Lenovo IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x User Guide

Lenovo IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System

x

Product Information

The IBM 2200VA LCD 2U Rack Uninterruptible Power Supply (UPS) is a withdrawn product designed to provide a clean power source for IT equipment and battery backup in the event of a power failure. It enhances system availability with Advanced Battery Management (ABM) technology, which significantly extends battery service life, allows individual control of receptacle groups to maximize run time for critical devices, and provides a real-time clock that enables precise shutdown and power up of systems in a preferred sequence. The UPS integrates with IBM Systems Director Active Energy Manager to help improve energy management.

The UPS has a bright, easily customizable, and graphical LCD display that lets you configure the device and displays important UPS status information in one of nine languages (English, French, German, Spanish, Russian, Korean, Japanese, Simplified Chinese, and Traditional Chinese). The UPS is exceptionally easy to manage and an ideal solution for standardization across the global enterprise.

About Uninterruptible Power Supplies

An uninterruptible power supply (UPS) is a device that acts as a defensive barrier between electronic equipment and incoming power problems. It conditions, regulates, and filters out power disturbances to ensure a clean power source for IT equipment. A UPS also provides battery backup in the event of a power failure.

In today’s high availability server environments, unplanned power outages or line quality irregularities can have a considerable financial impact on all- sized businesses. The typical utility power is 99.9% available, but that means that there can be almost 9 hours of downtime a year, not to mention brown-outs and other power quality problems. Selecting the right IBM UPS can help protect against these potentially costly incidents.

Part Number Information

Table 1 shows the orderable part numbers and feature codes for the IBM 2200VA UPS.

The UPS models designated by part numbers 5395-2AX and 5395-2KX include an accessory kit, containing front bezel, rack mount kit with rails and hardware, rack installation instructions, serial cable (3.7 m, 12 ft), USB cable, 4-post rail kit, and remote emergency power-off (REPO) connector. The documentation kit contains a warranty flyer, important notices manual, documentation CD, and software CD, which contains IBM UPS Manager power management software.

Product Usage Instructions

1. Unpack the IBM 2200VA LCD 2U Rack UPS and accessory kit.
2. Install the front bezel, rack mount kit with rails and hardware, and 4-post rail kit as per the rack installation instructions provided in the accessory kit.
3. Connect the serial cable to the UPS and the USB cable to the computer.
4. Configure the device using the bright, easily customizable, and graphical LCD display in one of nine languages (English, French, German, Spanish, Russian, Korean, Japanese, Simplified Chinese, and Traditional Chinese).
5. Use the Advanced Battery Management (ABM) technology to maximize run time for critical devices in the event of a prolonged power outage.
6. Use the real-time clock that enables precise shutdown and power up of systems in a preferred sequence.
7. Record specific power-related occurrences for more accurate trending and data analyses.
8. Integrate with IBM Systems Director Active Energy Manager to help improve energy management.
9. Use the IBM UPS Manager power management software provided in the documentation CD to manage the UPS.

IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x
Product Guide (withdrawn product)
The IBM 2200VA LCD 2U Rack uninterruptible power supply (UPS) delivers 1920 watts of power in only 2U of rack space, providing smart energy management and the highest level of power protection that today’s IT infrastructures require. With an efficiency rating of 95% or greater, the UPS helps reduce energy usage and cooling costs, improves energy management, and optimizes workload performance and availability for IBM System x and BladeCenter server applications. This high-density UPS packs more real power (watts) into a space-saving 2U of rack space to protect more equipment and leaves room for expanding IT systems.
The IBM 2200VA LCD 2U Rack UPS is shown in Figure 1.

Did you know?
The IBM 2200VA UPS has a bright, easily customizable, and graphical LCD display that lets you configure the device and displays important UPS status information in one of nine languages (English, French, German, Spanish, Russian, Korean, Japanese, Simplified Chinese, and Traditional Chinese). The UPS is exceptionally easy to manage and an ideal solution for standardization across the global enterprise.
This UPS enhances system availability with Advanced Battery Management (ABM) technology, which significantly extends battery service life, allows individual control of receptacle groups to maximize run time for critical devices in the event of a prolonged power outage, and provides a real-time clock that enables precise shutdown and power up of systems in a preferred sequence, and records specific power-related occurrences for more accurate trending and data analyses.
The IBM 2200VA UPS integrates with IBM Systems Director Active Energy Manager to help improve energy management.

