu of the Newcook Multi-purpose Cooker.

• Stews: This is the menu we use when we want to cook a stew with the lid on. By default, has 3 minutes, you can program up to 99 min.
  Frying: Strong heat, therefore ideal for instantly cooking sautés and preheating the recipient before cooking the selected menu. You must use it with the lid opened. Cook 10 to 99 minutes.

• Grill: This is ideal for use with the lid closed; the heat is intermediate, therefore ideal for grilled vegetables or meat programs. Cook 3 to 99 minutes.

• Warming: This appears automatically at the end of the menu cycles. Likewise, when we use the warming menu to keep recently cooked food warm.
  Circle symbol: This appears when we are cooking; it means that the cooker is pre-heating and the duration varies depending on the selected menu, quantity and type of food you are going to cook.

BUTTONS

• ON: Press this button to start the cooking cycle, press it after selecting the menu or the waiting time.
• OFF : Press this button three times to cancel any function. When the warm function is on, press OFF to cancel , the display shows “0000”.
• Warm : This function connects automatically after each menu cycle when the cooker finishes cooking and indefinitely until you cancel it. Press this button to select the keep warm function, in display “—-”.
• Menu : Press this button to select the required menu. It will bright.
• Temp : Press this button to change the power / temperature at any time. The cooking power is indicated with the digits shown on the left of the display screen. There are a total of 3, with 1 being the lowest and 3 the highest. Temperature 2 is selected by default (for any menu) except for frying, that you can use temperature 3.
• Cooking time : Press this button to increase the cooking time before select the Menu (minutes). If you hold down the button will increase the time in 10 minute intervals.
• RSV: Press this button to set the waiting time, the robot will cook automatically. If you hold down the button will increase the time in 10 minute intervals.

IMPORTANT
Temp 1: use only to heat
Temp 2: always use it for cooking Temp 3: use only with open lid for frying

How to cook

1. Clean the recipient and place it in the space in the Newcook Cooker with the ingredients.
2. Select a MENU : Use the menu button to select the type of cooking you prefer, robot will list.
3. Choose the POWER: Once the cooking time has been set, use the Temp button to adjust the cooking temperature, always choose Temp. 2 for any menu, 3 for the frying menu and 1 for heat.
4. Select COOKING TIME: Once the menu has been selected, increase the cooking time by pressing + or reduce it by pressing -. Between 1 and 99 minutes can be selected in all menus except for the slow cooking menu in which the time intervals are 10 minutes, from 10 through to 990 minutes, and oven baking up to 330 minutes.
5. Cook: Once the cooking power has been established, if you wish to start cooking press the Cook button, but if you want to access the programming mode, select the RSV button.
6. Warm : If you want to keep food warm, select the Warm button two times, will enter a reheat function until you cancel this program by pressing OFF.
7. Whilst your Newcook Multi-purpose Cooker is cooking, the screen will show a circling cursor and once the ideal cooking conditions have been reached, the remaining cooking time will be shown on the display, which counts down to the end of the cycle.
8. When the cooking cycle has ended, the opening process will be shown on the display screen —-, and you may now open the lid.
9. After each menu, the Keep Warm menu will connect automatically for an indefinite time, to keep your food warm
   IMPORTANT: For safety, do not remove the steam valve for cooking.

Programming a dish

You can program the robot to automatically cook without being present, so just into the ingredients, the desired time to eat and let the robot cook for you.

1. Chosee the recipe: Select the Menu, temperature and cooking time.
2. RSV: Once you have selected the menu, the cooking time and power, you may then programme cooking by pressing the “RSV” button.
3. Eating time: By pressing the Hour + button we adjust the hours and the Min – button we adjust the minutes. We should programme how many hours and minutes are remaining before mealtime. Therefore, if it is 08:00 am and we want to eat lunch at 14:00, we should programme 6:00 h.
4. By pressing the ON button we set the eating time and the remaining time until the food is ready to eat will be shown on the screen. By pressing the Temp button, the selected power and cooking times will be shown on the display screen.
5. Please remember that in this mode you select the time you want to eat, and not the time to start cooking. Newcook Multi-purpose Cooker will automatically calculate when it has to start cooking so that the meal is ready at the time you want to eat. If you are late home for the meal, remember that Newcook Multi-purpose Cooker will keep it warm for you until you cancel the menu.
   Always program the robot, at least 2 hours in advance.

