Sinoxone SOB0018 Speaker Wall Mount Instruction Manual

: October 30, 2023
: SINOXONE

Table of Contents

Sinoxone SOB0018 Speaker Wall Mount
Product Information
Usage Instructions
Parts Required
Assembling Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sinoxone SOB0018 Speaker Wall Mount

Product Information

The product model numbers are SOB0018 and SOB0019. The manual size is 285*210mm. The product is manufactured by Sinox Europe A/S and their contact information is Troensevej 11. DK-9220 Aalborg. The website for the company is www.sinox-europe.com.

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
This product is designed to be installed only on solid concrete walls or brick walls.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Usage Instructions

Read the entire instruction manual before starting installation and assembly.
Contact your local distributor if you have any questions regarding the instructions or warnings.
Ensure that you have received all parts according to the component checklist before installation.
If any parts are missing or faulty, contact your local distributor for a replacement.
Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Note: The product comes with various parts labeled as A, B, C, D, E, W-A, and W-B. Refer to the instruction manual for detailed assembly instructions and refer to the labeled parts as mentioned in the manual.