Foxtheon iGo3600 Portable Power Station User Manual

: June 12, 2024
: Foxtheon

**Portable Power Station User Manual

**

Disclaimer

Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the terms of use and disclaimer in User Manual and stickers on the product before use. Users take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your area. You are solely responsible for being aware of all relevant regulations and using Foxtheon products in a compliant way.

Introduction

This product is a portable energy storage power station for home and outdoors, with large capacity, small size, lightweight, high safety, and large output power. It can be quickly split into two small portable power sources for separate use, and the two modules can rotate work to keep the load never powered off. Its multiple outlets can accommodate a variety of small household appliances, and its multiple charging methods can be used. This makes it an essential product for indoor and outdoor use.

Getting Started

Product Details

LCD Screen

How To Change

220VAC Input
Use the provided AC charging cable to connect the mains and energy storage AC input terminals, and the power station will be charged automatically. When the power station is full, the LCD screen displays 100% power. When fully charged, disconnect the charging cable.

20A socket is recommende for AC charging

Car Charging

Use the provided DC charging cable to connect the vehicle output outlet and the power station EC5 input terminal, and the power station will be charged automatically. When the power station is fully charged, the LCD screen displays 100% power. When fully charged, disconnect the charging cable.
Car Charging

The product can be charged by using the car charging interface on the car. The product supports 12V/24V car charging and the default charging current recommended that the car should be changed in the starting stats to avoid car battery loss and failure to start.

Solar Energy Charging

The solar energy transfer cable is used to connect the solar energy outlet and the power station EC5 input terminal. The power station will be charged automatically. When the power station is fully charged, the LCD screen displays 100% power. When fully charged, disconnect the charging cable.
Solar Energy Charging

*Before connecting the solar panel, ensure n 12V-41 ire that the output voltage of the solar panel is within 12v-40V to avoid damage to the product

How To Use

Turn on
Press the power switch to turn on the device. After the device is turned on, the screen enters the waiting interface. After 6 seconds, the screen enters the display status interface and the power switch indicator stays on.

Hibernation
The default hibernation time of the product is 15 minutes. If no operation is performed on the product for 15 minutes, the product enters the hibernation state and the shutdown screen is displayed.

Power off
Press and hold the power switch for 2S, and the screen will display the usage of the power station, and then enter the shutdown interface.

Function setting interface
4.1 Press the power switch to start the power station;
4.2 In the power startup interface, click the AC switch four times (must be in the startup interface state). After entering the startup interface, Continuous click the power switch two times to enter the “Menu” interface;
Using Instruction

Instructions for battery pack’ s insertion, removal, and installation

Press the power switch to start the power station;

In the power startup interface, continuous click the power switch two times to enter the “Popup Battery” interface;
Using Instruction

Press the AC switch to eject the battery.
Using Instruction

220V AC Output

Under the startup state, press the AC switch and insert the electrical equipment when the key indicator lights up.
Using Instruction

Vehicle Output
When the device is powered on, it can be directly inserted into the electrical equipment.

Type—C / USB Output
When the device is powered on, it can be directly inserted into the electrical equipment.

Tumn on and off the UPS
Turn on the Power and AC switch ,hold down the AC switch for 5 seconds to enable the UPS function and the UPS icon is displayed. Hold down the AC switch for 5S or the Power switch for 28 to turn off the UPS.The UPS is shut down by default after it is powered on again.

FAQS

What type of battery is used in this product?

This product uses a high-quality solid lithium-ion battery.

What devices can be equipped at the AC output port of this product?

he AC output port of this product has a rated power of 3200W and a peak power of 3800W. It can power most consumer electronic products. However, it is recommended that you confirm the power of the electrical appliances before use, and ensure that the total power of all load devices is less than the rated power.

How do | know how long the product’ s power lasts?

The display screen displays the battery lifetime, which can be used to estimate the charging time required for general devices with stable power usage.

How do | know that the product is charging?

When charging, the display screen will show the remaining charging time, and the power indicator circle outside the battery capacity percentage will rotate cyclically and indicate the input power,

How do | clean this product?

Wipe this product with a dry, soft, and clean cloth or tissue.

How do | store the product?

