ZKTeco ProMA Series User Guide
- June 4, 2024
- ZKTECO
Table of Contents
- ZKTeco ProMA Series
- Product Overview
- Installation Environment
- Device Installation
- Standalone Installation
- Power Connection
- Lock Relay Connection
- Door Sensor, Exit Button, Alarm and Auxiliary Connection
- Wiegand Connection
- Ethernet Connection
- Login WebServer
- User Registration
- Connection to ZKBio CVSecurity Software
- QR Verification
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZKTeco ProMA Series
Product Overview
Note: ProMA-QR has an additional QR code recognition function than ProMA-RF, ProMA has an additional fingerprint recognition function than ProMA -RF, and the rest are the same.
Installation Environment
Please refer to the following recommendations for installation.
Device Installation
ProMA series installation are the same, the following is an example of ProMA.
- Attach the mounting template sticker to the wall, and drill holes according to the mounting paper.
- Fix the backplate on the wall using wall mounting screws.
- Attach the device to the backplate.
- Fasten the device to the backplate with a security screw.
Standalone Installation
Power Connection
Recommended power supply
Rating of 12V and 3A
To share the device’s power supply with other devices, use a power supply with
higher current ratings.
Lock Relay Connection
The system supports both Normally Opened Lock and Normally Closed Lock. The NO Lock (normally opened when powered) is connected with ‘NO’ and ‘COM’ terminals, and the NC Lock (normally closed when powered) is connected with ‘NC’ and ‘COM’ terminals. The power can be shared with the lock or can be used separately for the lock, as shown in the example with NC Lock below:
Door Sensor, Exit Button, Alarm and Auxiliary Connection
Wiegand Connection
Wiegand card reader connects to the top 4 pins of the Wiegand terminal and the last two pins are used by the Access Controller, as shown in the following figure. It sends the credentials to the device via Wiegand communication.
9 RS485 Connection
The RS485 lets user connect to multiple readers to the device. RS485 can be
connected to the terminal, as shown in the figure below.
Ethernet Connection
Connect the device and computer software over an Ethernet cable. An example is shown below:
Note : In LAN, IP addresses of the server (PC) and the device must be in the same network segment when connecting to ZKBio CVSecurity software.
Login WebServer
All operations such as device information, communication settings, user management and system settings are operated and set up on WebServer.
- Press and hold the Doorbell button of the device until the IP pops up.
- Open a browser to enter the address to log in the WebServer, the address is the https:// Serial IP Address:1443, for example: https://192.168.1.201:1443.![ZKTeco ProMA Series fig 13](https://manuals.plus/wp-content/uploads/2022/09/ZKTeco-ProMA-Series-fig-13.png)
- Enter the account ID and password, the default account ID is: admin, password: admin@123.
Note:
- After logging in for the first time, users need to reset their original password and log in again before they can use it.
- In order to retrieve the password easily, please register a super admin first.
User Registration
Clickon [All Users] on the WebServer to register a new user. Settings include entering user ID, name, password, card number, fingerprint, face, setting user role and access control role.
Click [Register] to complete the registration of fingerprint, face and card number.
Connection to ZKBio CVSecurity Software
- Set the IP address and cloud service server address in the [Advanced Settings] option on the WebServer.
- Click [Access] > [Access Device] > [Device] > [Search Device] to search the device on the software. When an appropriate server address and port is set on the device, the searched devices are displayed automatically.
For more details, please refer to the ZKBio CVSecurity V6600 User Manual.
QR Verification
- In [System] > [Basic Management] > [Parameters] of ZKBio CVSecurity software, set Enable QR Code to ‘’Yes’’, and select the QR code status according to the actual situation.
- On the Server, choose [System] > [Authority Management] > [Client Register] to add a registered App client.
- Open the APP, enter the IP address or domain name of the server, and its port number, scan the QR Code of the new APP client. After the connection is successful, tap on Employee to switch to the Employee Login screen. Enter the Employee ID and Password (Default: 123456) to login.
- Tap [Mobile Credential] on the APP, and a QR code will appear, parallelling the phone screen to the device QR code scanner. For details, please refer to ProMA Series User Manual.
Note
- Place your phone within the range of 15 to 50 (cm) from the device (distance depends on the size of the phone screen), and do not block the device QR code scanner and QR code in the phone screen.
- This feature is only available for ProMA-QR.
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan,
China.
Phone : +86 769 – 82109991
Fax : +86 755 – 89602394
www.zkteco.com
Copyright © 2022 ZKTECO CO., LTD. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>