OPUMO SQUARE Smartwatch Instruction Manual

SQUARE Smartwatch
Instruction Manual

SQUARE Smartwatch

Thank you for choosing our smart watch. You can fully understand the functions and operation methods of the equipment by reading this manual. This equipment is not a medical instrument, and the measured data and results are for reference only, not as a basis for diagnosis and treatment. Our company reserves the right to modify the contents of this manual without any prior notice.

Product configuration: a packing box, a manual and a host.
This product supports IP68 waterproof, supports wearing in the rain and washing hands, and  can’t be worn in hot shower or sauna, which can’t prevent water vapor. If water enters the water due to not following the instructions, the company will not make free warranty.

Key description:
Turn the upper key: you can zoom in and out the smart style menu and switch the dial up and down. Click to enter the main menu, and then double-click to switch the menu style.
Lower key: long press the switch on and off, then short press the off screen, and short press the on screen when off screen.
Touch Description: Click to enter, and swipe right to return. In the standby interface, swipe down to enter the status bar, swipe up to enter the message notification, swipe right to enter the main menu, swipe left to enter the common functions, and click enter to select the common functions and set the sequence.

Charging instructions: this product uses a wireless charger, which supports the USB interface between the mobile phone charger and the computer within 5V. Putting the watch on the concave side of the charging seat will automatically adsorb and charge, and it takes about 3 hours to fully charge.

Connection between the watch and the mobile phone: First, the mobile phone should download the APP“MActivePro “to the mobile phone and install it. There are two ways. Mobile browser scans the QR code below to download, or searches for “MActivePro” on the application market to download.

http://pro.microwear.com/

During the installation process, you will be prompted to agree to the permission, and all points agree. After the completion, open “MActivePro” and turn on the Bluetooth of the mobile phone, click the device-add the device at the top, search for “Watch Square” and click the connection. Some mobile phones need to turn on the GPS to search for the Bluetooth name of the watch.

1.  How to set up letter notification: Open “Mactive Pro”-Equipment-Message Reminder, select the corresponding software, and select Open.
2. What should I do if I don’t receive the notice?
3. First of all, the notification function of the watch is only to synchronize the notification function of the mobile phone, such as incoming calls and QQ WeChat letters. If your mobile phone doesn’t receive the notification, it won’t be received either. You should set the notification function in the mobile phone, find the corresponding APP and turn on the notification permission.
4. Return the watch to the factory settings, enter the Bluetooth settings of the mobile phone, and see if the connected device has “Watch Square”. If so, please cancel the pairing, turn off the Bluetooth of the mobile phone, then turn it on and reconnect it.
5. Delete “MActivePro” and download it again. Remember that you are prompted to agree to all permissions during installation, and then reconnect.
   ●Firmware upgrade: When Bluetooth is connected normally, enter “MActivePro” and enter Device-Firmware Upgrade-Update. If the upgrade fails, just re- operate it. If it is not turned on, please charge and activate it to use it normally.。

Introduction of main functions

• Call: Click the Bluetooth 3.0 icon ****in the drop-down menu, and the phone can enter Settings-Bluetooth-Search for “Watch Square” pairing. Bluetooth 3.0 can be turned off to enter low power consumption mode, which can prolong the use time.

• Phone book: After connecting the mobile phone App, you can add 100 common contacts to the watch phone book from the App side.

• Language, time and date: When the watch is connected to the mobile APP, it will synchronize the time and date of the mobile phone. Please select the language of the watch for the first time.

• Standby interface: There are multiple standby interfaces to choose from. In the standby interface, press and hold the screen for 3 seconds to switch the interface. You can download the dial through the APP, or set your favorite photos or pictures as the dial background.

• Message: In the standby interface, you can synchronize the notification function of mobile phone, such as QQ WeChat and other letters. If the details of information are displayed, you should set the notification function of QQ WeChat on mobile phone to display details, and you can display the latest message notification.

• Step counting, mileage and calorie: display the number of steps, mileage and calorie consumption of the day. The data will be saved at 12 o’clock every night and reset to 0.

• Exercise: Click to enter the multi-exercise mode, select a mode, click to enter the start, and right-click to enter the pause interface. Each exercise data includes exercise time, calorie consumption and heart rate.

• Health:
  Heart rate : start monitoring as soon as you enter, and get the heart rate value by scanning the changes of capillaries on the surface of the skin with green light. Draw right to exit. Normal people’s heart rate is generally 60-90 beats/min, professional athletes will be lower than 60, and the highest heart rate of ordinary people is 220- years. Long-term exercise can enhance the cardiopulmonary function.
  Blood pressure: Go to the homepage of the APP, enter the calibration value in the upper right corner of the blood pressure interface point, and start monitoring immediately after entering. When monitoring, please put your hand flat, and the data will come out in about tens of seconds. Generally, the older you get, the higher your blood pressure is, and women are a little lower than men. Electrocardiogram: monitoring begins as soon as you enter. It takes about tens of seconds to get the data by using the technology of combining optical heart rate with electrocardiogram. After the measurement is completed, the electrocardiogram is saved on the mobile phone “MActive Pro”. Blood oxygen: monitoring is started as soon as you enter, that is, the blood oxygen concentration, which is an important physiological parameter of respiratory cycle, and the normal arterial blood oxygen saturation is 95-100%. Women’s health: manage your own physiological cycle and predict reminders in advance.

• Sleep monitoring: This function will be automatically turned on in the background from 22.00 every night to 8: 00 the next morning. You can view the detailed data of sleep quality by connecting the mobile APP.

• Password lock: the password lock will take effect after the screen is turned off for 5 seconds. Entering a 4-digit password will automatically turn on the password function. When unlocking, turn off the switch and you can enter a new password. If you forget the original password, enter 1819 to unlock it directly.

• Stopwatch: Click on the lower right corner to start, and then click on Pause. Click on the lower left corner to segment the timing, click in the middle to view the segment timing details, and right stroke to return. ● Music control: turn on the mobile phone music player first, and then synchronize the operation with the watch.

• About: Click to enter to view the watch model, version number and Bluetooth address.

• Return to factory: Click Reset, and the data will be cleared.

• Alarm clock: alarm clock reminder can be set through the mobile APP.

• Sedentary reminder: sedentary reminder can be set through the mobile APP.

• Looking for a cell phone: a cell phone that clicks on a link will ring.

• Raise your hand to brighten the screen: the mobile phone APP turns on the raise hand to brighten the screen. When the wrist is lifted to automatically brighten the screen, this function is more power-consuming.

Warranty statement

1. When this product is in normal use, if there are product quality problems caused by manufacturing, materials, design and other reasons, the motherboard will be guaranteed free of charge for one year and the battery and charger will be guaranteed for half a year from the date of purchase.
2. Failures caused by the user’s personal reasons do not provide free warranty, as follows:

1. Failure caused by unauthorized disassembly and modification of watches.
   2). Failures caused by careless falling during use.
2. All the damages caused by human factors or the negligence or misuse of a third party (e.g., water entering into the main engine, external force cracking, scratch damage of peripheral components, etc.) are not covered by the warranty.
   4. All the functions of the product are mainly in kind.

Name:
Contact number: it must be consistent with the order receiving number.
Platform store:
Return address:

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>