ITC 69554 Decor Overhead Light Instruction Manual
- October 30, 2023
- ITC
Table of Contents
ITC 69554 Decor Overhead Light
PARTS/TOOLS NEEDED
| | |
---|---|---|---
Decor Overhead Light| Mounting Screws (Qty: 2)| Butt Splice Connectors (Not
Provided)| Power Drill & 2.25” Hole Saw
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive(+) input.
INSTALLATION INSTRUCTIONS
-
69554 | Determine the installation location and use the bezel to mark the location of the screw holes and wiring hole. 69553 | cut out 2.25” hole for light.
-
69554 | Drill a hole and pull the units wiring through.
Screw down the bezel using the provided screws.
-
69554 & 69553 |Using the wiring diagrams below, wire the light to a three way switch and your incoming 12V DC power.
Test the light. -
69554 |Feed the wires back through the hole and push the light into the bezel. 69553 |Push light into hole.
For warranty information please visit www.itc-us.com/warranty-return- policy
Customer Support
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com