hansgrohe CROMA 100 Multi, Ecostat S Shower Combination Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
Instructions for use
assembly instructions
Unica’S Puro
28631XXX / 28632XXX
Raindance S Combi
27075000 / 27076000 27077000
Raindance S 100 AIR 3jet/ Unica’S Puro Set
27880000 /27882000
Raindance S 120 AIR 3jet/ Unica’S Puro Set
27884000 / 27886000
Raindance S 150 AIR 3jet/ Unica’S Puro Set
27895000 / 27898000
**** Safety Notes
Gloves should be worn during installation to prevent crushing and
cutting injuries.
Children as well as adults with physical, mental and/ or sensorics
impairments must not use this shower system without proper supervision.
Persons under the influence of alcohol or drugs are prohibited from using this
shower system.
Do not allow the streams of the shower touch sensitive body parts (such
as your eyes). An adequate distance must be kept between the shower and you.
The product may not be used as a holding handle. A separate handle must
be installed.
The shower system may only be used for bathing, hygienic and body
cleansing purposes.
Shower hoses are only suitable for a connection from the shower to the
fitting. Never fit a shut-off device between the fitting and the hose.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account.
- The mesh washer must be insert to protect the overhead shower against incoming dirt by pipework. Incoming dirt leads to defects or/and can damage parts of the shower; such caused faults voids all liability and guarantee claims.
Technical Data
| Operating pressure: | max. 0,6 MPa |
|---|---|
| Recommended operating pressure: | 0,1 – 0,4 MPa (1 MPa = 10 bar = 147 PSI) |
| Hot water temperature: | max. 60°C |
Symbol description
| Do not use silicone containing acetic acid!
---|---
| Dimensions (see page 31 – 34)
| Flow diagram (see page 33)
| Operation (see page 36)
| Cleaning (see page 37) enclosed brochure
| Spare parts (see page 38)
XXX = Colors
000 = chrome plated
820 = brushed nickel
880 = satin chrome
| Test certificate (see page 39)
| Assembly see page 35
| 
---|---
|
| 
| 
| P-IX| DVGW| SVGW| WRAS| KIWA| NF| ACS|
ETA
---|---|---|---|---|---|---|---|---
27075000| | | | | | | |
27076000| | | | | | | X|
27077000| | | | | | | |
28631XXX| | | | | | | X|
28632XXX| | | | | | | X|
27880000| | | | | | | |
27882000| | | | | | | X|
27884000| | | | | | | |
27886000| | | | | | | X|
27895000| | | | | | | |
27898000| | | | | | | |
Hansgrohe · Postfach 1145 · D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>