SEAMAX B07YN76T9H 4 Bow Bimini Top User Manual
- June 9, 2024
- SEAMAX
Table of Contents
SEAMAX B07YN76T9H 4 Bow Bimini Top
Seamax Bimini Top has a built-in aluminum eye-end fitting to install on a
standard oar lock pin (diameter is 10mm / 0.4 inch) of an inflatable boat.
Standard Bimini Package includes 2 nylon deck mounts for aluminum boat or
fibreglass boat use. Seamax aluminum eye-end fitting can turn 360 Degree, it
is rigid and more flexible comparing other types in the market.
Seamax is a professional inflatable boat builder, so we have good knowledge to
make our own style of Bimini. Our solution is the best in the market and
offers PVC and Hypalon both. The product is accepted by many end-users and
resellers in the market. Our Bimini system can support 30 knots boating speed
with no problem.
Important Notice:
- Product keeps out of reach of children.
- Please fold the Bimini top when Vessel Speed + Wind Speed exceed 30 miles (50 km) per hour.
- Seamax Portable Bimini can be fast assembled and disassembly by its Quick Release Spring Lock Buttons.
- Seamax Bimini Top is designed for Inflatable boats with a standard oar lock set, if your boat doesn’t have such an oar lock installed, or you are looking for the perfect condition of the installation, you can purchase our Bimini Accessories –Pontoon Patch Kit. An extra installation job is required.
- If you have an aluminum boat or fibreglass boat, you can use our Bimini Top as well; Our Bimini Accessories – Deck Mount Kit is necessary. An extra installation job is required.
Package Check List
ASSEMBLY AND INSTALLATION
Step 1: Connect the V-Stand Pole with side bows. Easy to use the Spring
Lock Button to connect the poles and V- Stand together.
Step 2: Pass medium bow assembly through the sleeve in front of the top,
and then assemble the side bow and Crossbars by clicking on the Spring Lock
Button.
Step 3: Repeat this procedure for all the bows.
Insert the assembled bows into the appropriate pockets.
Attach webbing straps with allen wrench
3 bow and 4 bow are installed in the same way
Step 4: Please give the Bimini Top a final adjustment on your boat for
the best result. Please tighten the bolts and fasten the strap before using
it.
Bimini top 4 bow & Black Canopy shown
Without Rear Support Pole
With Rear Support Pole
Bimini top 3 bow & Grey Canopy shown
Other Professional Bimini Accessories (Optional)
Seamax Bimini Top is first designed for use on inflatable boats, the standard
fittings for mounting is for use on standard oar locks, if your inflatable
boat doesn’t have oar locks or has a special kind of oar lock, you can
purchase the Pontoon Patch Kit for Inflatable Boats.
If your boat is not an inflatable boat, (such as the aluminum boat or
fibreglass boat), you may need to purchase the Deck Mount Kit for Rigid Hull
Boats.
To support your Bimini Top better, you can use our Rear Support Poles of
Bimini. Please know the Rear Support Poles will require the Pontoon Patch or
Deck Mount to be first installed on your boat.
Bimini Top spare parts are always available from Seamax, please contact us if
your product missing part or damaged.
(support@seamaxmarine.com)
Warranty
Two (2) years Parts Limited Warranty within USA & Canada. 90 days free
replacement guaran-tee on any defective parts. You can contact us to return
the product or parts to the retailer that you purchased them from. If you
purchase it from Amazon or eBay, you can contact Seamax for seller support.
Please visit our website at
www.seamaxmarine.com or email us at
support@seamaxmarine.com.
Toll-Free 1877-907-7766 (Mon-Fri 10 AM to 6 PM Western Time)
Additional Fitting & Accessories
Pontoon Patch Kit for Inflatable Boats:
Traditional Bimini Top sellers had no good solution for Inflatable Boats, they
are either weak to support or hard to install. Seamax developed this special
Bimini Pontoon Fitting Kit for all inflatable boats, Installation Dimensions
are 3”x 5”.
The patch has the curve interface to attach on the pontoon; it is also built-
in a strong stainless bracket to support the Bimini weight up to 100Lbs and 30
knots wind speed. The fitting can turn at 180 degree wide angle, it has no
limitation to installing it at any position. Zodiac dealers recognized its
design and quality as the best solution.
This package also comes with stainless steel hardware, including bolts, lock
pins and wind nuts. You can choose different hardware for your Bimini top as a
temporary or permanent installation solution. PVC & Hypalon boat compatible.
Glue is included in the package.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>