BEACHWAVER 900W Blow Brush User Guide
- October 30, 2023
- BEACHWAVER
Table of Contents
BEACHWAVER 900W Blow Brush
Product Information: BLOW BRUSHTM
The BLOW BRUSH is a styling tool that comes with an ergonomic design and nylon bristles. It is equipped with Ionic technology that reduces frizz and static for a healthy, shiny smooth finish. The tool is rated at 125V ~ 60Hz 900W and comes with a warranty.
Product Usage Instructions:
- How to Turn On: Turn the Control Ring located near cord and select wind speed or cool blast.
- How to Turn Off: Turn the Control Ring left and align to the O position.
- How to Change Attachments:
- To Place On: Line arrows up and press the attachment down until it clicks into place.
- To Remove: Turn off and allow to cool. Hold down the unlock button and remove the attachment while wearing the glove.
- User Maintenance: Attempting to repair tool yourself voids the warranty.
- Storage When Not in Use:
- Turn off and unplug the styling tool.
- Allow the tool to cool, and store out of reach of children in a safe, dry location.
- Never wrap the cord around the tool as this may cause premature wear of the cord and may lead to cord damage that is not covered under the manufacturer’s warranty.
- Handle the cord carefully to extend cord life, and avoid jerking, bending, or twisting the cord, especially at the plug connection.
- Always remember to turn off the styling tool BEFORE unplugging to avoid any risk of electrical shock or damage.
- Warranty: Please contact customerservice@beachwaver.com for information on how to register your iron or to make a warranty claim.
How To Change Attachments
- To Place On: Line arrows up and press the attachment down until it clicks into place.
To Remove: Turn off and allow to cool. Hold down the unlock button and remove the attachment while wearing the glove.
Specs
3 Heat/2 Speed Settings:
- Cool Temperature I Strong Wind
- Low-Temperature I Low Wind
- High Temperature I Strong Wind
Ionic Technology:
Reduces frizz and static for a healthy, shiny smooth finish.
Ergonomic Design with Nylon Bristles:
Tangle-Free Nylon Bristles 360° Swivel Cord
Control Ring:
To turn on/off and adjust heat/speed settings.
WARRANTY
At The Beachwaver Co.™ we want you to be thrilled with our tools. We want you
to look and feel beautiful. We believe in the quality of our tools and test
each iron thoroughly. We welcome your feedback and in the event of any
problem, we welcome the opportunity to make it right!
The Beachwaver Co. ™ will replace your tool for one year from the date of
purchase if the product is defective in materials or workmanship. In no event
shall The Beachwaver® Co. be liable for any special, incidental or
consequential damages for breach of this or any other warranty, express or
implied, whatsoever. Any implied warranties, obligations or liabilities,
including but not limited to the implied warranty of merchantability and
fitness for a particular purpose shall be limited in duration to the one-year
duration of this written limited warranty. The warranty does not apply in the
following scenarios: any unauthorized party opened the product in an attempt
to fix the product, normal wear and tear, purchasing from an unauthorized
seller, damage caused by misuse or mishandling, or due to user’s failure.
Warranty application is determined in the sole discretion of The Beachwaver®
Co.
PLEASE REGISTER YOUR TOOL FOR WARRANTY!
Please contact
customerservice@beachwaver.com for
information on how to register your iron or to make a warranty claim.
Blow Brush : 125V ~ 60Hz 900W