Baymak Elegant Plus 12 R32 Split Klima Air Conditioner USER MANUAL
- October 30, 2023
- Baymak
Table of Contents
- Baymak Elegant Plus 12 R32 Split Klima Air Conditioner
- SAFETY PRECAUTIONS
- REMOTE CONTROLLER
- INSERTING BATTERIES IN THE REMOTE CONTROLLER
- OPERATING MODES AND SETTINGS
- COOLING OPERATION MODE
- HEATING OPERATION MODE
- AIR CIRCULATION (FAN) OPERATING MODE
- DRY OPERATION MODE
- Frequently Asked Questions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Baymak Elegant Plus 12 R32 Split Klima Air Conditioner
OUR VALUABLE CONSUMER; Thank you for choosing our high-quality device. Your device will be productive for many years. Please read the User’s Guide carefully before using your device for it to work. Keep it in a place where you can always access it. In this booklet prepared for you; There are very useful information and explanations regarding the correct and efficient use of your air conditioner. Please take care not to use your air conditioner without reading this booklet. Any irregular If you feel it working, immediately refer to the user manual. You can get service with this booklet, containing information about the authorized service. “Authorized Service Booklet*” is given. The first operation of the air conditioner must be performed by the Authorized Service. is required to be done. Otherwise, your air conditioner will be out of warranty. For these devices, the Ministry of Customs and Trade, Consumer Protection and Market Surveillance General The useful life determined by the Directorate is 10 years. Manufacturers and vendors in accordance with the relevant law Availability of spare parts necessary for the devices to perform their functions within this period. and undertakes to provide service to the device.
SAFETY PRECAUTIONS
- Before starting to operate your device, please read the User’s Guide carefully. In this way, you can get full efficiency from the device. you know.
- Safety precautions are listed under the headings ” < WARNING” and ” A CAUTION”.
- If the precautions described under “A WARNING” are not followed, incorrect use can result in serious injury or life-threatening injuries. can open. However, failure to take the measures described under “& ATTENTION” may cause serious and permanent problems. why could it be? Make sure that you fully comply with these safety precautions, these safety precautions brought to your attention
- It is very important for your safety.
- The meanings of the symbols and signs in the booklet;
- Keep the booklet handy for reference at any time after reading it and give it to the new user if the user changes.
- We recommend that you have your device serviced by our authorized service for a healthy and efficient operation.
- The minimum service life determined for these devices is ten (10) years. As required by relevant law
- Manufacturers and vendors have to keep the spare parts necessary for the devices to perform their functions within this period. and undertakes to provide service to the device.
- An authorized Service booklet is provided with your device.
WARNINGS FOR INSTALLATION A WARNING Your device must be installed by Baymak Authorized Air Conditioning Services. It is not because the installation was done by people other than Baymak Authorized Air Conditioning Services. water leak, electrical leakage, or may cause errors that may cause a fire. Faulty, incorrect installation of air conditioners made by persons other than the authorized service. Operation problems, malfunctions and damages that may occur on the product due to incomplete or incomplete production are not covered by the warranty.
WARNINGS ABOUT REFRIGERANT AND ITS APPLICATIONS A WARNING This air conditioner has a flammable R32 refrigerant. Installation, maintenance, repair etc. on devices with this type of refrigerant. The procedures must be carried out by persons who have a valid document/certificate obtained from authorized institutions. In the intervention of unauthorized persons or having incomplete information about the refrigerant in the device. In such cases, the device may cause personal injury or property damage accidents.
- By the authorized institution, which approves the working competencies of everyone who interferes with these devices. must have a valid document/certificate issued.
- For maintenance or repair procedures in air conditioners in which R32 is used, necessary security checks are made, It should be done after the risks of accidents that may occur are minimized.
- Low flammability R32 refrigerant is used in the device. There is a risk of fire if it leaks and is exposed to an external source of ignition.
- Since the air conditioner is pressurized, do not drill or be careful when using materials such as screws and nails. Device soot, flame, spark b. Do not expose to sources of ignition or ignition. Otherwise, it may cause serious injury.
- Installation, use, repair, maintenance, or storage of air conditioners using R32 refrigerant. where the operations will be done: the area/room area must be larger than 5m.
