ITC 69636HSS Flip Nav Light Instruction Manual
- October 30, 2023
- ITC
Table of Contents
ITC 69636HSS Flip Nav Light Instruction Manual
TOOLS REQUIREMENT
PARTS/TOOLS NEEDED:
| | |
Navigation Light| Stainless Steel Screws (not provided)| Power Drill| Electric
Jigsaw
Safety Instructions
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Do not install any luminaire assembly closer than 6” from any combustible materials.
-
Determine your installation location and mark the location using the provided template. Once marked cut out the hole.
-
Insert the light into the hole and screw in using stainless steel screws.
-
Attach the male connector on the light (Delphi – 12010973) with the female connector (Delphi – 12015792)on the boat or follow the wiring diagram below.
-
-
Cut out the template below to use as a guide for your hole.
Costumer Support
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>