When storing this product, please turn the product off and then storeitin a dry and ventilated place at room temperature. Do not store this product near water. When this product is stored for a long period, it is recommended that the battery be discharged to 30% and then charged to 80% every three months to extend the service life of this product.

Can this product be brought on board a plane?

No.

Is the actual output capacity consistent with the capacity indicated in the

user manual?

The capacity marked in the user manual is the rated capacity of the battery pack. The actual output capacity of the product is lower than the capacity specified in the user manual because there is a certain efficiency loss during the charging and discharging process.

Foxtheon iGo3600

Safety Instructions

Itis strictly prohibited to place this product near heat sources, such as fire or heating furnaces.
Itis strictly prohibited for this product to come into contact with any liquid. Do not immerse this product in water or allow it to get wet. Do not use this product in the rain, damp conditions, or wet environments.
Using this product in strong static or strong magnetic field environments is prohibited.
It is prohibited to disassemble this product in any way or puncture this product with sharp objects.
It is prohibited to use wires or other metal objects to cause this product to short-circuit.
Do not use unofficial components or accessories. If replacements are necessary, please visit Foxtheon’ s official sales channel for the relevant purchase information.
When using this product, please strictly follow the ambient temperature for use in this user manual. Overly high temperatures may cause the battery to catch fire or even explode; while overly low temperatures will seriously degrade product performance to the point that it can no longer meet normal use requirements.
Itis prohibited to stack heavy objects on this product.
It is prohibited to block the fan during use, or keep the product in unventilated or dusty spaces.
Please avoid impacts, falling, dropping, or strong vibrations. In the case of severe external impact, please turn off the power immediately and stop using the product. Please keep the product properly secured during transport to avoid vibration and impact.
If the product accidentally falls into the water during use, placeitin a safe open area, and keep away from the product until it has completely dried. Once dried, the product should not be re-used, and should beproperly disposed of according to the method described in Section 2.2 “Disposal.” If the product catches fire, please use a fire extinguisher or fire-fighting equipment in the following recommended order: water or mist, sand, fire blanket, dry powder, and carbon dioxide fire extinguisher.
If the interface of this product becomes dirty, wipe it off with a dry cloth.
Handle this product with care to prevent it from being damaged due to overturning. If the product is overturned and seriously damaged, immediately turn off the power and place the battery in an open area, being sure to keep it away from combustible materials and people; and dispose of it following the requirements of local laws and regulations.
Keep this product out of reach of children and pets.
When conditions permit, be sure to fully discharge the battery of this product before placing the product in a designated battery recycling box. This product contains a battery, which is a hazardous chemical and is strictly prohibited from being placed in an ordinary garbage can. For relevant details, please comply with the local laws and regulations regarding battery recycling and disposal.
If the battery cannot be fully discharged due to the fault of the product itself, do not dispose of the battery in a battery recycling box directly. Contact a specialized battery recycling company for further disposal.
An over-discharged battery cannot be started. Please dispose of it as waste.

Specifications

General Info

Net Weight| Approximately 23.4kg
Dimensions| 449x240x33lmm
Capacity| 3600Wh 57.6V
Output Ports

AC (x4)| Pure sine wave, 100V-120V (60Hz)
max 2500W, surge 2800W
DC| 13.6 V=16A+ 1A, max200W
USB (x4)| 5V=3A,15W2;QC3.02,5V=3A 9V=2A
12V=1.5A 18W
Type-C (x2)| 5V=3A 9V=3A 12V=3A 15V=3A 20V=3A,
max60W
Input Ports

AC Input| AC100V-120V (60Hz) max2400W
DC Input| DC12V, max100W; DC24V, max200W
Solar Charging Input| 12V-40V, max 400W
Battery Info

Cell Chemistry| Solid lithium-ion battery
Cycle Life| The remaining capacity is still above
80% after 1500 cycles
Protection Type| High-temperature protection, low-temperature protection, over-discharge protection, over-charge protection, overload protection, short- circuit
Environmental Operating Temperature

Optimal Operating
Temperature| 20°C to 30°C
Discharge Temperature| -20°C to 60°C
Charge Temperature| -20°C to 60°C
Storage Temperature| -20°C to 45°C

Storage & Maintenance

Ideally, use and store the product between 20°C(68°F) to 30°C(86°F), and always keep it away from water, intense heat, and sharp objects. Do not store in temperatures above 45°C(113°F) or below -10°C (14°F) for an extended period.
Storing a battery with a low charge for a long period shortens its lifespan.IGo 3600 mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure itis about 80% before putting the iGo 3600 into long-term storage, and then once every three months, discharge the battery to 30% and recharge it back to 80%.