- More than 1.7 kg for our devices with capacities of 9000btu, 12000btu, 18000btu, and 24000btu. Too much refrigerant should not be pumped.
- Do not take any additional action to speed up the defrosting processes of the devices, other than those reported by the manufacturer.
- Store the air conditioner in such a way that it does not cause any accidents and does not receive any mechanical damage.
- The device should be protected from continuously operating flame sources (eg a gas appliance in operation) and ignition sources. (for example, an electric heater in operation) should be stored/preserved in an environment where it is out of the question.
- Gas or air other than the refrigerant used in the system should not be mixed into the system. If air enters the system in addition to the refrigerant circulating in the cooling cycle, it may cause very high pressures, which may result in injury or equipment malfunction.
- When a refrigerant leak occurs in the product; Turn off your device, ventilate the environment well, and call the Authorized Service.
- The product contains refrigerant R32, which is not allowed to be released into the atmosphere. The refrigerant should only be collected and disposed of by the authorized installer.
- Please read the instructions carefully before installation, use, and maintenance.
REMOTE CONTROLLER
(WHEN THE DOOR IS IN CLOSED POSITION)
NOTE
The buttons on the Remote Control cover can be used when the cover is
closed.
- O “ON/OFF” Button You can start your air conditioner by pressing this button and turn it off by pressing this button again.
- “SPEED” Button You can change the fan speed of your air conditioner by pressing this button as follows. LOW (LOW) -> MEDIUM (MID) -> HIGH – » AUTO (AUTO) •
- “A’ and “V” Buttons These buttons are used to set the temperature between 16 °C and 32 °C and if desired, the counter of the timer.
- When the “A” button is pressed The set temperature value will increase by 0.5 °C, and when the ‘V’ button is pressed, it will decrease by 0.5 °C. Changing the set temperature quickly It will be enough to keep these keys pressed. A
- ‘COOL’ Button When the “COOL” button is pressed, your air conditioner will operate in cooling mode.
- “HEAT” Button When the “HEAT” button is pressed, your air conditioner will operate in heating mode. ‘SWING$ and SWING ** ” Buttons With the help of the “SWING ‡ and SWING – – ” buttons on the control cover, the up/down and right/left swings of the flaps can be adjusted. can be activated or canceled.
INSERTING BATTERIES IN THE REMOTE CONTROLLER
- Turn the back of the control device. Open the battery protection cover by sliding it in the direction of the arrow as seen in Picture -1.
- Insert the batteries according to the (+) and (-) polar terminals. (Picture -2)
- Replace the battery protection cover by sliding it in the direction of the arrow (Picture -3).
OPERATING MODES AND SETTINGS
AUTO (AUTO) OPERATION MODE
- Press the ON/OFF button and start your air conditioner. While the device is working, press the “MODE button to select AUTO” operation mode. *AUTO” symbol will appear on the LCD screen of the remote control. Now your device decides which mode your device will operate in. will give. If the room temperature is below 24°C, it will operate in HEAT mode, and above it will operate in COOL mode.
- When using this function, you can select the chain fan speed yourself by using the “*SPEED” button as follows. LOW (LOW) – MEDIUM (MID) – HIGH (HIGH) – AUTO (AUTO)
- When you press the “ON/OFF*” button again, the device will turn off.
COOLING OPERATION MODE
- Press the “ON/OFF” button and start your air conditioner. When the device is in operation, press the “MODE® button” on the remote. You can activate the cooling operation mode “COOL” by pressing the “COOL” symbol on the LCD of the remote controller, and the indoor unit ( F. ) symbol will appear on the led screen.
- Set the desired temperature value by pressing the temperature adjustment buttons “A and V* (Up and Down). You can set a temperature value between 16-32°C by creating a temperature increase or decrease.
- While using this function, one of the following fan speed levels can be selected by pressing the “SPEED” button. LOW -> MEDIUM (MID) -> HIGH -> AUTO
- When you press the “ON/OFF” button again, the device will turn off.
HEATING OPERATION MODE
- Press the “ON/OFF” button on the on/off button and start your air conditioner, while the device is running, press the “‘MODE” button on the remote. You can activate the Heating operation mode “HEAT* by pressing. “HEAT” symbol on the LCD of the remote control, Indoor Unit The (g) symbol will appear on the led screen.
