hansgrohe 27372000 Raindance E Jet Shower Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe 27372000 Raindance E Jet Shower
OTHER MODELS
Raindance E 27372000
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The shower system may only be used for bathing, hygienic and body cleansing
purposes.
Children as well as adults with physical, mental and/or sensoric impairments
must not use this shower system without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from using this shower system.
Do not allow the streams of the shower touch sensitive body parts (such as
your eyes). An adequate distance must be kept between the shower and you.
The arm of the shower head is intended only to hold the shower head. Do not
load it down with other objects!
installation Instructions
-
The fitting must be installed, flushed and tested after the valid norms!
-
Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete.
For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account. -
This mixer cannot be used in conjunction with hydraulically, electronically or thermally controlled instantaneous heaters.
Technical Data
Operating pressure: max. 0,6 MPa
Recommended operating pressure: 0,1 – 0,4 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
**X**Center shower tub- Warm water
- Cold water
- Do not use silicone containing acetic acid!
The wall must be reinforced in this area.
Robinet d’arrêt encastré- Quattro 4-Way Diverter Valve
- Trio 2-Way Diverter Valve with integrated Shut-off valve
Plug the unused outlet.- The waste drain performance must be more than 50 l/min.
- Waste
Dimensions
(see page 31)
Flow diagram
**(see page 33)
**
Spare parts
**(see page 36)
**
Cleaning
**(see page 37)
**
Assembly
**see page 31
**
CUSTOMER SERVICES
Hansgrohe
Postfach 1145
D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail:[email protected] ·
Internet:www.hansgrohe.com
