HyperX Cirro Buds Pro True Wireless Earbuds User Guide
- June 12, 2024
- HYPERX
Table of Contents
HyperX Cirro Buds Pro True Wireless Earbuds
Product Information: HyperX Cirro Buds Pro True Wireless Earbuds
The HyperX Cirro Buds Pro are true wireless earbuds that provide high-quality audio and a range of features for a great user experience. The earbuds come with a charging case that can be used to charge the earbuds on-the-go. The earbuds also feature touch sensors, a proximity sensor, and microphones for easy control and communication.
Quick Start Guide
It is recommended that the earbuds and charging case be fully charged before first use.
Charging
To charge the earbuds, place them in the charging case and close the lid. If the charging case is not connected to a power source, the charging case status LED will show which earbuds are charging:
- Yellow – Left earbud
- Purple – Right earbud
- Cyan – Both earbuds
To charge the charging case, connect a power source to the USB-C port on the bottom of the case. The charging case status LED will flash the current battery level. The LED will then breathe to indicate the charging status until turning solid, indicating a full charge.
The charging case status LED also indicates the battery level of the charging case:
- Solid Green – 100%
- Breathing Green – 71% – 99%
- Breathing White – 30% – 70%
- Breathing Red – < 30%
Powering on and off the Earbuds
The earbuds can be powered on and off using the touch sensors:
- One press – Play/Pause or answer a call
- Two presses – Previous track or reject a call
- Three presses – Toggle Gaming Mode/Noise Control Off
- Long press – Activate mobile assistant
The proximity sensor can be used to activate the earbuds when they are taken out of the charging case.
For more detailed information, please refer to the user manual.
Overview
- A Charging contacts
- B Proximity sensor
- C Microphone
- D Touch sensor
- E Charging case
- F Charging case button
- G Charging case status LED
- H USB-C port
- I Ear tips (large, small)
- J USB-C to USB-A cable
Charging
It is recommended that the earbuds and charging case be fully charged before first use.
To charge the earbuds, place them in the charging case and close the lid. If the charging case is not connected to a power source, the charging case status LED will show which earbuds are charging.
| CHARGING CASE STATUS LED | EARBUD S CHARGING |
|---|---|
| Yellow | Left |
| Purple | Right |
| Cyan | Left & Right |
To charge the charging case, connect a power source to the USB-C port on the bottom of the case. The charging case status LED will flash the current battery level. The LED will then breath to indicate the charging status until turning solid, indicating a full charge.
Once fully charged, if the charging case’s lid is opened or the
button is pushed, the LED will turn off.
Powering on and off the Earbuds
To power on the earbuds, open the charging case. The earbuds will power on and
the charging case status LED will flash to indicate the battery level of the
charging case. The earbuds can also be powered on outside of the case by
holding the touch sensors for 3 seconds.
To power off the earbuds, return them to the charging case and close the lid.
The earbuds will power off and the charging case status LED will indicate
which earbuds are charging. The earbuds can also be powered off outside of the
case by holding the touch sensors for 8 seconds.
Charging
- Power on the earbuds. The earbuds will automatically attempt to reconnect to their last Bluetooth® enabled device(s).
- The earbuds will automatically enter pairing mode anytime they are not connected to a Bluetooth® device. To enter pairing mode while connected to a Bluetooth® device, use the device’s settings to disconnect from the earbuds.
- On your Bluetooth® enabled device, search for and connect to HyperX Cirro Buds Pro.
- At this point, an additional Bluetooth® enabled device that had been paired to the earbuds previously can be reconnected to allow for multipoint connectivity.
Earbud Controls
Left Earbud
| STATUS | 1 PRESS | 2 PRESSES | 3 PRESSES | LONG PRESS |
|---|---|---|---|---|
| Playing Media | Play/Pause | Previous Track | Toggle Gaming Mode/ Noise Control | |
| O | Activate Mobile Assistant | |||
| Receiving Call | Answer Call | Reject Call | X | X |
| In Call | X | End Call | X | X |
Right Earbud
Audio and Noise Control Modes
Charging Case Button
Press the charging case button to check the charging case’s battery level,
indicated by flashing the case’s status LED. 
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at :
hyperx.com/support
WARNING : Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>