- Set the desired temperature value by pressing the “A” and “V” (Up and Down) temperature adjustment buttons. With the help of these buttons; 0.5°C You can set a temperature value in the range of 16-32°C by creating a temperature increase or decrease.
- While using this function, one of the following fan speed levels can be selected by pressing the “SPEED” button. LOW -> MEDIUM (MID) -> HIGH -> AUTO.
- When you press the “ON/OFF™” button again, the device will turn off.
NOTE
When the device is in Heating mode, always close the open doors and
windows. Otherwise, the heating capacity of the device will decrease.
AIR CIRCULATION (FAN) OPERATING MODE
- Press the on/off button ON/OFF and start your air conditioner. “MODE” on the remote control when the device is running You can activate the fan operation mode “FAN” by pressing the button. The “FAN” symbol will appear on the LCD screen of the remote control. This indicates that the fan mode has been activated. The compressor and outdoor fan will not operate in fan mode, only indoor fan and air circulation will be ensured.
- While using this function, one of the following fan speed levels can be selected by pressing the “SPEED” button. LOW MEDIUM (MID) -> HIGH (HIGH) – AUTO (AUTO) When you press the “ON/OFF*” button again, the device will turn off.
DRY OPERATION MODE
- Press the on/off button “ON/OFF” and run your air conditioner. DRY by pressing the “MODE” button while the device is running. select the operating mode. The “DRY” symbol will appear on the LCD screen of your remote control. This indicates that the “DRY” mode has been activated. specifies.
- Set the desired temperature value by pressing the “A” and “V” (Up and Down) temperature adjustment buttons. With the help of these buttons; 0.5°C You can set a temperature value between 16-32°C by creating a temperature increase or decrease.
- While using this function, the indoor unit fan speed of the air conditioner is controlled by the outdoor unit and cannot be changed by the user. Chaz is in this mode It will operate at LOW or SILENCE fan speed levels to create a more comfortable environment while operating.
- When you press the “ON/OFF*” button again, the device will turn off.
Frequently Asked Questions
What is the cooling capacity of the Baymak Elegant Plus 12 R32 Split Klima?
The cooling capacity of this air conditioner model is typically around 12,000 BTU (British Thermal Units) per hour.
What is the power consumption of the Baymak Elegant Plus 12 R32 Split Klima?
The power consumption of this air conditioner model can vary depending on the specific conditions and settings. However, it is generally rated around 1,200-1,400 watts.
Does the Baymak Elegant Plus 12 R32 Split Klima have a heating function?
Yes, this model typically comes with a heating function in addition to cooling. It can provide both cooling and heating capabilities for year-round comfort.
What is the refrigerant used in the Baymak Elegant Plus 12 R32 Split Klima?
The Baymak Elegant Plus 12 R32 Split Klima uses R32 refrigerant. R32 is a more environmentally friendly refrigerant compared to older refrigerants like R410A, as it has a lower global warming potential.
What are the dimensions of the indoor and outdoor units of the Baymak Elegant Plus 12 R32 Split Klima?
The specific dimensions may vary slightly, but typically, the indoor unit has dimensions around 80 cm (width) x 28 cm (height) x 20 cm (depth). The outdoor unit usually measures around 71 cm (width) x 54 cm (height) x 24 cm (depth).
Does the Baymak Elegant Plus 12 R32 Split Klima come with a remote control?
Yes, this air conditioner model is typically equipped with a remote control. The remote control allows you to conveniently adjust settings such as temperature, fan speed, and mode from a distance.
Does the Baymak Elegant Plus 12 R32 Split Klima have a sleep mode?
Yes, this model usually includes a sleep mode feature. Sleep mode adjusts the temperature and fan speed to provide a more comfortable sleeping environment and conserve energy.
Can I set a timer on the Baymak Elegant Plus 12 R32 Split Klima?
Yes, this air conditioner model typically offers a timer function. You can set a specific time for the air conditioner to turn on or off automatically, which can be useful for energy-saving purposes or scheduling cooling/heating before you arrive home.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>