KENDALL HOWARD 1915-3-800-12 Phantom Class Open Frame Swing-Out Rack User Guide
- June 12, 2024
- KENDALL HOWARD
Table of Contents
KENDALL HOWARD 1915-3-800-12 Phantom Class Open Frame Swing-Out Rack
Product Information: PHANTOM CLASS OPEN FRAME SWING-OUT RACK
The PHANTOM CLASS OPEN FRAME SWING-OUT RACK is a wall-mounted rack designed
for providing storage space for electronic equipment.
The product comes in two sizes, part number 1915-3-800-12 & 1915-3-800-18, and
includes a main frame, front angled brace, rear angled brace, swing-out brace,
upper stop/latch, lower stop, nylock nut, 10-32 screw, flat washer, black cap
and 6-32 screw. The installation of the rack requires a standard hex wrench
set, Phillips screwdriver and drill.
Product Usage Instructions
- Read and understand the entire manual before installing the rack.
- Support is available through phone, email, mail or web for any queries regarding the installation.
- Use the tools mentioned in the manual to install the rack.
- Attach the front angled brace to the rear angled brace using the 10-32 screws and nylock nuts.
- Install the main frame to a suitable wall stud. For added stability, install hardware through the slots in the back channel.
- Install the angled braces to the main frame using the 10-32 screws.
- Install the angled brackets to the wall with a mounting spacing of 16 on center.
- Swing the gate open. Install the upper latch and lower stops with the 10-32 screws.
- Attach the swing-out brace to the upper and lower stops with the provided 6-32 screws and washers.
- Swing the gate to the closed position and install the 6-32 screws and flat washers into the front of the frame.
- Install the four black caps in the locations shown in the manual.
- Refer to the warranty section for any defects or issues with the product.
Support
Support is available through the following methods:
By Phone from 8:00 AM to 5:00 PM CST. 651.213.1333
By Email
customerservice@kendallhoward.com
By Mail 10152 Liberty Lane, Chisago City, MN 55013
By Web www.kendallhoward.com
Disclaimer
DISCLAIMER: Kendall Howard LLC. endeavors to make this manual accurate and
complete. However, Kendall Howard LLC makes no representations or warranties
of any kind, expressed or implied, about whether the use of products contained
herein would infringe any rights or the correctness, accuracy, or reliability
of the information contained herein or that said information covers all
details, conditions, or variations. The information herein does not provide
for every possible contingency in connection with the installation or use of
the product(s). The information contained in this document is subject to
change without notice or obligation. Kendall Howard LLC assumes no
responsibility for the accuracy, completeness, or reliability of the
information contained in this document. Any reliance placed on the information
is therefore strictly at your own risk.
Tools Needed:
Standard Hex wrench set, Phillips Screwdriver & Drill
Component Identification
What’s Included?
Installation Instructions
Step 1:
Attach the Front Angled brace to the Rear Angled brace using the 10-32 screws
and Nylock nuts. 
Step 2:
Install the main frame to a suitable wall stud as shown. For added stability,
we recommend installing hardware through the slots in the back channel.
Mounting hardware is not included.
Step 3:
Install the angled braces to the main frame using the 10-32 screws.
Step 4:
Install the angled brackets to the wall. The mounting spacing is 16” on
center. Mounting hardware is not included.
Step 5:
Swing the gate open. Install the upper latch and lower stops with the 10-32
screws
Step 6:
Attach the swing out brace to the upper and lower stops with the provided 6-32
screws and washers.
Step 7:
Swing the gate to the closed position. Install the 6-32 screws and flat
washers into the front of the frame shown below.
Step 7:
Install the four black caps in the locations shown below.
Warranty
GENERAL: Kendall Howard offers all users of our products the following Limited Warranty against defects in material and workmanship. Please read your warranty carefully. This Warranty sets forth our responsibilities in the unlikely event of a defect and tells you how to obtain resolution.
TERMS OF WARRANTY: Kendall Howard products are warranted to be free of defects in material and workmanship. If any part or portion of the Kendall Howard product fails to conform to the Warranty, Kendall Howard, at its option, will furnish new or factory remanufactured products for repair or replacement of that part.
WARRANTY EXTENDS TO FIRST PURCHASER FOR USE, NON-TRANSFERABLE: This
Warranty is extended to the first person, firm, association, or corporation
for whom the Kendall Howard product specified herein is originally sold for
use in the United States (the “User”). This Warranty is not transferable or
assignable without the prior written permission of Kendall Howard.
ASSIGNMENT OF WARRANTIES: Kendall Howard assigns to User any warranties which
are made by manufacturers and suppliers of components of the Kendall Howard
product and which are assignable, but Kendall Howard makes NO REPRESENTATIONS
as to the effectiveness or extent of such warranties, assumes NO
RESPONSIBILITY for any matters which may be warranted by such manufacturers or
suppliers and extends no coverage under this Warranty to such components.
