Hopeland HZ540 4-Port Long Distance UHF RFID Module for Fixed Reader Integration User Manual
- October 30, 2023
- Hopeland
Table of Contents
- Hopeland HZ540 4-Port Long Distance UHF RFID Module for Fixed Reader
- HZ540 4-port Long distance UHF RFID Module For fixed reader integration
- General Description
- Key Features
- Typical Applications
- Technical Parameters
- Note:
- Interface Description
- CE Rules
- Importers: XXXXXXX Address: XXXXXXX
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Hopeland HZ540 4-Port Long Distance UHF RFID Module for Fixed Reader
Integration User Manual
HZ540 4-port Long distance UHF RFID Module For fixed reader integration
General Description
The HZ540 module is a miniaturized UHF RFID reader. The core component adopts Impinj Indy R2000 chip as the core platform. It supports ISO 18000-6C/6B, EPC C1G2, users can communicate with their own devices through the UART-TTL serial on the interface, and its wide power supply range (DC4.5V~6V) and configured GPIO interface (IO1-IO4, IO1/IO2 as input, IO3/IO4 as output) can provide users with more choices.
Due to the excellent tag reading distance and multi-antenna design of the module, it can be used as a design solution for small readers.
Key Features
- Support protocol: ISO18000-6B/C EPC C1G2
- Working mode: fixed frequency/frequency hopping optional
- Adjustable RF output power,1 dB step-by-step
- Support multi-antenna polling work or designated antenna work
- Support antenna detection function
- RSSI support: the strength of the signal can be sensed.
- Support tag data filtering
- support Anti-collision algorithm
- Support multiple tags inventory
Typical Applications
- Split-type Fixed RFID Reader integration
- Integrated RFID Reader
- The reader which is designed based on this module can be applied to various wireless RFID application schemes such as article and logistics management, warehouse management, animal management, article anti-counterfeiting, electronic goods monitoring and manufacturing and processing, and production automation.
Technical Parameters
| Operating Voltage | +4.5V ~ +6V |
|---|---|
| Standby Mode Current | < 20mA |
| Operating Current | 5V power supply, output RF power 33dBm, working peak |
current around 2000mA
Size| 78.55×53.5×7.95mm
Air Interface Protocol| EPC C1G2 / ISO 18000-6C, ISO 18000-6B
Frequency Range
| 840MHz~960MHz
US, Canada and other regions following U.S. FCC
Europe and other regions following ETSI EN 302 208 with & without LBT regulations
Output Power| 0~33dBm
Output Power Precision| ±1dB
Receive Sensitivity| ≤-85dBm
Tag RSSI| supported
Antenna port detection| supported
Communication interface| TTL UART serial, Baud rate 115200bps
RF connector type| SMA
Interface cable type| 15P 1.25mm pitch cable
Heat Dissipation| Air cooling with external heat sink
Operating Temperature| ﹣20℃~﹢70℃
Storage Temperature| ﹣40℃~﹢85℃
Operating humidity| ＜95% (﹢25℃)
Note:
- Heat dissipation design should be considered when working continuously for a long time with high output power.
- The power supply voltage should not exceed 6V, otherwise the internal circuit may be damaged.
Interface Description
CE Rules
Hereby, SHENZHEN HOPELAND TECHNOLOGIES CO., LTD. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU
Importers: XXXXXXX Address: XXXXXXX
For the full RED DoC file, Please download it as follow web: http://XXXX.XXXX The distance between user and products should be no less than 20cm
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>