hansgrohe AXOR CITTERIO Faucets Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe AXOR CITTERIO Faucets
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressure.
Installation Instructions
Important: The fitting must be installed, flushed and tested according to the valid norms.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter).
- Rate of flow with EcoSmart: 5 l/min 0,3 MPa
- Rate of flow without EcoSmart: 10 l/min 0,3 MPa
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0.15 MPa. If the continuous water heater causes any problems or there is not enough flow of water, the EcoSmart® located behind the aerator must be removed.
Dimensions
Spare parts
Special accessories
58085000 special tool set (order as an extra)
Operation
- open
- close
Assembly
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>