DRAWINGS, DESCRIPTIONS: Kendall Howard warrants for the period and on the terms of the warranty set forth herein that the Kendall Howard product will conform to the descriptions contained in Kendall Howard final invoices, orders, proposals (as modified), and other Kendall Howard descriptive documents (“Descriptions”). Kendall Howard does not control the use of any Kendall Howard product. Accordingly, it is understood that the Descriptions are NOT WARRANTIES OF PERFORMANCE and NOT WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE.
WARRANTY CLAIMS PROCEDURE: Within a reasonable time, but in no case to exceed thirty (30) days, after User discovers a defect, User shall contact Kendall Howard. Subject to the limitations specified herein, a Kendall Howard customer service representative will repair or replace the non-conforming Kendall Howard product warranted hereunder, without charge for materials. User will not be charged for labor if performed within thirty (30) days of product purchase. In all other instances, the User will be charged for labor performed at Kendall Howard’s then-current rates. Kendall Howard shall assume shipping costs for replacement products and return of the defective product to Kendall Howard. Warranty coverage will be extended only after Kendall Howard inspection determines there is a defect as claimed and shows no signs of treatment or use which would void the coverage of this Warranty.
WARRANTY PERFORMANCE OF COMPONENT MANUFACTURERS: It is Kendall Howard’s
practice, consistent with its desire to remedy Warranty defects most promptly
and effectively possible, to cooperate with and utilize the services of
component manufacturers and their authorized representatives in the
performance of work to correct defects in Kendall Howard components.
Accordingly, Kendall Howard may utilize third parties in the performance of
Warranty work, including repair or replacement hereunder, where, in Kendall
Howard’s opinion, such work can be performed in less time, and with less
expense.
ITEMS NOT COVERED BY WARRANTY: THIS WARRANTY DOES NOT COVER DAMAGE OR DEFECT
CAUSED BY misuse, improper application, wrong or inadequate electrical current
or connection, negligence, inappropriate on-site operating conditions, repair
by non- Kendall Howard designated personnel, accident in transit, tampering,
alterations, a change in location or operating use, exposure to the elements,
Acts of God, theft or installation contrary to Kendall Howard’s
recommendations or specifications, or in any event if the Kendall Howard
serial number has been altered, defaced, or removed. THIS WARRANTY DOES NOT
COVER installation costs, external circuit breaker resetting or maintenance or
service items, and further, except as may be specifically provided for herein,
does NOT include labor or shipping costs arising from the repair or
replacement of the Kendall Howard product, or any part thereof, or charges to
remove same from any premises of User. THIS WARRANTY IS VOID if the User
alters the product in any way.
LIMITATIONS: THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE USER’S SOLE AND EXCLUSIVE REMEDY IS REPAIR OR
REPLACEMENT OF THE KENDALL HOWARD PRODUCT AS SET FORTH HEREIN. IF THE USER’S
REMEDY IS DEEMED TO FAIL OF ITS ESSENTIAL PURPOSE BY A COURT OF COMPETENT
JURISDICTION, KENDALL HOWARD’S RESPONSIBILITY FOR PROPERTY LOSS OR DAMAGE
SHALL NOT EXCEED ONE TIMES THE NET PRODUCT PURCHASE PRICE. IN NO EVENT SHALL
KENDALL HOWARD ASSUME ANY LIABILITY FOR INDIRECT, SPECIAL, INCIDENTAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER, INCLUDING WITHOUT
LIMITATION LOST PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, WHETHER ANY
CLAIM IS BASED UPON THEORIES OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, TORT,
OR OTHERWISE.
MISCELLANEOUS: NO SALESPERSON, EMPLOYEE, OR AGENT OF KENDALL HOWARD IS
AUTHORIZED TO ADD TO OR VARY THE TERMS OF THIS WARRANTY. Warranty terms may be
modified, if at all, only in writing signed by a Kendall Howard officer. This
Warranty is effective as of the date of Kendall Howard receipt of full payment
and supersedes all previous warranties Kendall Howard reserves the right to
supplement or change the terms of this Warranty in any subsequent warranty
offering to User or others. If any provision of this Warranty should be or
becomes invalid and/or unenforceable during the warranty period, the remaining
terms and provisions shall continue in full force and effect. User must
complete the attached User Information Card and forward it to Kendall Howard
within thirty (30) days of receipt of the Kendall Howard product. This
Warranty is given in and performance hereunder is to be construed under the
laws of the State of Nebraska. This Warranty represents the entire agreement
between Kendall Howard and User concerning the subject matter herein and
supersedes all prior or contemporaneous oral or written communications,
representations, understandings, or agreements relating to this subject.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>