Hansgrohe 14830000 METROPOL E Lever Kitchen Faucet Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
14830000 METROPOL E Lever Kitchen Faucet
Product Information
The product is a Metropol 14835000. It comes with user manuals and instructions in different languages such as German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian and Bulgarian. The product has technical specifications such as an operating pressure of maximum 1 MPa and a recommended operating pressure of 0.1 – 0.5 MPa. The product has a test pressure of 1.6 MPa and can handle hot water temperature up to the recommended temperature.
Product Usage Instructions
When installing the product, gloves should be worn to prevent crushing and cutting injuries. Ensure that the hot and cold supplies are of equal pressures. Only dishwashers and washing machines certified with the DVGW emblem may be connected to the appliance connection valve without an additional fuse for the Metropol 14835000. If no consumer is connected to the appliance connection valve, it must be plugged.
To adjust the hot water limiter on single lever mixers, please refer to page 35 of the user manual. Do not use silicone containing acetic acid. For cleaning instructions and spare parts information, refer to the enclosed brochure and page 34 of the user manual respectively. For assembly instructions, refer to page 31 of the user manual.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The hot and cold supplies must be of equal pressures.
- 14835000: Only dishwashers and washing machines certified with the DVGW emblem may be connected to the appliance connection valve without an additional fuse. If no consumer is connected to the appliance connection valve, it must be plugged.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms!
Technical Data
-
Operating pressure: max. 1 MPa
-
Recommended operating pressure: 0,1 – 0,5 MPa
-
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI) -
Hot water temperature: max. 80°C
-
Recommended hot water temp.: 65°C
Symbol description
-
To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous flow water heater.
-
Do not use silicone containing acetic acid!
-
Dimensions
-
Flow diagram
-
Spare parts
-
Operation
-
✔ Test certificate
-
Cleaning
Dimensions
Metropol
14830000
Metropol
14835000 
Metropol
14830000 / 14835000 
Operation
Spare Parts
Test certificate
Hansgrohe · Postfach 1145
D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com