hansgrohe 31000XXX Metris C Concealed Lever Basin Mixer Instruction Manual

hansgrohe 31000XXX Metris C Concealed Lever Basin Mixer

Product Information

The product is a shower system available under the brand name Metris. It is available in two models, Classic 31000XXX/31003XXX and S 31162000/31163000. The product comes with user manuals and installation instructions in multiple languages including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian, Bulgarian, and Arabic.

The shower system has a flow limiter and operates on a maximum pressure of 1 MPa. The recommended operating pressure is 1.6 MPa. The hot water temperature is adjustable using a hot water limiter. The product comes with spare parts and cleaning instructions.

Product Usage Instructions

Before using the shower system, please take note of the following safety instructions:

• Wear gloves during installation to prevent crushing and cutting injuries.
• Use the shower system only for bathing, hygienic and body cleansing purposes.
• Ensure that hot and cold water supplies have equal pressures.

Adjusting Hot Water Limiter
If you need to adjust the hot water limiter on single lever mixers, please refer to page 33 of the user manual. No adjustment is necessary when using a continuous flow water heater.

Cleaning
To clean the shower system, please refer to the enclosed brochure for instructions.

Assembly
To assemble the shower system, please refer to page 31 of the user manual for installation instructions.

Technical Data

• Operating pressure: max. 1 MPa
• Recommended operating pressure: 1.6 MPa
• Test pressure: 1.6 MPa
• Hot water temperature: adjustable

Spare Parts
If you need spare parts for the shower system, please refer to page 36 of the user manual.

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The shower system may only be used for bathing, hygienic and body cleansing purposes.
• The hot and cold supplies must be of equal pressu-res.

Installation Instructions

• The fitting must be installed, flushed and tested after the valid norms.
• If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
• Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.

Technical Data

This mixer series-produced with EcoSmart® (flow limiter)

• Operating pressure: max. 1 MPa
• Recommended operating pressure: 0,1 – 0,5 MPa
• Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 80°C
• Recommended hot water temp.: 65°C

Symbol description

• Hot water limiter
  To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous flow water heater.

• Do not use silicone containing acetic acid!

• Dimensions

• Flow diagram

  • with EcoSmart®
  • without EcoSmart®

• Spare parts

• Operation

• Cleaning

Assembly Procedure

How To Use?

Dimension

Flow Diagram

Operation

open

close

cold

hot

Spare Parts

Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com 
Internet: www.hansgrohe.com

References

• Taps for bathrooms, showers and kitchens | hansgrohe INT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>