LIVING SPACES LS9LINCFLBK Lincoln Floor Lamp Instruction Manual

October 30, 2023
LIVING SPACES

LIVING SPACES LS9LINCFLBK Lincoln Floor Lamp

LIVING-SPACES-LS9LINCFLBK-Lincoln-Floor-Lamp-product

Product Information

The Lincoln Floor Lamp is an indoor lighting fixture that comes in two colors; black (LS9LINCFLBK) and silver (LS9LINCFLSL). The lamp is equipped with a polarized plug, and one plug blade is wider than the other. It is essential not to modify the plug or power cord in any way. The lamp has a recommended bulb wattage that should not be exceeded, and it is vital to use only the type of bulb specified. The lamp has a Twin Socket (E) that can hold two light bulbs (F) that are not included in the package.

Product Usage Instructions

Important Safety Instructions:

  • This lighting fixture is for indoor use only.
  • Keep flammable materials away from the bulb.
  • Do not open the product or alter the wiring in any manner.
  • Follow precautions provided with power cord extension cords.
  • Use only the type of bulb specified.
  • Do not exceed the recommended bulb wattage.
  • Unplug lamp and allow bulb to cool before changing bulb.

Assembly Procedure:
Refer to Figure 1 in the user manual for a visual guide on the assembly procedure.

  1. Attach Tube (B) onto the threaded rod on Lamp Base (A) by twisting until secure.
  2. Attach Tube (C) onto the threaded rod of Tube (B) by twisting until secure.
  3. Attach Tube (D) onto the threaded rod of Tube (C) by twisting until secure.
  4. Once all Tubes (B-D) are attached, pull the lamp Cord (J) outwards from the Lamp Base (A) until Twin Socket (E) meets Tube (D).
  5. Secure the Twin Socket (E) to Tube (D) by twisting until secure. Do not overtighten.
  6. Attach Post (H) to Twin Socket (E) and twist until secure.
  7. Attach Shade (G) to the top of Post (H) and secure with Finial (I) by twisting until secure.
  8. Install Light Bulbs (F) to Twin Socket (E).
  9. Plug in 2-Prong Polarized Cord (J) into the outlet.
  10. Turn on the lamp using the Pull Chain Switch (K).

Care & Cleaning:

  1. To clean, wipe with a soft, dry cloth.
  2. Do not use cleaners, scouring pads, etc.

Troubleshooting:
If the bulb does not light, it could be due to the bulb being burnt out or damaged. Confirm that power is on and that the lamp is plugged in. If the problem persists, replace the bulb.

Important Safety Instructions

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only the type of bulb specified. Keep flammable materials away from bulb. DO NOT OPEN the product or alter the wiring in any manner. Extension cord: Follow precautions provided with power cord.

UNPACKING:
Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of packaging materials.

Parts Included

  1. LAMP BASE (A)
  2. TUBE (B)
  3. TUBE (C)
  4. TUBE (D)
  5. TWIN SOCKET (E)
  6. LIGHT BULB (F) (NOT INCLUDED)
  7. SHADE (G)
  8. POST (H)
  9. FINIAL (I)
  10. CORD WITH PLUG(J)
  11. PULL CHAIN SWITCH (K)LIVING-SPACES-LS9LINCFLBK-Lincoln-Floor-Lamp-fig-1

Assembly Procedure

Refer to Figure 1.

  1. Attach Tube (B) onto the threaded rod on Lamp Base (A) by twisting until secure.
  2. Attach Tube (C) onto the threaded rod of Tube (B) by twisting until secure.
  3. Attach Tube (D) onto the threaded rod of Tube (C) by twisting until secure.
  4. Once all Tubes (B-D) are attached, pull the lamp Cord (J) outwards from the Lamp Base (A) until Twin Socket (E) meets Tube (D).
  5. Secure the Twin Socket (E) to Tube (D) by twisting until secure. Do not over-tighten.
  6. Attach Post (H) to Twin Socket (E) and twist until secure.
  7. Attach Shade (G) to the top of Post (H) and secure with Finial (I) by twisting until secure.
  8. Install Light Bulbs (F) to Twin Sockets (E).
  9. Plug in 2-Prong Polarized Cord (J) into the outlet.
  10. Turn on the lamp using the Pull Chain Switch (K).

Care & Cleaning

  1. To clean, wipe with a soft, dry cloth.
  2. DO NOT USE cleaners, scouring pads, etc.
  3. Unplug the lamp and allow the bulb to cool before changing the bulb.

Troubleshooting

Problem: Possible cause: Correct by:
Bulb does not light Bulb is burnt out or damaged Replace bulb
Power to lamp is off Confirm power is on
Lamp is not plugged in Confirm lamp is plugged in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

LIVING SPACES User Manuals

Related Manuals