About uninterruptible power supplies

An uninterruptible power supply (UPS) is a device that acts as a defensive barrier between electronic equipment and incoming power problems. It conditions, regulates, and filters out power disturbances to ensure a clean power source for IT equipment. A UPS also provides battery backup in the event of a power failure.
In today’s high availability server environments, unplanned power outages or line quality irregularities can have a considerable financial impact on all sized businesses. The typical utility power is 99.9% available, but that means that there can be almost 9 hours of downtime a year, not to mention brown-outs and other power quality problems.
Selecting the right IBM UPS can help protect against these potentially costly incidents.

Part number information

Table 1 shows the orderable part numbers and feature codes for the IBM 2200VA UPS.

Table 1. Ordering part numbers and feature codes

Description

|

Part number

|

Feature code

---|---|---

IBM 2200VA LCD 2U Rack UPS (100V/120V)

|

5395-2AX

|

5395-RU2 (FC 6655)

IBM 2200VA LCD 2U Rack UPS (230V)

|

5395-2KX

|

5395-RU2 (FC 6656)

IBM 2200VA UPS 2U External Battery Module (EBM)

|

46M4108

|

5395-RU2 (FC 5732)

IBM LCD UPS Network Management Card (optional)

|

46M4110

|

6145

IBM LCD UPS Environmental Monitoring Probe (optional)

|

46M4113

|

6146

The UPS models designated by part numbers 5395-2AX and 5395-2KX include the following items

• An accessory kit, containing the following items:
  • Front bezel
  • Rack mount kit with rails and hardware
  • Rack installation instructions
  • Serial cable (3.7 m, 12 ft)
  • USB cable
  • 4-post rail kit
  • Remote emergency power-off (REPO) connector
• A documentation kit, containing the following items:
  • Warranty flyer
  • Important Notices Manual
  • Documentation CD
  • Software CD, which contains IBM UPS Manager power management software
• The 100V/120V model includes a IEC 320 C19 to NEMA 5-20P 4.3 m line cord, but other customer ordered line cords can be used.
• The line cords for the 230V model must be ordered separately. See Table 2 for available options.
• Table 2. High-voltage line cords

Features

The IBM 2200VA LCD 2U Rack UPS includes the following features and capabilities:

• It has a high efficiency 2.2 KVA UPS for increased rack power density.
• It occupies only 2U of vertical rack space.
• It has over 95% energy efficiency at 100% load.
• It has an LCD display that provides intuitive, at-the-rack management and monitoring capabilities that supports nine languages:
• English.
• French.
• German.
• Spanish.
• Russian.
• Korean. Japanese. Simplified Chinese. Traditional Chinese.
• It has 10 receptacles:
  • Model 5395-2AX (100V/120V) has six NEMA 5-20R, two IEC 320 C19, and two IEC 320 C13.
  • Model 5395-2KX (230V) has two IEC 320 C19 and eight IEC 320 C13.
• Its bundled intelligent IBM UPS Manager software enhances control and manageability
• It has IPv6 compliance for future proofing IP addressing and security.
• It has a real-time clock that enables precise shutdown and power up of systems in preferred sequence and time stamping on event logs to track and record specific power-related occurrences.
• It integrates with IBM Systems Director Active Energy Manager for power and thermal trending analysis and management.
• Its load segments allow for individual control of receptacle groups, maximizing run time for critical devices.
• It has an optional network management card (part number 46M4140) for enhanced UPS monitoring and control.
• It allows dual channel communication through the USB port and optional Network Management Card at the same time, which is an effective redundancy feature that maximizes communications flexibility.
• It has an optional Extended Battery Module (EBM) for increased runtime requirements.
• It has a Remote Emergency Power Off (REPO) port to remotely power off the UPS unit to prevent battery operation during a power failure.
• It requires a 20A (110V/120V model) or 10A (230V model) single-phase circuit.
• It has hot swap batteries for maximum uptime, availability, and ease of maintenance.
• It has an optional Environmental Monitoring Probe (part number 46M4113) for thermal management requirements (temperature and humidity), which requires that the Network Management Card be installed.
• Its Advanced Battery Management (ABM) three-stage charging technology significantly extends battery service life and optimizes recharge time. The three stages are:

1. The battery is quickly charged to 90% to make sure the UPS is prepared for the next outage.
2. ABM finishes charging the battery with a more moderate float charge.
3. Once the battery is charged, ABM turns the charger off, preventing the batteries from being overcharged.

