hansgrohe 14262000 Metropol Bidet Mixer Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe 14262000 Metropol Bidet Mixer Instruction Manual
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The shower system may only be used for bathing, hygienic and body cleansing
purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed
Technical Data
This mixer series-produced with Eco Smart®
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature : max. 80°C
Recommended hot water temp.:
Hansgrohe mixers can be used together with hydraulically and the rmically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Symbol description
To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous flow water heater.
Do not use silicone containing acetic acid!
Dimensions
(see page 34)
Flow diagram
(see page 34)
- with Eco Smart®
- without Eco Smart®
Spare parts
(see page 36)
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Operation
(see page 35)
Cleaning
(see enclosed brochure)
Test certificate
| P-IX| DVGW| SVGW| WRAS| KIWA| NF| ACS| ETA
---|---|---|---|---|---|---|---|---
14061XXX| P-IX 9950/IA| X| X| X| X| | X| X
14068XXX| P-IX 9950/IA| X| X| | X| X| X|
14262XXX| P-IX 9950/IA| X| X| | X| | X|
(see page 35)
Assembly
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>