EVELO Atlas Rack Battery Super Range System Installation Guide
- October 30, 2023
- EVELO
Table of Contents
EVELO Atlas Rack Battery Super Range System
Product Information
The EVELO Omega and Atlas Bicycle Rack Battery is an add-on accessory for the EVELO bicycle models. The rack battery provides additional power to the bike, allowing riders to travel longer distances without worrying about running out of battery. This product is specifically designed for the Omega and Atlas models and includes new, longer bolts for secure mounting of the rack.
Product Usage Instructions
- Open the seatpost quick release and unscrew it to remove the light. Unplug the connector and reassemble and tighten the seatpost quick release.
- Using an allen wrench, remove the four rack mounting bolts from the frame and discard them. New, longer bolts will be included with the rack.
- Remove the battery from the rack and hold the rack in place on the bike. REMOVING THE BATTERY FROM THE RACK PRIOR TO INSTALLATION IS CRUCIAL TO AVOID DAMAGE TO BATTERY AND/OR BICYCLE.
- Using an allen wrench, install the lower mounting bolts. Use the longer bolts from the rack package; the bolts that came on the bike are too short to hold the rack securely.
- Using an allen wrench, install the upper mounting bolts. Use the longer bolts from the rack package; the bolts that came on the bike are too short to hold the rack securely.
- Connect the new taillight to the connector you unplugged earlier. Line up the arrows on each half of the connector and push them together. MAKE SURE REAR BATTERY IS REMOVED AND BICYCLE IS POWERED OFF BEFORE CONNECTING PLUGS.
- Open the cover and plug the battery into the frame port. It will only go in one way, so be aware of the plug orientation. MAKE SURE REAR BATTERY IS REMOVED AND BICYCLE IS POWERED OFF BEFORE CONNECTING PLUGS.
- Your connections should now look like the diagram provided in the manual.
- Go ride your bike!
For any further questions or assistance, please contact EVELO customer service at 877-991-7272 or email them at contact@evelo.com.
This guide shows how to install the rear rack and secondary battery on your new EVELO bicycle. This applies to Atlas and Omega models
INSTALLATION INSTRUCTIONS
- Step 1: Open the seatpost quick release, then unscrew it to remove the light. Unplug the connector, then reassemble and tighten the seatpost quick release.
- Step 2: Using an allen wrench, remove the four rack mounting bolts from the frame and discard. New, longer bolts will be included with the rack.
- Step 3 : Remove the battery from the rack and hold the rack in place on the bike. REMOVING THE BATTERY FROM THE RACK PRIOR TO INSTALLATION IS CRUCIAL TO AVOID DAMAGE TO BATTERY AND/OR BICYCLE
- Step 4 : Using an allen wrench, install the lower mounting bolts. Use the longer bolts from the rack package; the bolts that came on the bike are too short to hold the rack securely
- Step 5 : Using an allen wrench, install the upper mounting bolts. Use the longer bolts from the rack package; the bolts that came on the bike are too short to hold the rack securely.
- Step 6 : Connect the new taillight to the connector you unplugged earlier. Line up the arrows on each half of the connector and push them together. MAKE SURE REAR BATTERY IS REMOVED AND BICYCLE IS POWERED OFF BEFORE CONNECTING PLUGS
- Step 7 : Open the cover and plug the battery into the frame port. It will only go in one way, so be aware of the plug orientation. MAKE SURE REAR BATTERY IS REMOVED AND BICYCLE IS POWERED OFF BEFORE CONNECTING PLUGS
- Step 8 : Your connections should now look like this.
- Step 9 : Go ride your bike!
Questions? Get In Touch:
- 877-991-7272
- contact@evelo.com
- EVELO.COM
First Edition EVELO Omega and Atlas Battery Rack Installation
References
Read User Manual Online (PDF format)
Loading......