hansgrohe AXOR 11024000, 11027000 URQUIOLA Mixer Instruction Manual

: October 30, 2023
: hansgrohe

**

hansgrohe AXOR 11024000, 11027000 URQUIOLA Mixer

hansgrohe-AXOR-11024000,-11027000-URQUIOLA-Mixer-
product

Product Information

The product is a shower system named Urquiola 11024000 / 11027000. The manual provides instructions in multiple languages including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, and Norwegian. The manual includes safety instructions, technical data, installation instructions, spare parts, and special accessories.

Safety Instructions

Gloves should be worn during installation to prevent crushing and cutting injuries.
The shower system may only be used for bathing, hygienic, and body cleansing purposes.
The hot and cold supplies must be of equal pressure.
Do not use silicone containing acetic acid!

Technical Data

Operating pressure: max. 1 MPa
Recommended operating pressure: 1.6 MPa
Test pressure: 1.6 MPa
Hot water temperature:
Recommended hot water temp.: Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0.15 MPa.

Installation Instructions

Gloves should be worn during installation to prevent crushing and cutting injuries.
The hot and cold supplies must be of equal pressure.
Do not use silicone containing acetic acid!
An installation kit is not included in the package and should be ordered separately.
The special tool (58085000) should be ordered separately.

Spare Parts

The manual provides a list of spare parts on page 36.

Special Accessories

The manual provides a list of special accessories on pages 33 and 34. The installation kit and special tool (58085000) should be ordered separately.

Product Usage Instructions

The shower system may only be used for bathing, hygienic, and body cleansing purposes.
The hot and cold supplies must be of equal pressure.
Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0.15 MPa.
Do not use silicone containing acetic acid!
For cleaning instructions, refer to page 35 of the manual.

Assembly Instructions

Refer to pages 31 and 32 of the manual for detailed assembly instructions. Gloves should be worn during installation to prevent crushing and cutting injuries. The hot and cold supplies must be of equal pressure. Do not use silicone containing acetic acid! The installation kit and special tool (58085000) should be ordered separately if needed.

MODEL

Assembly

hansgrohe-AXOR-11024000,-11027000-URQUIOLA-Mixer-fig-1

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries. The shower system may only be used for bathing, hygienic and body cleansing purposes. The hot and cold supplies must be of equal pressures.

Installation Instructions

The fitting must be installed, flushed, and tested after the valid norms. If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)

Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C

Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.