BEACHWAVER CO 100523 Series Dual Voltage Iron User Guide
- June 15, 2024
- BEACHWAVER CO
Table of Contents
B-SERIES – DUAL VOLTAGE IRONS
USER GUIDE
OPERATION
TO TURN ON
To turn on the Beachwaver® , press and hold the power button for 1 second.
TO TURN OFF
Press the power button for three seconds until all lights have turned off.
TO CHANGE TEMPERATURE
Press the power button to cycle through 3 temperature levels – L (low),
M(medium), and H(high). It is important to always select the proper heat
settings for your hair type.
High: 410ºF (210ºC )
Medium: 350ºF (180ºC )
Low: 290ºF (150ºC )
USER MAINTENANCE
CARING FOR YOUR BEACHWAVER®
The Beachwaver ®is virtually maintenance-free. If surface becomes dirty,
unplug iron and, when it is cool, wipe the exterior with a cloth. If anything
abnormal occurs, contact
Customerservicer@beachwaver.com
for support. Do not attempt to repair iron yourself. Attempting to repair iron
yourself voids warranty.
STORAGE
WHEN NOT IN USE
Turn off and unplug the curling iron. Allow the iron to cool, and store out of
reach of children in a safe, dry location.
Never wrap the cord around the iron, as this may cause premature wear of the
cord and may lead to cord damage that is not covered under manufacturer’s
warranty.
Handle the cord carefully to extend cord life, and avoid jerking, bending or
twisting the cord, especially at the plug connection.
Rotates to curl for you
CLAMP
curl for you! Create a clean section of hair. Open clamp and secure near ends
of hair.
ROTATE
Press arrow button to start rotation. You control it! Remove finger from arrow
button to stop rotation. Hold 2-3 seconds.
RELEASE
Open clamp, slide iron out to release curl. Repeat for beautiful waves!
Follow Us: @TheBeachwaver
WARRANT Y
At The Beachwaver Co.® we want you to be thrilled with our tools. We want you to look and feel beautiful. We believe in the quality of our tools and test each iron thoroughly. We welcome your feedback and, in the event of any problem, we welcome the opportunity to make it right! At The Beachwaver Co.® will replace your styling iron for one year from the date of purchase if the product is defective in materials or workmanship. In no event shall be liable for any special, incidental or consequential damages for breach of this or any other warranty, express or implied, whatsoever. Any implied warranties, obligations or liabilities, including but not limited to the implied warranty of merchantability and fitness for a particular purpose shall be limited to the one-year duration of this written limited warranty. The warranty does not apply in the following scenarios: any unauthorized party opened the product in an attempt to fix the product, normal wear and tear, purchasing from an unauthorized seller, damage caused by miuse or mishandling, or due to user error. Warranty application is determined in the sole discretion of the Beachwaver Co.®
PLEASE REGISTER YOUR TOOL FOR WARRANTY!
Please contact customerservice@beachwaver.com for information on how to register your iron or to make a warranty claim.
TRAVEL-FRIENDLY: 100-240V~ 50-60Hz
Dual voltage. lype A/B plud.
Documents / Resources
|
BEACHWAVER CO 100523 Series Dual Voltage
Iron
[pdf] User Guide
100523 Series Dual Voltage Iron, 100523 Series, Dual Voltage Iron, Voltage
Iron, Iron
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>