hansgrohe 72406000 Bath Mixers Instruction Manual

October 30, 2023
hansgrohe

hansgrohe 72406000 Bath Mixers

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.

Installation Instructions

  • Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
  • The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
  • The plumbing codes applicable in the respective countries must be observed.

Technical Data

Operating pressure : max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C / 4 min

  • Safety against backflow
  • The product is exclusively designed for drinking water!

Symbol description

  • Do not use silicone containing acetic acid!

  • **Adjustment

**

  • Maintenance

  • Dimensions

  • Flow diagram

  • Spare parts

  • **Special accessories

**

  • Cleaning

  • Operation

  • Test certificate

Trouble Shooting

Fault Cause Remedy
Mixer stiff Cartridge defective, calcified Exchange cartridge
Mixer dripping Cartridge defective Exchange cartridge
Diverter not operating Residue Clean converter / grease O-rings
Water pressure to low Increase water pressure
Diverter defective Exchange diverter

Hot water temperature too low, no cold water. Instantaneous water heater starts up when cold water is selected.| Hot water limiter incorrectly set| Set hot water limiter
Crossflow| Exchange cartridge

Assembly

Assembly
Assembly
Assembly
Assembly
Assembly
Assembly

Adjustment

To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not recommended.

Symbol
Adjustment
Adjustment
Adjustment

Cleaning

Cleaning recommendation / Warranty / Contact

QR code

http://www.hansgrohe.com/cleaning-recommendation

Cleaning recommendation

http://www.hansgrohe.com/cleaning-recommendation

Warranty

http://www.hansgrohe.com/cleaning-recommendation

Contact

http://www.hansgrohe.com/cleaning-recommendation

Dimensions

PuraVida
15447XXX

Metris
31451000

Metris S
31466000

Metris
31487000

Focus
31946000

Talis
32477000

Novus
71046000

Logis
71407000

Metropol
32546XXX / 74546000

Talis E
71474XXX

Rebris S
72467XXX
Rebris E
72469XXX

Talis S
72406000

Vernis Shape
71469XXX

Vernis Blend
71467XXX

Vivenis
75416XXX

Finoris
76416XXX

Flow diagram

Flow diagram

Operation

Operation

Spare parts

XXX = Colors
000 = Chrome Plated
140 = Brushed Bronze
340 = Brushed Black Chrome
400 = White/Chrome Plated
670 = Matt Black
700 = Matt White
990 = Polished Gold-Optic

Metropol 32546XXX
Metropol 74546000

Spare parts

PuraVida 15447XXX
Metris 31451000
Logis 71407000
Talis E 71474XXX

Spare parts

Spare parts

Vernis Shape 71469XXX
Vivenis 75416XXX
Finoris 76416XXX
Spare parts

Special accessories

  • extension 25 mm #13595000
  • Extension Set 22 mm (when wall is not deep enough) #15597XXX, #13597000, #13593XXX

Special accessories

Special accessories
Special accessories

Maintenance

Maintenance
Maintenance
Maintenance
Maintenance
Maintenance
Maintenance

Test certificate

| P-IX| DVGW| SINTEF| NF|
---|---|---|---|---|---
15447XXX| PA-IX 18097/IDC| | | |
31451000| | | | |
31466000| PA-IX 18097/IDC| BN0685| | | X
31487000| PA-IX 18097/IDC| | | |
31946000| PA-IX 18097/IDC| | | |
32477000| PA-IX 18097/IDC| BN0685| | |
32546XXX| | | | |
71046000| | | | |
71407000| PA-IX 18097/IDC| | | |
71474XXX| PA-IX 18097/IDC| | | |
72406000| PA-IX 18097/IDC| | | |
74546000| | | | |
71467XXX| PA-IX 18097/IDC| | | |
71469XXX| PA-IX 18097/IDC| | | |
75416XXX| PA-IX 18097/IDC| DM0707| | |
76416XXX| PA-IX 18097/IDC| | | |
72467XXX| | | | |
72469XXX| | | | |

Other Models

PuraVida
15447XXX

Metris
31451000

Metris S
31466000

Metris
31487000

Focus
31946000

Talis
32477000

Metropol
32546XXX

Novus
71046000

Logis
71407000

Talis E
71474XXX

Talis S
72406000

Metropol
74546000

Vernis Blend
71467XXX

Vernis Shape
71469XXX

Vivenis
75416XXX

Finoris
76416XXX

Rebris S
72467XXX

Rebris E
72469XXX

Customer Service

Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach ·
Telefon +49 (0) 78 36/51-1282 ·
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com

hansgrohe Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

hansgrohe User Manuals

Related Manuals