Specifications

Table 3 lists the specifications for the two 2200VA LCD 2U Rack UPS models.
Table 3. Specifications (Part 1)

Specification| IBM 2200VA LCD 2U Rack UPS (100V/120V)| IBM 2200VA LCD 2U Rack UPS (230V)
---|---|---
IBM part number| 5395-2AX| 5395-2KX
VA/Watts rating| 1920 VA/1920W (120V)

1500 VA/1500W (100V)

| 2200 VA/1920W
Nominal output voltage (Vac)| 100/120V AC| 230V AC
Load groups| Two| Two
Output connections| Six NEMA 5-20R Two IEC 320 C19 Two IEC 320 C13| Two IEC 320 C19 Eight IEC 320 C13
Nominal output voltage regulation| 92-108V (100V)

106-132V (120V)

| 208-253V (230V)
Input
Nominal input voltage

(auto sensing at first power-up)

| 100/120V| 230V
Input frequency (auto sensing)| 50/60 Hz +/- 3 Hz| 50/60 Hz +/- 3 Hz
Input connection Type| IEC 320-C20| IEC 320-C14
Input cords| IEC 320 C19 to NEMA 5-20P 4.3 m| Optional line cords (See Table 2)
Input voltage range, mains operations| 84-121V for 100V

97-145V for 120V

| 160V-286V for 230V
Batteries
Typical backup times| See Table 4| See Table 5
Battery type| Valve Regulated Lead Acid (VRLA) – maintenance-free, sealed, leak-proof
Optional External Battery Pack| Yes, 46M410. Maximum of one EBM can be connected to the UPS.
Typical recharge time| 4 hours to 90% charge from a UPS/battery discharge of 50% rated load
Specification| IBM 2200VA LCD 2U Rack UPS (100V/120V)| IBM 2200VA LCD 2U Rack UPS (230V)
---|---|---
Communications and management
USB HID port| Yes| Yes
RS-232 serial port| Yes| Yes
Ethernet port| Optional using Network Management Card, 46M4110
Environmental Monitoring Probe| Optional Environmental Monitoring Probe, 46M4113
Management software included| IBM UPS Manager
Control panel| Intelligent three-button, dual color, backlit graphical LCD displays vital UPS status in nine languages
Audible alarm| Alarm when on battery: Distinctive low-battery alarm
Remote Power Off (REPO)| REPO port
Surge Protection and Filtering
Surge energy rating| 1200 Joules| 2400 Joules
Filtering| ANSI/IEEE C62.41; 1991 CATEGORYB3 (SURGE)

The following tables list the expected period that the UPS will operate solely on batteries. Table 4 is for the 100V/120V model and Table 5 is for the 230V model.
Table 4. IBM 2200VA UPS (100V/120V) runtime chart

Battery Module (EBM)**
25%| 500 VA| 500 W| 42 minutes| 143 minutes
50%| 969 VA| 969 W| 14 minutes| 66 minutes
75%| 1450 VA| 1450 W| 11 minutes| 43 minutes
100%| 1920 VA| 1920 W| 5 minutes| 28 minutes

Table 5. IBM 2200VA UPS (230V) runtime chart

Battery Module (EBM)**
25%| 550 VA| 500 W| 41 minutes| 138 minutes
50%| 1100 VA| 968 W| 14 minutes| 64 minutes
75%| 1650 VA| 1450 W| 10 minutes| 40 minutes
100%| 2200 VA| 1920 W| 5 minutes| 28 minutes

Note: Battery backup times are approximate and may vary with equipment, configuration, battery age, and temperature.

Physical specifications

• Height: 84 mm (3.3 in)
• Width: 438 mm (17.2 in)
• Depth: 580 mm (22.8 in)
• Weight: 30.5 kg (67.1 lb) / 53952KX – 30.7 kg (67.6 lb)

Operating environment

• The IBM 2200VA LCD 2U Rack UPS is supported in the following environment:

Temperature:

• Operation: 0 to 40 °C (32 to 104 °F)
• Storage: -15° to 30° C (5° to 86° F) – charge the UPS battery every six months
• Storage: 30° to 45° C (86° to 113° F) – charge the UPS battery every three months
• Relative humidity: 5 to 95%
• Maximum altitude:
• Operation: 3,000 m (10,000 ft)
• Storage: 15,000 m (50,000 ft)

Warranty

• The IBM 2200VA LCD 2U Rack UPS has a three-year limited warranty.

