POINT Mobile PM75 Rugged Mobile Computer Streamlined User Guide
- June 4, 2024
- POINT Mobile
Table of Contents
POINT Mobile PM75 Rugged Mobile Computer Streamlined User Guide
PM75
V1.0, Sep 2021
Copyright © 2021 Point Mobile Co., Ltd. All rights reserved.
Point Mobile Co., Ltd. is the designer and manufacturer of mobile handheld
devices.
The Point Mobile logo is a registered trademark and symbol of Point Mobile
Co., Ltd.
Features and specifications are subject to change without prior notice.
Device Parts
Product Standard Accessories
Install Battery
Install SIM, SD card
PM75 supports nano SIM and microSD card. (SIM card is supported byy LTE SKU only.)
Turn on / off
Turn on
Press and hold the Power button on the right side of PM75 until SMART BEYOND RUGGED logo displays on the screen.
Turn off
When the screen is on, press and hold the Power button until the power menu is
shown.
Then, tap Power off among the menu.
Charging the Device
- Assemble the AC/DC power supply, country plug and USB type C cable.
- Connect the cable to the USB connector of PM75.
- Provide power by plugging the power supply to the wall socket.
PM75 can be charged with charging cradle (sold separately).
< Caution >
- Always use an original power supply from Point Mobile. Other chargers and cables may damage the PM75. The device warranty does not cover any damage caused by the usage of non-original power supplies.
- Make sure the charger and cable is not wet.
LED Indicator
Scan a Barcode
Scanner is placed on the top of the PM75.
Scanner is disabled by default, so enable the scanner from Scan Settings
first.
Then, press a scan button on the device to scan a barcode. Ideal Aiming
Create the green dot aimer or the cross-hair laser aimer over the barcode.
The entire barcode must be inside the illumination square.
Certification
Model: PM75
Trade name of certified: Point Mobie Co. Ltd.
Manufacturer: Point Mobile
For more certificate information,
go Settings About phone Certificates.
Read More About This Manual & Download PDF: