AOVX GM100 Goods Tracker User Guide

AOVX GM100 Goods Tracker

Introduction

Device overview

main functions

• Light Monitoring Technology
  24H real-time monitoring and recording the change of light. When an asset is abnormally unboxed, it will trigger an alarm to the platform.

• Temperature and Humidity Monitoring Technology
  Integrated with high-precision and wide-range temperature and humidity sensor. 24H real-time monitoring and recording the change of temperature and humidity.

• Comprehensive Monitoring Technology
  The device monitors the assets in an all aspects. In case of severe vibration, Abnormal temperature and humidity, or abnormal light, alarms will be generated automatically.

• Support buffer data
  When the device enters an area with no network signal, the device stores the location information temporally and uploads the historical location information to the platform when the device is back online.

• Multiple Positioning Technology
  Integrate GNSS positioning, LBS base station positioning, and other positioning technologies to fix the location of assets in real-time. Support electronic fences, transportation route planning and location deviation alarms*.

• Data Visibility Technology
  We provide web-based visualized management platform. This kind of insight enables you to be smarter in your planning and make more proactive, data-based decisions.

• OTA Technology and Configuration Flexibility
  Parameter configuration and firmware maintenance can be done locally and remotely(Servers and SMS).
  Dual Server
  The device supports dual IP simultaneous reporting.

• **Data encryption **
  808 protocol data encryption supports RSA/AES/TEA.

• Network and Band Configuration

Set up your device

How to insert SIM card

1. Remove the back cover.
2. Then insert the Nano SIM card;
3. Turn the switch to I. Then check the LED light is in normal state. See LED indicators.

platform configuration
Quickly set up your device by sending SMS commands to it: Table 1 SMS commands .

More details about the commands in the list can be find in AOVX AT commands.

Default configuration settings

• Report Interval
  • Report: Report every 3600s by default.
  • Sample: Sampling every 3600s by default.
• Device configuration
  • Work mode: Optional.
  • G sensor: Range:±4G;Threshold:100; Time:3; Interval time:10 by default.
  • Temp &Humi sensor: Interval:10s; Tmax:40; Tmin:10;Hmax:50; Hmin: 10 by default.
  • Light: Threshold:500; Interval:10s by default.
  • Timezone: UTC+8 by default.
  • GNSS Galaxy: GPS+BD by default.
• Protocol
  • Protocol: Type: JT808 by default; Ver:2013; Encry: NULL; Link: TCP by default. Reportmask, Bule toothmask and sensormask are optional.

Installation

• placed directly with the goods
• Install via 3M tape

LED light indications

The red light shows the battery state of the device. The blue light shows the system state.More details find in the table2.

LED indication
Table 2 LED indication:

Safety Information

This message contains information on how to operate GM100 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device! To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device.

• Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.
• All wireless data-transferring devices produce interference that may affect other devices which are placed nearby.
• The programming must be performed using a PC with an autonomic power supply.
• Installation and/or handling during a lightning storm is prohibited.
• The device is susceptible to water and humidity.
• AOVX is not responsible for any harm caused by wrong cables used for connection between PC and GM100
• WARNING! Do not use GX100 device if it distracts driver or causes inconvenience due to GM100 placement. Device must not interfere with driver.
• Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them to battery recycle bin found in stores.

FCC Statement

This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:

1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and the your body.

www.aovx.com

References

• AOVX Tracker Solutions - AOVX
• Sign in to your account

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>