Supported rack installation

• The IBM 2200VA LCD 2U Rack UPS requires 2U of rack space in one of the following rack cabinets:
• IBM 42U Enterprise rack
• IBM S2 42U Dynamic rack
• IBM S2 42U rack
• IBM S2 25 U rack
• IBM 11U Office Enablement kit

Front panel controls

IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x (withdrawn product) With a bright and easy-to-navigate panel that provides configurability and displays important status information, the IBM 2200VA UPS is easy to manage and an ideal solution for standardization across the global enterprise. Runtime, load, and other vital information and troubleshooting are also displayed.
Figure 2 shows the front panel of the UPS.

The following functions are available on the control panel

• System status: Displays the battery status, load percentage, output power, output voltage and frequency, mode, notice or alarm status.
• Alarm history: Displays the alarm history for the 50 most recent events.
• Meters: Displays the output watts VA, current, power factor, voltage, frequency, input voltage, input frequency, battery voltage and percentage charged.
• Control screens: Displays the battery test, reset error state, configure load segments, and restore settings.
• Model information: Displays the machine type, model, and serial number of the unit as well as the firmware level of the UPS, including the optional Network Management Card’s firmware level and IP address, if installed.
• Configuration: Allows you to change up to 17 user settings with minimal navigation.

The buttons have the following functions:

• Escape (X): Press this button to return to the previous menu without running a command or saving any changes.
• Down: Press this button to scroll down to the next menu option.
• OK: Press this button to select the current menu or option.
• On/off: Press this button to turn on the UPS. Press and hold this button for 3 seconds to turn off the UPS.
• On some screens, the OK button has an additional function if you press and hold the button longer than 1 second:
• On the User Setting screens, to save the displayed setting.
• On the Meter and Notice/Alarm screens, to lock the screen (prevent the screen from returning to its default after timeout). A locked screen displays a small key image near the status icon. To unlock the screen, press any button to perform its usual function.

Rear panel

• Figure 3 shows the rear panel of the IBM 2200VA LCD 2U Rack UPS (100V/120V).

IBM 2200VA LCD 2U Rack UPS (100V/120V)
Figure 4 shows the rear panel of the IBM 2200VA LCD 2U Rack UPS (230V ).

• The 2200VA UPS comes equipped with intelligent load segments. These individual receptacle groups can be programmed and controlled allowing mission critical devices to be prioritized during shutdown to preserve battery run time. An external battery module can also be added to deliver hours of run time to critical systems during a prolonged power outage.

IBM 2U Extended Battery Module (EBM)

• For applications requiring extended backup times, an external battery module can be added to run connected systems for hours during a prolonged power outage. The IBM 2U Extended Battery Module (EBM) is a 2U rack-mounted device that contains additional batteries. Tables 4 and 5 show the additional run times achieved with the EBM connected. Figure 5 shows the front of the 2U External Battery Module.

Network Management Card

The IBM 2200VA LCD 2U Rack UPS also comes equipped with a communication bay for the installation of an optional Network Management Card (46M4110). The Network Management Card provides convenient over the network UPS remote monitoring and management through a standard web browser. Figure 6 shows the IBM LCD UPS Network Management Card (NMC).

The IBM LCD UPS Network Management Card:

• Allows simultaneous shutdown of protected servers
• Allows configuration of automatic email messages in response to UPS alarms and to transmit periodic reports (see Figure 7)
• Allows control of UPS on/off switching with a web browser
• Allows adjustment and control of load segments through the HTML interface, including sequential starting of the installation and optimization of backup time by shutting down non-priority systems
• Allows protection by using an encrypted password
• Allows protection by using a secure SSL connection
• Allows log storage in the nonvolatile memory
• Allows card firmware updates through the network
• Allows fast Ethernet 10/100 Mbps compatibility with auto-negotiation on the RJ-45 connector
• Allows recording of events and measurements in the card log
• Has a humidity/temperature/dry contact sensor (optional EMP)
• Has support for IPv6
• Can be installed while the UPS is online maintaining the highest system availability

Figure 7 shows the Network Management Card properties window.

IBM UPS Manager software

The UPS comes with the IBM UPS Manager software. The management software provides up-to-date graphics of UPS power and system data and power flow. It also gives you a complete record of critical power events, and notifies you of important UPS or power information. If there is a power outage and the UPS battery power becomes low, the software can automatically shut down the system to protect the data before the UPS shutdown occurs.
Figure 8 shows normal operating using the IBM UPS Manager. The input voltage is 122V, which is within the acceptable range, and is shown in the left pane. The output voltage of the UPS is 121V and is also within the acceptable range. The battery is in “floating” mode, which is the second stage of the Eaton Advanced Battery Management (ABM) three-stage charging technology.

Figure 9 shows that the utility power supply has failed and that the UPS is now operating on battery. The UPS Manager software indicates that there is 10 minutes of battery time available based on the current load.

Figure 10 shows the event notification window where you can configure how you (and other users) want to be notified when certain events occur.

IBM Environmental Monitoring Probe (EMP)
The Environmental Monitoring Probe (EMP) (part number 46M4113) is used to report local temperature and humidity values and make that information available to management tools such as IBM Systems Director Active Energy Manager (AEM). The EMP connects to the UPS via the Network Management Card. The EMP is shown in Figure 11.

The Environmental Monitoring Probe has the following characteristics:

• It connects to the Network Management Card (NMC) settings/sensor connection.
• Its temperature and humidity thresholds are easily set to trigger alarm notifications or shut down the protected system.
• Its status can be monitored from the IBM Systems Director AEM or from the Network Management Card web interface.
• It measures temperatures between 0 and 80°C (32 and 176°F) with an accuracy of ±1°C.
• It measures relative humidity between 10 and 90% with an accuracy of ±5%.
• It can be located away from the UPS with a CAT5 network cable (up to 20 m (65.6 ft)).
• Its user-selectable alarm thresholds enable you to define acceptable temperature or humidity limits.
• It allows email notification through SMTP.

IBM Systems Director Active Energy Manager

• IBM Systems Director Active Energy Manager (AEM) provides an array of new features that allow power and thermal trending analysis for improved power management. AEM collects power information for each device attached to an IBM UPS, presenting a more complete view of energy usage within the data center.
• The IBM Systems Director Active Energy Manager (AEM) helps:
• Collect power information from each device attached to an IBM UPS, thus presenting a more complete view of energy usage.
• With server consolidation plans, because of the increased server and rack power densities that have driven the requirement for advanced power management solutions.
• In combination with the optional Environmental Monitoring Probe, AEM enables cross-platform power and thermal trending analysis for improved power management. This configuration allows IT and facility managers to manage data centers for optimal energy efficiency, migrate workloads to eliminate hot spots, and transfer work from underutilized systems to conserve energy.

Related publications

For more information, refer to these documents:

IBM US Product Announcement

• http://ibm.com/common/ssi/cgi-bin/ssialias?infotype=dd &subtype=ca&&htmlfid=897/ENUS110-159

IBM System x UPS product page

• http://www.ibm.com/systems/x/hardware/options/upsrack.html

IBM 2200VA LCD 2U Rack Uninterruptible Power Supply Installation and Maintenance Guide

• http://www.ibm.com/support/docview.wss?uid=psg1MIGR-5085198

Network Management Card User Guide

• http://www.ibm.com/support/docview.wss?uid=psg1MIGR-5085199

IBM System x Configuration and Options Guide

• http://www.ibm.com/support/docview.wss?uid=psg1SCOD-3ZVQ5W

Related product families

• Product families related to this document are the following:
• Uninterruptible Power Supplies

Notices

• Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

• However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:

• Lenovo (United States), Inc.

• 8001 Development Drive

• Morrisville, NC 27560

• U.S.A.

• Attention: Lenovo Director of Licensing

• LENOVO PROVIDES THIS PUBLICATION ”AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

• Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

• This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

• The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
  Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

• © Copyright Lenovo 2022. All rights reserved.

• This document, TIPS0781, was created or updated on August 16, 2010.

• Send us your comments in one of the following ways:

Use the online Contact us review form found at

• https://lenovopress.lenovo.com/TIPS0781

Send your comments in an e-mail to:

• comments@lenovopress.com
• This document is available online at https://lenovopress.lenovo.com/TIPS0781.

Trademarks

• Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.
• The following terms are trademarks of Lenovo in the United States, other countries, or both:
• Lenovo®
• BladeCenter®
• System x®
• Other company, product, or service names may be trademarks or service marks of others.
• IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x (withdrawn product)
• IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x (withdrawn product)
• Click here to check for updates

Documents / Resources

| Lenovo IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x [pdf] User Guide
IBM 2200VA, LCD 2U Rack Uninterruptible Power Supply for IBM System x, IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x
---|---

References

• IT Infrastructure | IBM
• Uninterruptible Power Supplies > Lenovo Press
• IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x Product Guide (withdrawn product) > Lenovo Press
• IBM 2200VA LCD 2U Rack Uninterruptible Power Supply for IBM System x (withdrawn product) > Lenovo Press
• Copyright and Trademark Information | Lenovo US | Lenovo US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>