MODLand HDHH3B0L3W6 Hans Rectangular Smart Touch Wall Mount Bathroom Vanity Mirror Instruction Manual

Table of Contents

Vanity Mirror

CHECK PRODUCT LIST AFTER OPENING THE PACKAGE

TOOLS YOU MAY NEED

Notes

Fix the mounting bar into the wall firstly with the distance as above drawing;
For the mirror with ON/OFF button in the right bottom side, we have the special design to hang the mirror either vertically or horizontally;
The distance between each 2 hanging holes is 7⅞ inch.

Place the mounting bar against the wall and make some marks on the wall
Drill the holes and place the suitable plastic anchors
Screw the mounting bar onto the wall with the screw
Connect the mirror with the main supply.
- We provide plug with mirrors.
- Optional to cut the plug directly, then connect to electrical wiring if using wall switch.
- ATTENTION: PLEASE CUT OFF THE MAIN POWER SUPPLY BEFORE WIRING!
Hang the mirror onto the mounting bar (vertically hanging and horizontally hanging)

ON/OFF and CCT adjustment

Button turns blue when connected to main supply.
Button always on as long as connecting to main supply.
Short-touch the button to turn on/off the mirror.
Adjusting color temperatures (CCT) between warm white and cool white by long-touching the button for seconds.
Finish setting by withdrawing your finger when the color reaches the one you need.
Optional to be wired to wall switch by ON/OFF memory function.

ON/OFF and Dimmer

Anti-Fog Function

Mirror begins to be warm and defog after pressing the defogger button. Press again to quit the anti-fog function.
Note: The defogger will stop automatically after 60 minutes of continuous operation to prevent any damage caused by prolonged high temperature.

Clock/Temperature

(This operation is specific to the clock version)

Turn off the light to set the clock.
Long touch button 1 or 2 for seconds, the Hour will flash, then short-touch button 1 and 2 to set Hour.
Wait for seconds after setting up the Hour, then it will automatically switch to the Minute flash.
Short-touch button 1and 2 to set up the Minute.
Wait seconds after you finish the time setting, the time will be saved automatically.
The clock shows for 5s, and shift to the temperature showing for 2s, then go back to show the clock.

Night Light

It automatically displays the indoor temperature by auto sensing through the temperature sensor.
DO NOT cover the temperature sensor.
Night light will be auto-on/off according to the brightness surrounding when the rocker switch is keeping turned on.
If need turn off the nightlight at night, please turn off the rocker switch manually.

Clean using a soft dry cloth only when turned off. Never use cleaning agents or abrasive materials. Do not allow moisture to come into contact with lamp.

THANK YOU FOR YOUR SUPPORT

We wish you have wonderful experience in our product.
If you have any other needs or queries, please feel free to contact us by email at info@exbriteusa.com, and get replies within 48 business hours.