hansgrohe AXOR UNO2 Bathroom Faucet Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe AXOR UNO2 Bathroom Faucet
Product Information
The user manual provides instructions for using and assembling the product in various languages, including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian, and Arabic. The product is a shower system that can be used for bathing, hygienic and body cleansing purposes. It has a maximum operating pressure of 1 MPa and a recommended operating pressure of 1.6 MPa. The hot and cold supplies must be of equal pressures. The aerator is not equal to DIN EN 246.
Product Usage Instructions
- Before using the product, ensure that the hot and cold supplies have equal pressures. Wear protective gloves during installation to prevent crushing and cutting injuries. The product can only be used for bathing, hygienic and body cleansing purposes.
- To assemble the product, follow the instructions provided in the user manual specific to your language. The user manual also provides technical data such as operating pressure, recommended operating pressure, hot water temperature, and test pressure.
- For cleaning the product, refer to the enclosed brochure for cleaning recommendations. Do not use silicone-containing acetic acid. The product also comes with spare parts that can be ordered separately. There are special accessories available for the product that can be ordered as extras. The installation kit is not included in the delivery.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or
- if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
- The aerator is not equal to DIN EN 246
Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
MODEL
Symbol Description
Do not use silicone containing acetic acid!
Dimensions
Flow diagram
- with EcoSmart®
- without EcoSmart®
Spare parts
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Operation
Cleaning
Cleaning recommendations, see enclosed brochure.
Test certificate
Assembly
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282
· Telefax +49 (0) 7836/511440
E-Mail : [email protected]
Internet: www.hansgrohe.com