hansgrohe 27076000 RAINDANCE Shower Set S 100 AIR 3jet/ Unica´S Puro Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
- hansgrohe 27076000 RAINDANCE Shower Set S 100 AIR 3jet/ Unica´S Puro
- Safety Notes
- Technical Data
- Installation Instructions
- Symbol description
- Dimensions
- Flow diagram
- Operation
- Cleaning
- Spare parts
- Test certificate
- Assembly
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 27076000 RAINDANCE Shower Set S 100 AIR 3jet/ Unica´S Puro
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- Children as well as adults with physical, mental and/ or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this shower system.
- Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
- The product may not be used as a holding handle. A separate handle must be installed.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- Shower hoses are only suitable for a connection from the shower to the fitting. Never fit a shut-off device between the fitting and the hose.
Technical Data
- Operating pressure: max. 0,6 MPa
- Recommended operating pressure: 0,1 – 0,4 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account.
- The mesh washer must be insert to protect the overhead shower against incoming dirt by pipework. Incoming dirt leads to defects or/and can damage parts of the shower; such caused faults voids all liability and guarantee claims.
Symbol description
Do not use silicone containing acetic acid!
Dimensions
Flow diagram
Operation
Cleaning
Spare parts
- XXX = Colors
- 000 = chrome plated
- 820 = brushed nickel
- 880 = satin chrome
Test certificate
Assembly
Hansgrohe · Postfach 1145 · D-77761 Schiltach
Telefon: +49 (0) 78 36/51-1282
Telefax: +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>