How to cook

1. Clean the recipient and place it in the space in the Newcook Cooker with the ingredients.
2. Select a MENU: Use the menu button to select the type of cooking you prefer, robot will list.
3. Choose the POWER: Once the cooking time has been set, use the Temp button to adjust the cooking temperature, always choose Temp. 2 for any menu, 3 for the frying menu and 1 for heat.
4. Select COOKING TIME: Once the menu has been selected, increase the cooking time by pressing + or reduce it by pressing -. Between 1 and 99 minutes can be selected in all menus except for the slow cooking menu in which the time intervals are 10 minutes, from 10 through to 990 minutes, and oven baking up to 330 minutes.
5. Cook: Once the cooking power has been established, if you wish to start cooking press the Cook button, but if you want to access the programming mode, select the RSV button.
6. Warm: If you want to keep food warm, select the Warm button two times, will enter a reheat function until you cancel this program by pressing OFF.
7. Whilst your Newcook Multi-purpose Cooker is cooking, the screen will show a circling cursor and once the ideal cooking conditions have been reached, the remaining cooking time will be shown on the display, which counts down to the end of the cycle.
8. When the cooking cycle has ended, the opening process will be shown on the display screen —-, and you may now open the lid.
9. After each menu, the Keep Warm menu will connect automatically for an indefinite time, to keep your food warm
   IMPORTANT: For safety, do not remove the steam valve for cooking.

Programming a dish

You can program the robot to automatically cook without being present, so just into the ingredients, the desired time to eat and let the robot cook for you.

1. Chosee the recipe: Select the Menu, temperature and cooking time.
2. RSV: Once you have selected the menu, the cooking time and power, you may then programme cooking by pressing the “RSV” button.
3. Eating time: By pressing the Hour + button we adjust the hours and the Min – button we adjust the minutes. We should programme how many hours and minutes are remaining before mealtime. Therefore, if it is 08:00 am and we want to eat lunch at 14:00, we should programme 6:00 h.
4. By pressing the ON button we set the eating time and the remaining time until the food is ready to eat will be shown on the screen. By pressing the Temp button, the selected power and cooking times will be shown on the display screen.
5. Please remember that in this mode you select the time you want to eat, and not the time to start cooking. Newcook Multi-purpose Cooker will automatically calculate when it has to start cooking so that the meal is ready at the time you want to eat. If you are late home for the meal, remember that Newcook Multi-purpose Cooker will keep it warm for you until you cancel the menu.
   Always program the robot, at least 2 hours in advance.

Cooking tips

For daily use of Newcook Multi-purpose Cooker, and once you are used to how it works, the following tips may be useful:

• Your Newcook Multi-purpose Cooker can cook however you want, in one step or in several. If you want to cook more tasty dishes, you can sauté before cooking or programme a recipe. In this case, we advise you to use the Fry menu with the lid open and on maximum power. Preheat the recipient with oil and sauté on this menu before continuing with the recipe.
• To grill fish or meat, heat the recipient with a little oil inside whilst preparing the ingredients. Once the recipient is hot, place the fillets inside to brown the sides. Afterwards turn the fillets over and finish cooking the dish on the relevant menu.
• If food is not fully cooked through, this may be for one of two reasons: You forgot to select the right temperature, or the quality of the food means that it requires more or less cooking time. Make the relevant changes and cook again.
• With Newcook Multi-purpose Cooker you can use any kind of moulds suitable for use in an oven or grill. If you use metal moulds, make sure they do not scratch the non-stick surface.
• Bear in mind that the quality and quantity of the food can vary the parameters of the recipes provided for the cooker.

Cleaning and Maintenance of the Cooker

Only 3 items actually get dirty when you are cooking, the lid, the steam outlet and the recipient, and therefore these three parts are the ones that need to be cleaned:

• Lid : The lid can be wiped with a damp cloth or with a little washing-up liquid and suds.
• Steam outlet: This can be wiped with a damp cloth or with a little washing-up liquid and suds.
• Recipient: The inner recipient is made from aluminium and features a revolutionary, high-durability non-stick coating. Therefore cleaning it has been made simple because the food hardly sticks to it. You can use a damp cloth or a sponge with a little soap. If you want to wash it in the dishwasher, you may.
  Sometimes, the plastic housing gets dirty, which you may clean with a damp cloth. If you spill food inside the housing, clean it will a cloth, taking into account that if water enters, it can short-circuit and affect the functioning of the cooker.
  IMPORTANT! It is advisable to change the silicone ring seal and clean the valves once a year, depending on how often you use the cooker. Please contact an authorised service centre when you have had the multi-purpose cooker for more than one year.

TROUBLESHOOTING

Turn off the robot, let cool a few minutes and reschedule. If the error persists, contact a technician.

Producto de confianza new lux

Documents / Resources

| Newcook RSV Multi Purpose Cooker [pdf] Instruction Manual
RSV Multi Purpose Cooker, RSV, Multi Purpose Cooker, Purpose Cooker, Cooker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>