CEOTIS CL20S USB Rechargeable Under Cabinet Lights Wireless User Manual
- October 30, 2023
- CEOTIS
Table of Contents
CEOTIS CL20S USB Rechargeable Under Cabinet Lights Wireless
Product Information
- This product is a cabinet light with a motion sensor.
- The product contains small parts that can be hazardous to children if ingested.
- Disassembling the product is not recommended as it may cause the product to become unusable.
- The product contains batteries and is not resistant to high temperatures, so it should be kept away from fire sources.
- The product should not be immersed in water as it may damage the built-in components.
- The motion sensor can only be activated in low light conditions.
- The product comes with a 1.5W LED bulb and has a model type of CL20S.
- The voltage of the product is 5V, and it has a color temperature of 3000K/4500K/6500K with a CRI greater than 80.
- The product has 60 LED lamp beads and a size of 7.8 inches.
Product Usage Instructions
- Ensure that the product is kept away from children to avoid accidental ingestion of small parts.
- Do not attempt to disassemble the product as this may cause it to become unusable.
- Keep the product away from fire sources as it contains batteries that are not resistant to high temperatures.
- Avoid immersing the product in water to prevent damage to its built-in components.
- The motion sensor will only work in low light conditions, so ensure that the area is dimly lit before use.
- To extend the life of the product, charge it before the battery runs out.
- If the cabinet light does not come on, ensure that there is sufficient power and use a USB cable to charge it.
- If the PIR sensor does not work, wait for the light to dim near the cabinet light or check if the sensing distance is too far.
- If unable to troubleshoot the problem, contact customer service for assistance.
- The product comes with a warm white (3000K), nature white (4500K), and cool white (6500K) color temperature, and a sensing distance of 11.5ft.
Manufacturer Information:
- The manufacturer of this product is Meko Lighting Company Limited.
- The manufacturer’s address is No. 2 Songlin East Road, ZengTian Village, Xin An District, Chang An Town, Dongguan City, Guangdong Province, China.
- The manufacturer’s email address is service@ceotishome.com.
Remove the fixture and mounting package from the box and make sure that no parts are missing by referencing the illustration on the installation instructions.
Warning
- This product contains small parts, please take care of children to avoid accidental ingestion.
- This device does not support disassembly, improper disassembly will cause the product to be unusable.
- The product contains batteries and is not resistant to high temperature, please keep away from fire sources.
- Do not immerse the product in water, otherwise the built-in components will be damaged.
- The motion sensor can only be activated in low light conditions.
- Charging before the battery runs out will extend the life of the product.
Tools
Assembly
-
Install the adhesive mounting pad(B) to the cabinet light(Magnetic attraction).
-
Tear off the protective film of 3M tape.
LED Under Cabinet With PIR Sensor USB Charging Cable
-
First short press: turn on always-on mode Second short press: turn on automatic night mode (light flashing prompt)
-
Third short press: shutdown
-
Long press: control brightness
-
LED indicator light introduction
-
Red light (Low battery)
-
Green light (Charging completed)
-
USB charging port
-
Colour temperature adjusting:
-
3000K warm white
-
4500K nature white
-
6500K cool white
PIR Sensor
- Induction range:120° and 11.5ft
Specification
Model| Type| Power| Voltage| Color temperature|
CRI| Number of lamp beads| Size
---|---|---|---|---|---|---|---
CL20S| LED| 1.5W| 5V| 3000K/4500K /6500K| >80| 60LED| 7.8inches
Troubleshooting
Failure | Reason | Remedies |
---|---|---|
Cabinet light does not come on | Insufficient power | Use USB cable to charge |
cabinet lights
PIR sensor does not work| The light is brighter nearby, the sensing distance
is too far| Wait for the light to dim near the cabinet light
Unable to charge| /| If you cannot troubleshoot the problem yourself, please
contact customer service promptly.
Manufacturer: Meko Lighting Company Limited Manufacturer Address: No. 2 Songlin East Road, ZengTian Village, Xin An District, Chang An Town, Dongguan City, Guangdong Province, China. Email: service@ceotishome.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>