Abnormal Indication and Handling

code	specification	Recovery methods
E001	Battery A overcharge
protection	Pause charging and wait for

automatic recovery
E002| Battery Aover-discharge protection| Pause the discharge and plug in the charging plug-in time to charge
E003| Battery A overcurrent
protection| Pause the discharge and wait for
automatic recovery
E004| Battery A overcurrent
protection| Pause charging and wait for
automatic recovery
E005| Battery A dischargeovertemperature protection| Pause the discharge and wait for automatic recovery
E006| Battery A charging over temperatureprotection| Pause charging and wait for automatic recovery
E007| Battery A SOC
protection| Pause the discharge and wait for
automatic recovery
E008| Battery B overcharge
protection| Pause charging and wait for
automatic recovery
E009| Battery B over-dischargeprotection| Pause the discharge and plug in the charging plug-in time to charge
E010| Battery B overCurrent
protection| Pause the discharge and wait for
automatic recovery
E011| Battery B overcurrent
protection| Pause charging and wait for
automatic recovery
E012| Battery B dischargeovertemperature protection| Pause the discharge and wait for automatic recovery
E013| Battery B charging overtemperatureprotection| Pause charging and wait for automatic recovery
E014| Battery B SOC
protection| Pause the discharge and wait for
automatic recovery
E015| Inverter input short
circuit protection| Pause use, remove the load and
charging plug, and restart the
| | machine; If the fault cannot beremoved, contact the manufacturer’ s after- sales service;
E016| Inverter input
overload protection| Pause the use and wait for automatic
recovery to reduce the power
E017| Inverter inputUndervoltage protection| Pause the use and plug in the charging plug-in time to charge
E018| Inverter inputovervoltage protection| Pause for automatic recovery
E019| Inverter input overtemperatureprotection| Pause for automatic recovery
E020| LV hardware failure| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter-sales service;
E021| HC hardware failure| Pause use, remove the load and
charging plug, and restart the
| | machine; If the fault cannot be removed, contact the manufacturer’ safter- sales service;
E022| Abnormal communication of inverter| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter-sales service;
E023| Inverter outputovercurrent protection| Pause the use and wait for automatic recovery to reduce the power
E024| Inverter output short
circuit protection| Pause for automatic recovery
E025| Inverter output under-voltage protection| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter-sales service;
E026| Inverter DCovervoltage protection| Pause for automatic recovery
| | after-sales service;

E037

| Abnormal MOS tube of battery A| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter-sales service;
E038| Abnormal MOS tube
of battery B| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter- sales service;
W001| Low Battery Warning| The battery is low. You are advised to
charge it right away
W002| Battery temperaturealarm (charge 60°C discharge 65°C)| High battery temperature
W003| Inverter 1615
temperature alarm
(120°C)| The internal inverter temperature is high. You are advised to reduce thepower
W004| Inverter 8026
temperature alarm| The internal inverter temperature is
high. You are advised to reduce the
E027| Inverter DCundervoltage protection| Pause for automatic recovery
E028| Inverter output zero crossing fault| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter-sales service;
E029| Inverter output overtemperatureprotection| Pause for automatic recovery
E030| Inverter output
overvoltage| Pause for automatic recovery
E031| Failure of the inverter parameter configuration| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter-sales service;
E032| DC input voltage is abnormal. Procedure| Pause use, remove the load andcharging plug, and restart the machine; If the fault cannot be
| | removed, contact the manufacturer’ s
after-sales service;
E033| Abnormal DC input voltage| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter-sales service;
E034| Failure of inverter
hardware| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter- sales service;
E035| Abnormal sampling of battery A| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot be removed, contact the manufacturer’ safter-sales service;
E036| Abnormal sampling of battery B| Pause use, remove the load and charging plug, and restart the machine; If the fault cannot beremoved, contact the manufacturer’ s